• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.30.4-31
• /
• 2021

We will present a scenario of the presence of a second AGN in a nearby Seyfert galaxy, NGC 1068. Using VLT/MUSE IFU data, we investigated the complex kinematics of ionized gas in the central region of NGC 1068. Interestingly, at a distance of 180 pc to the northeast from the nucleus of NGC 1068, we detected a kinematical signature of the launching point of AGN gas outflows, which suggests that there would be a second AGN. We will also discuss another supporting evidence of the second AGN based on previous spectropolarimetric results.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.100-109
• /
• 1994

In this study, it is investigated that the possibility of the numerical simulation for the incineration of the hazardous material, crbon tetrachloride($CCl_4$). A 3-dimensional numerical technology is applied for turbulent reacting flows of the full-scale Dow Chemical incinerator. The calculations are made by a CRAY-2S, super computer. The major parameters considered in this study are kiln revolution rate (rpm), filling ratio of the solid waste(f), burner Injection velocity and angle, and turbulent air jets for swirl. And the employed turbulent reaction model is the eddy break-up model which is a kind of fast chemistry model assuming general equilibrium and used for a premixed flame. The calculated flow fields are presented and discussed. 1) The presence of turbulent air nozzles for swirl gives rise to visible increase of the convective motion over the region of the solid waste. This implies the possibility to enhance the mixing of the waste with the surrounding all and thereby to reduce thermal and species stratification, which were reported in a large rotary kiln operation. 2) Considering that the location of the recirculation region has a strong relation with the heating rate of the solid waste, the control of the recirculation region by the burner injection angle Is quite desirable in the sense of the flexible design of the rotary kiln incinerator for a carbon tetrachloride. 3) Finally, it is found that the eddy break-up model Is not suitable for carbon tetrachloride($CCl_4$) because this model is not incorporated the flame inhibition trend due to the presence $CCl_4$compound.

• Korean Journal of Plant Resources
• /
• v.33 no.6
• /
• pp.578-585
• /
• 2020

This study was designed to assess the possibility of using medicinal plant extracts as β-lactamase inhibitors to control antibiotic-resistant Staphylococcus aureus. The susceptibilities of S. aureus ATCC 15564 (SA^WT), ciprofloxacininduced S. aureus ATCC 15564 (SA^CIP), oxacillin-induced S. aureus ATCC 15564 (SA^OXA), and clinically-isolated S. aureus CCARM 3008 (SA^CLI) to ampicillin were determined in the absence and presence of medicinal plant extracts, including Cleyera japonica (CJ), Carpinus laxiflora (CL), Euphorbia helioscopia (EH), Euscaphis japonica (EJ), Oenothera erythrosepala (OE), and Rosa multiflora (RM). The phenotypic change in the clear inhibition zones around ampicillin disc was observed for SA^WT, SA^CIP, and SA^OXA, indicating the production of ampicillinase. Compared to the controls, the MICs of ampicillin against SA^WT, SA^CIP, and SA^OXA were decreased from 4 to 0.5 ㎍/mL in the presence of CL, 16 to 4 ㎍/mL in the presence of RM, and 32 to 2 ㎍/mL in the presence of CL, EH, and RM, respectively. The medicinal plant extracts, OE, EJ, and CL, effectively inhibited the β-lactamase activities of SA^WT (78%), SA^CIP (57%), and SA^OXA (76%) when compared to the control. This results suggest that the medicinal plant extracts can be used as BLIs to control the antibiotic-resistant S. aureus.

• The Korean Journal of Ecology
• /
• v.19 no.6
• /
• pp.519-527
• /
• 1996

To examine the possibility of biomonitoring of heavy metal removal ability and soil, a study was performed to investigate the heavy metal removal ability and metal-binding protein (MBP) as detoxification process using Oenanthe stolonifera. After O. stolonifera was exposed to individuals (cadmium, zinc) and mixture (cadmium+zinc)for 4 days, removal rate of heavy metal and pH in the treatment medium was measured. MBP was assayed by means of ion exchange column chromatography. The exposure to mixture (Cd:76.8%, Zn:75%) rather than individuals (Cd:82.9%, Zn:90.4%) showed a synergism raising the toxic effect. Initial removal rate was different for each heavy metal : in case of exposure to cadmium it was over 60% on day 1, while for zinc it was 75~90% on day 4. Throughout the experimental period, pH value of treatment medium continuously decreased, since cortex in the roots may secret organic acid to adjust and prevent toxicity of metals. The existence or MBP in the 70~80 fraction and the presence of Zn-enzyme pool was ascertained with the column chromatography. This study demonstrated a possibility that heavy utilized as a biomarker of heavy metal pollution.

