• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.444-449
• /
• 2010

The PID control to the monitor color correction was applied. Converted Gamma LUT was applied to the video card. Color and brightness information from the PID controller was used as control inputs. Color and brightness information from a calibrated monitor is measured again. Then, the difference between the preset values for the PID controller was compensated by the feedback. The software measured by color meter was used for color and brightness information. All of the monitor does not measure the color and brightness was measured by sampling. The color and brightness from the monitor were measured not by complete enumeration but by sampling. In the experiment, the original image was displayed on the same monitor as well as two other brands, and then, Gamma and Contrast were measured and compared.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.687-689
• /
• 2003

High resolution satellite images have huge amount of pixels in common. Thus, an efficient method is required for the generation of orthoimages. Patch backprojection method is a feasible way to improve the efficiency with respect to the point-by-point patch backprojection. We will propose an Adaptive Patch that optimizes the patch size for different terrain variations. The essence of the patch optimization is quadrate structuring for terrain variations. The area of interest is, thus, sequentially subdivided to four quadrate tiles until a preset criterion is met. The experiment results indicated that the proposed method is efficient without losing accuracy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.545-546
• /
• 2006

This study was performed to investigate the surface properties of electrochemically oxidized pure titanium by anodic spark discharging method. Commercially pure titanium plates of $10{\times}20{\times}1[mm]$ in dimensions were polished sequentially emery paper. Anodizing was performed at current density of $76.2\;[mA/cm^2]$, application voltage of 290, 350, 400 [V] using a regulated DC power supply, which allowed automatic transition constant current when a preset maximum voltage has been reached. The Ti surface oxided films was characterized by scanning electron microscope(SEM). The precipitation of HA(Hydroxyapatite) crystals on anodized surface was greatly accelerated by hydrothermal treatment. The concentrations of DL-$\alpha$-Glycerolphosphate Magnesiurn(DL-$\alpha$-GP-Mg) salt and Ca acetate in an electrolyte was highly affected the precipitation of HA crystals converted by Ti Anodized oxide films by Shape of Impulse Voltage.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.76-79
• /
• 2018

In this paper, we developed a pressure monitoring system using silicon pressure sensor. The pressure monitoring system was developed on the basis of a microcontroller, and a self-developed silicon pressure sensor was applied. The pressure monitoring system outputs the current pressure value via UART communication. In addition, it includes a function of displaying by LED when the preset three-step pressure (low, medium, high pressure) is reached. The silicon pressure sensor used in the pressure monitoring system was set to 0 kPa, 10 kPa, 26 kPa, and the pressure monitoring system was evaluated because the measured maximum pressure was in the range of 100 kPa.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.109-117
• /
• 2022

This paper proposes a method for detecting flight anomalies of drones through the difference between the command of flight controller (FC) and the navigation solution. If the drones make a flight normally, control errors generated by the difference between the desired control command of FC and the navigation solution should converge to zero. However, there is a risk of sudden change or divergence of control errors when the FC control feedback loop preset for the normal flight encounters interferences such as strong winds or navigation sensor abnormalities. In this paper, we propose the method with a deep neural network model that predicts the control error in the normal flight so that the abnormal flight state can be detected. The performance of proposed method was evaluated using the real-world flight data. The results showed that the method effectively detects anomalies in various situation.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.23-27
• /
• 2022

In this paper, we explore a new type of Android evasive malware based on the Sequential Probability Ratio Test (SPRT) that does not perform malicious task when it discerns that dynamic analyzer is input generator. More specifically, a new type of Android evasive malware leverages the intuition that dynamic analyzer provides as many inputs within a certain amount of time as possible to Android apps to be tested, while human users generally provide necessary inputs to Android apps to be used. Under this intuition, it harnesses the SPRT to discern whether dynamic analyzer runs in Android system or not in such a way that the number of inputs per time slot exceeding a preset threshold is regarded as evidence that inputs are provided by dynamic analyzer, expediting the SPRT to decide that dynamic analyzer operates in Android system and evasive malware does not carry out malicious task.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.171-176
• /
• 2023

This study is about a speech recognition error correction system designed to detect and correct speech recognition errors before natural language processing to increase the success rate of intent analysis in natural language processing with optimal efficiency in various service domains. An encoder is constructed to embedded the correct speech token and one or more error speech tokens corresponding to the correct speech token so that they are all located in a dense vector space for each correct token with similar vector values. One or more utterance tokens within a preset Manhattan distance based on the correct utterance token in the dense vector space for each embedded correct utterance token are detected through an error detector, and the correct answer closest to the detected error utterance token is based on the Manhattan distance. Errors are corrected by extracting the utterance token as the correct answer.

