• Phonetics and Speech Sciences
• /
• v.1 no.2
• /
• pp.31-36
• /
• 2009

This study attempted to examine the effects of a portable voice feedback device on the hyperfunctional voice behaviors of children with vocal nodules when they wore the device in their daily lives. The device could set fundamental frequency and intensity at optimal levels for the subjects, It produces an audible alarm for inappropriate hyperfunctional voices beyond the preset levels, In addition, the frequency of hyperfunctional voice behaviors was recorded by the device, therefore the users were able to chart their number of hyperfunctional voice behaviors per day, According to results acquired after having subjects wear the device for 12 weeks, the subjects' frequency of hyperfunctional voice behaviors decreased significantly (p < .01). Especially from the first to fourth week, the frequency of their hyperfunctional voice behaviors declined significantly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.90-96
• /
• 2001

This paper proposes the hybrid fuzzy control system for fast response time and precision control of auto-equipment which exist disturbance, parameter alteration of system, uncertainty. The purposed system, which provides the improvement in terms of the control region in high speed and precision control, first used the fuzzy control method for fast response time and when the error reaches the preset value, used the frequency-locked method for precision control. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably improved performance in the position control of auto-equipment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.190-198
• /
• 2002

In switched reluctance motor(SRM) drive, it is necessary to synchronize the stator phase excitation with the rotor position. Therefore the rotor position information is an essential. Usually optical encoders or resolvers are used to provide the rotor position information. These sensors are expensive and are not suitable for high speed operation. In general, the accuracy of the switching angles is dependent upon the resolution of the encoder and the sampling period of the microprocessor. But the region of high speed, switching angles are fluctuated back and forth from the preset values, witch are cause by the sampling period of the microprocessor. Therefore, the low cost linear encoder suitable for the practical and stable SRM drive is proposed and the control algorithm to provide the switching signals using the simple digital logic circuit is also presented in this paper It is verified from the experiments that the proposed encoder and logic controller can be a powerful candidate for the practical low cost SRM drive.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.183-188
• /
• 2009

In this paper, we preset a method for the development of u-GIS outdoor augmented reality(AR) system. The proposed system is consist of three parts. First, sensor acquisition and calibration for AR, Second, camera and sensor based tracking for AR, Third, integration of sensor information and 3D models. We combine spatial information of real and virtual spaces through u-GIS AR system.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.325-332
• /
• 1996

One of the greatest shortcoming in today's predictive maintenance program is the ability to diagnose the mechanical and electrical problems within the machine when the vibration exceeds preset overall and spectral alarm levels. In this study, auto-diagnosis system is constructed by using A/D converter to convert analog to digital singal. With this device the system analyses input signal to diagonosis machine condition. Many plots, which display machine condition, and input values of every channel are calculated in this system. If the falut is found, the system diagnoses automatically using fuzzy algorithm and trend monitoring. Prediction is also performed by the grey system theory. Operator finds out eh machine operating condition intuitively based on with personal computer CRT in using this system.

• MALSORI
• /
• no.65
• /
• pp.81-91
• /
• 2008

In this paper, we propose a new variable bit-rate speech coder based on the waveform interpolation concept. After the coder extracted all parameters, the amounts of the distortions between the current and the predicted parameters which are estimated by extrapolation using past two parameters are measured for all parameters. A parameter would not be transmitted unless the distortion exceeds the preset threshold. At the decoder side, the non-transmitted parameter is reconstructed by extrapolation with past two parameters used to synthesize signals. In this way, we can reduce 26% of the total bit rate while retaining the speech quality degradation below 0.1 PESQ score.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.16-18
• /
• 2003

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, because the position of rotor is an essential information. In the high-speed region, switching angles are fluctuated back and forth out of the preset value, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.417-420
• /
• 2000

In order to the torque control the indirect flux control was performed by controlling the ratio of e/f and the q-axis flux was estimated by the slip command and q-axis flux was estimated by the slip command and q-axis current in the rotor circuits. Also the frequency was controlled to keep on the q-axis flux to be zero and the constant torque characteristics could be obtained by generation the preset torque. In the induction motor driven by the boltage source inverter with the constant voltage and frequency the speed variation is expressed as a slip So the speed control can be achieved by slip compensation The slip was calculated with a q-flux current filtered by first-order filter and as the result the error problem which may occur in current detection was eliminated

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.29-36
• /
• 2013

In this paper, a new DC offset elimination filter is proposed for an accurate phasor extraction of fundamental frequency component. The proposed method can eliminate a DC offset component which is decayed exponentially. The proposed method uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. Also, the other advantages of the proposed method is that gain compensation or phase compensation is not required after filtering. Simulations using ATP were performed to evaluate the performance of the proposed filter method, and the results were compared to the ones obtained by conventional methods.

• Journal of KIISE:Databases
• /
• v.27 no.2
• /
• pp.238-246
• /
• 2000

The distance join has been introduced previously, which finds nearest pairs in the order of distance incrementally among two spatial data sets built with multidimensional indexes like R-trees. We propose efficient K-distance joins when the number(K) of pairs to find is preset. Especially, we develop a distance join algorithm with bi-directional expansion and optimized plane sweeping using selection method of sweep axis and direction. The experiments on real spatial data sets show that the proposed algorithm is much better than the former algorithms.