• ETRI Journal
• /
• 제28권1호
• /
• pp.51-58
• /
• 2006

In this paper, we propose a method of applying a lifting-based wavelet domain e-median filter (LBWDEMF) for image restoration. LBWDEMF helps in reducing the number of computations. An e-median filter is a type of modified median filter that processes each pixel of the output of a standard median filter in a binary manner, keeping the output of the median filter unchanged or replacing it with the original pixel value. Binary decision-making is controlled by comparing the absolute difference of the median filter output and the original image to a preset threshold. In addition, the advantage of LBWDEMF is that probabilities of encountering root images are spread over sub-band images, and therefore the e-median filter is unlikely to encounter root images at an early stage of iterations and generates a better result as iteration increases. The proposed method transforms an image into the wavelet domain using lifting-based wavelet filters, then applies an e-median filter in the wavelet domain, transforms the result into the spatial domain, and finally goes through one spatial domain e-median filter to produce the final restored image. Moreover, in order to validate the effectiveness of the proposed method we compare the result obtained using the proposed method to those using a spatial domain median filter (SDMF), spatial domain e-median filter (SDEMF), and wavelet thresholding method. Experimental results show that the proposed method is superior to SDMF, SDEMF, and wavelet thresholding in terms of image restoration.

• 열처리공학회지
• /
• 제18권3호
• /
• pp.172-176
• /
• 2005

Modern automobiles are built with a steadily increasing variety of materials and semifinished products. The traditional composition of steel sheet and cast iron is being replaced with other materials such as aluminum and magnesium. But low formability of these materials has prevented the application of the automotive components. The formability can be enhanced by conducting the warm hydroforming using induction heating device which can raise the temperature of the specimen very quickly. The specimen applied to the test is A6061, A7075 extruded tubes which belong to the age-hardenable aluminum alloys. But in the case of A6061 age hardening occurs at room temperature or at elevated temperatures before and after the forming process. In this study the effects of the heating condition such as heating time, preset temperature, holding time during die closing and forming time on the hydroformability are analyzed to evaluate the phenomena such as dynamic strain hardening and ageing hardening at high temperatures after the hydroforming process.

• 한국가금학회지
• /
• 제27권3호
• /
• pp.227-233
• /
• 2000

Preset study was carried out to evaluate characteristics of lactic acid producing bacteria(LAB) in hen's cecum as probiotics value. Distribution of LAB in intestinal tracts was investigated using 5∼25 weeks - old hens. So, 12 strains to LAB with different morphology were isolated purely. Acid tolerance of LAB tested at pH 1, 2, 3, and 4, and bile resistant also tested at 0, 0.3% and 0.5% bile salt concentration. Growth pattern of LAB observed to 60h. All strains of cecal LAB couldn't survive at pH 1, and decreased linearly survival colony after incubation at pH 2 although some strains could survive for 2h. Most of LAB maintained constant number at pH 3 and 4. The bacterial action could increase linearly at 0% bile salt concentration in all of tested strains. However, only one strain could multiply at 0.3% bile salt, others were influenced by bile salt. That tendency was similar at 0.5% bile salt. Growth was peaked at 12 to 18 h after innoculation. After peak, the decreasing pattern of colony was different to strains which some strains decreased rapidly or maintained for long time. The LAB of hen's cecum was similar to intolerance acidity, but different to resistant to bile salt and growth pattern by strain. So, we choose three strains which have probiocs value, and identified as Lactobacillus amylovorus LLA7, Lactobacillus crispatus LLA9 and Lactobacillus vaginalis LLA11.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 1998

In the flue curing process, the wet bulb temperature is usually controlled at a constant level. To improve the quality of flue cured leaves, we studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on physical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high (38℃) and low point (35℃) every one hour cyclically. As a result, the acceleration of the increase in the physical properties of cured leaves were observed. The leaves cured by this method were more or less orange in color, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of cyclic curing method, increase of price per kg reached to 2-3% compared with those of conventional ones.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.19-25
• /
• 1998

The bulk curing experiment to the improve the quality of flue-cured leaves were carried out to evaluate relationship between cyclic curing and conventional curing method. We studied the effect of the cyclic change of wet bulb temperature at the yellowing stage of flue curing on chemical properties of cured leaves. The wet bulb temperature was automatically controlled between preset high($38^{\circ}C$) and low point ($35^{\circ}C$) everyone hour cyclically during 12 hours after starting luring. As a result, the acceleration of the increase in the chemical properties of cured leaves were observed. As to the chemical properties, there was decreased in citric acid, increased in malic acid of the nonvolatile organic acids and all higher fatty acids content of leaves cured by this method compared with in that of conventional curing method, while a major chemical compounds in relation to aromatic essence of cigarette smoke in essential oil components of lured leaves was mostly higher in this method than those of conventional ones, and it was evaluated that there was decreased in CO, TPM, Tar, and $CO_2$ content of the cigarette smoke comparing to the conventional luring method.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.175-181
• /
• 2005