• Journal of Biomedical Engineering Research
• /
• v.34 no.3
• /
• pp.148-155
• /
• 2013

This study is about the development of the wrist rehabilitation system for the patient who has limited capability of movement after stroke. Electromyography triggered training system (ETTS) can play the role between complete passive training and patient activating training system. Surface EMG was measured on pronator teres muscle and biceps brachii muscle for wrist pronation and supination. Our system detects whether the subject makes muscular effort for pronation or supination or nothing in every 50 ms. When the effort level exceeds the preset percentage of maximal voluntary contraction, the motor rotates according to the direction of the intention of the subject. EMG triggers the motor rotation for the wrist rehabilitation training until the preset angle. To evaluate its performance, the maximum voluntary contraction level was measured for 4 subjects at first. With the audio-visual instruction to rotate the wrist (pronation or supination) the subjects made effort to follow the instruction. After calculating root mean square (RMS) for 50 ms, the controller determines whether there was muscular effort to rotate while holding the motor. When there was an effort to rotate, the controller rotates the motor 0.8 degree. By comparing the RMS values from two channels of EMG, the controller determines the rotational direction. The onset delay is $0.76{\pm}0.24$ s and offset delay is $0.65{\pm}0.22$ s for pronation. For supination the onset delay is $1.24{\pm}0.41$ s and offset delay is $0.77{\pm}0.22$ s. The system responded fast enough to be used for rehabilitation training. The controller perceived the direction of rotation 100% correctly for the pronation and 97.5% correctly for supination. ETTS was developed and the fundamental functions were validated for normal subjects. The clinical validation should be done with patients for real world application. With ETTS, the subjects can train voluntarily over the limitation of the range of motion which increases the effectiveness of the rehabilitation training.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.2
• /
• pp.116-124
• /
• 2012

This paper concerns a joint replenishment problem for a single buyer who sells multiple types of items to end-customers. The buyer periodically replenishes the inventory of each item to a preset order-up-to-level to satisfy the end customers' demands, which may be non-stationary. A joint replenishment policy characterized by variable order-up-to-levels is proposed for the buyer who wishes to minimize the expected cost of operating the retail system. The proposed policy starts each period by calculating the expected cost of ordering and not ordering action based on the information of the current inventory position and forecasted demand for the upcoming period. It then takes advantage of an integer programming model to get a cost effective joint replenishment plan. Computer experiment was performed to test efficiency of the proposed policy. When compared with the most efficient policy currently available, our policy showed a considerable cost savings especially for the problems having non-stationary demands.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.301-303
• /
• 2001

In this paper we present a Capacitor Charging Power Supply (CCPS) using a series-resonant three-level inverter topology to improve voltage regulation and use semiconductor switches having low blocking voltage capability such as MOSFETs. This inverter can be operated with two modes, Full Power Mode (FPM) and Half Power Mode (HPM). In FPM inverter supplies the high frequency step up transformer with full DC-link voltage and in HPM with half DC-link voltage. HPM switching method will be adopted when CCPS output voltage reaches the preset target value and operates in refresh mode-charge is maintained on the capacitor. In this topology each semiconductor devices blocks a half of the DC-link voltage[2]. A 15kW, 30kV CCPS has been built and will be tested for an electric precipitator application. The CCPS operates from an input voltage of 500VDC and has a variable output voltage between 10 to 30kV and 1kHz repetition rate at 44nF capacitive load [3]. A resonant frequency of 67.9kHz was selected and a voltage regulation of $0.83\%$ has been achieved through the use of half power mode without using the forced cut off the switch current [1]. The theory of operation, circuit topology and test results are given.