Browse > Article
http://dx.doi.org/10.9726/kspse.2016.20.6.034

Study on the Correlation of Leakage by the Variation of Inlet Pressure and Clearance in Hydrostatic Bearing  

Yun, Chung-Kug (GyeongJin Highschool)
Bae, Kang-Youl (Dae Myung GENT Co., Ltd.)
Jeoun, Jin-Seong (Dae Myung GENT Co., Ltd.)
Publication Information
Journal of Power System Engineering / v.20, no.6, 2016 , pp. 34-39 More about this Journal
Abstract
This paper is the numerical study on the correlation of leakage by the variation of inlet pressure and clearance in hydrostatic bearing. The main goal of this study is to apply to the design of hydro system the results that the pocket pressure and the leakage rate according to the inlet pressure and the clearance between piston and cylinder tube. Because the hydrostatic bearing in hydraulic cylinder has the narrow rectangular channel between piston and cylinder tube, so to verify the numerical scheme, it has been compared with the experimental results of Brackbill and Kandlikar. The pressure data of numerical results inside narrow rectangular channel correlate was showed a good agreement with experimental results, thereby the numerical scheme was applied to the real model that is a hydraulic cylinder with the hydrostatic bearing. In conclusion, the pressure differences between inlet and pocket were shown within 3%. Leakage rates were showed rapidly increased pattern between about 4.5 and 6.7 times because the section area to calculate the leakage rates were proportioned to a square of diameter. The correlation equation was calculated among the inlet pressure, the clearance and the leakage rate by using the linear regression.
Keywords
Hydraulic Cylinder; Hydrostatic Bearing; Narrow Rectangular Channel; Leakage Rate;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 M. T. Islam and Y. W. Lee, 2009, "Influence of Aspect Ratio on Friction Characteristics in Rectangular Gas Microchannel Flow", Journal of The Korean Society for Power System Engineering, Vol. 13, No. 2, pp. 18-29.
2 T. P. Brackbill and S. G. Kandlikar, 2007, "Effect of Sawtooth Roughness on Pressure Drop and Turbulent Transition in Microchannels", Heat Transfer Engineering, Vol. 28, No. 8-9, pp. 662-669.   DOI
3 K. Y. Bae and J. S. Jeoun, 2015, "Study on the Hydraulic Cylinder Flow Analysis of Orifice Type", Journal of The Korean Society for Power System Engineering, Vol. 19, No. 6, pp. 54-59.   DOI
4 J. W. Jung, H. S. Jeon and Y. S. Bae, 2001, "A Motion control of Hydraulic System using variable orifice", Korea ADAMS User Conference, Vol. 11, No. 8-9, pp. 1-8.
5 Korea Research Council for Industrial Science and Technology, 2013, "Development of intelligent servo actuator for steam control of nuclear/thermal power plants", Korea Institute of Machinery and Materials.
6 M. T. Islam and Y. W. Lee, 2007, "Effect of Aspect Ratio On Gas Microchannel Flow", Journal of The Korean Society for Power System Engineering, Vol. 11, No. 3, pp. 16-21.