본 논문에서는 자동화 시스템의 고속 정밀 제어를 위한 퍼지-PLL 제어기를 제안한다. 기존의 PLL 제어기는 넓은 데드존 때문에 지터 잡음을 발생하고, 긴 지연시간 때문에 고속 동작의 정밀제어에는 부적합 하다. 본 논문에서는 이러한 문제를 해결하기 위하여, 제어영역을 고속 제어와 정밀제어 영역으로 구분한다. 먼저 퍼지 제어 기법을 적용하여 신속한 과도응답을 수행하고, 오차가 설정된 범위에 진입하면 새로운 위상 주파수 검출기를 설계한 PLL 제어기를 사용하여 정밀제어를 수행한다. 제안된 다중 구조의 위상 주파수 검출기는 데드존과 지터 잡음을 개선하고, 상승 에지에서 동작하는 P-PFD와 하강 에지에서 동작하는 N-PFD로 구성하여 PLL의 응답 특성을 향상 시킨다.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.117-121
• /
• 2015

$O_2$-deficiency related accidents occur every year and the most effective way to prevent them is to measure $O_2$ concentration in air with a properly-calibrated $O_2$ monitoring device before entering low-$O_2$ areas. An electro-chemical sensor, Texas Instrument gas platform, and iPhone are used to construct a smartphone-based $O_2$ monitoring device. The smartphone based $O_2$ measuring approach offers advantages of small size, accessibility, internet-connectivity, and programmability in comparison to conventional $O_2$ measuring devices. Multiple gas sensors can be conveniently interfaced to single smartphone, allowing for creating a network of gas sensors distributed across workplaces and remote monitoring via existing mobile communication network. To check proper function of the $O_2$ monitoring device the sensor was exposed to shallow and deep human breaths. The readings decreased immediately after being exposed to exhalation and recovered during inhalation to a calibrated level of 20.9%. When readings decreased below a preset warning value of 19.5%, a low $O_2$ warning was successfully activated on the smartphone.

• Journal of Yeungnam Medical Science
• /
• 제11권1호
• /
• pp.181-185
• /
• 1994

저자들은 완전방실블록 환자에서 쌍극의 영구심장박동기를 이식후에도 계속되는 실신발작을 보여 단극의 영구심장박동기로 바꾼 후 그 증상이 소실된 예를 경험하였기에 이를 보고하는 바이다.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.30-35
• /
• 2004

스위치드 릴럭턴스 전동기(SRM)의 구동에서 회전자 위치는 필수적인 정보로서 회전자의 위치에 따라 고정자의 상여자 신호를 동기화 시키는 것이 매우 중요하다. 이를 위해 고해상도의 엔코더나 레졸버가 이용되는데 이는 전동기의 생산가격 상승을 가져오게 된다. 반면 센서리스 기법을 통한 상여자신호의 동기화는 신뢰성 및 고속영역에서 스위칭각이 마이크로프로세서의 샘플링 주기에 의해 영향을 받게 된다. 본 논문에서는 실용적인 방식의 저가형 아날로그 엔코더를 제안한다. 또한 간단한 디지털회로를 사용한 제어신호를 생성하기 위한 제어알고리즘을 제시한다. 실험을 통하여 제안된 아날로그 엔코더의 성능을 검증하고 이를 이용한 스위칭각 제어방법에 대해 검증하였다.

• Journal of Communications and Networks
• /
• 제18권6호
• /
• pp.902-912
• /
• 2016

Recent advances in energy harvesting (EH) technology have motivated the adoption of rechargeable mobile devices for communications. In this paper, we consider a point-to-point (P2P) wireless communication system in which an EH transmitter with a non-ideal rechargeable battery is required to send a given fixed number of bits to the receiver before they expire according to a preset delay constraint. Due to the possible energy loss in the storage process, the harvest-use-and-store (HUS) architecture is adopted. We characterize the properties of the optimal solutions, for additive white Gaussian channels (AWGNs) and then block-fading channels, that maximize the energy efficiency (i.e., battery residual) subject to a given rate requirement. Interestingly, it is shown that the optimal solution has a water-filling interpretation with double thresholds and that both thresholds are monotonic. Based on this, we investigate the optimal double-threshold based allocation policy and devise an algorithm to achieve the solution. Numerical results are provided to validate the theoretical analysis and to compare the optimal solutions with existing schemes.