• Reproductive and Developmental Biology
• /
• v.28 no.2
• /
• pp.133-137
• /
• 2004

Sexing from bovine embryos which were fertilized in vitro implicate a possibility of the sex-controlled cattle production. This study was carried out to investigate the possibility of determining of embryo sex by fluorescence in situ hybridization (FISH) technique. FISH was achieved in in vitro fertilized bovine embryos using a bovine Y-specific DNA probe which constructed from the btDYZ-1 sequences. To evaluate Y-chromosome specificity of the FISH probe, metaphase spreads of whole embryos and lymphocytes were prepared and tested. A male-specific signal was detected on 100% of Y chromosome bearing metaphase specimens. Using the FISH technique with a bovine Y-specific probe, 232 whole embryos of 8 cell- to blastocyst-stage were analyzed. Observing the presence of the Y-probe signal on blastomeres, 102 embryos were predicted as male, and 130 embryos as female. The determining rate of embryo sex by FISH technique was about 93% regardless of embryonic stages. In conclusion, the FISH using a bovine Y-specific DNA probe is an accurate, reliable and quick method for determining the sex of bovine embryos.

• Structural Engineering and Mechanics
• /
• v.77 no.4
• /
• pp.463-472
• /
• 2021

Fully rigid floor diaphragm is one of the main assumptions that are widely used in common practices due to its simple application. However, determining the exact degree of diaphragms flexibility cannot be easily accomplished without finite element modeling, which is an expensive and time-consuming procedure. Therefore, it is always possible that apparently rigid diaphragms, based on prescriptive limitations of seismic codes, experience some degrees of flexibility during the earthquakes. Since diaphragm flexibility has more uncertainties in asymmetric-plan structures, this study focuses on errors resulting from probable floor diaphragm flexibility of torsionally restrained structures. The analytical models used in this study were single-story buildings with asymmetric plan and RC shear walls. Although floor system is not considered explicitly, a wide range of considered diaphragm flexibility, from fully rigid to quite flexible, allows the results to be generalizable to a lot of lateral load resisting systems as well as floor systems. It has been shown that in addition to previously known effects of diaphragm flexibility, presence of orthogonal side elements during design procedure with rigid diaphragm assumption and rapid reduction in their absorbed forces can also be an important source to increase errors due to flexibility. Accordingly, from the obtained results the authors suggest designers to consider the possibility of diaphragm flexibility and its adverse effects, especially in torsionally restrained systems in their common designs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.111-115
• /
• 2022

Objectives: The purpose of this study is to verify whether droplet-induced propagation, the main route of infectious diseases such as COVID-19, can occur in semiconductor FAB (Fabrication), based on research results on general droplet propagation. Methods: Through data surveys droplet propagation was modeled through simulation and experimental case analysis according to general (without mask) and mask-wearing conditions, and the risk of droplet propagation was inferred by reflecting semiconductor FAB operation conditions (air current, air conditioning system, humidity, filter conditions). Results: Based on the results investigated to predict the possibility of spreading infectious diseases in semiconductor FAB, the total amount of droplet propagation (concentration), propagation distance, and virus life in FAB were inferred by reflecting the management parameter of semiconductor FAB. Conclusions: The total amount(concentration) of droplet propagation in the semiconductor fab is most affected by the presence or absence of wearing a mask and the line air dilution rate has some influence. when worn it spreads within 0.35~1m, and since the humidity is constant the virus can survive in the air for up to 3 hours. as a result the semiconductor fab is judged to be and effective space to block virus propagation due to the special environmental condition of a clean room.

• Journal of Veterinary Science
• /
• v.25 no.1
• /
• pp.7.1-7.7
• /
• 2024

Background: Infections of cats with Echinococcus granulosus is uncommon because the cat is not part of the parasite life cycle that a carnivorous and another herbivore represent. Nevertheless, it occurs incidentally when eating food or drinking water contaminated with the worm's larva, especially with the presence of the definitive host (dogs), in this case, the infections are concentrated in stray or outside cats. For this reason, this study examined the possibility of cat infection with E. granulosus and diagnosed the common genotype of this infection. Objective: This study examined the possibility of cat infection with E. granulosus and diagnosed the common genotype of this infection. Methods: Four of the 37 cats that had died in different accidents developed cystic echinococcosis (CE). The cytochrome c oxidase subunit I (COX1) gene was initially amplified and sequenced to determine if these cysts belonged to E. granulosus, in beginning. The DNA fragments resulting from sequencing were then compared and aligned with other sequences using the Gene Bank database. Finally, a phylogenetic tree was drawn according to the sequence data obtained from cox1 genes sequencing, and the MEGA 7.0 phylogenetic analysis program was utilized. Results: Four different sequences were deposited in the Gen Bank with accession numbers (ON795961 to ON795964), all of which belong to the G1 genotype. Approximately 84% and 100% of these sequences aligned with G1 (AB622277.1) and G1 (MG722980.1), respectively. Conclusions: G1 is the dominant genotype that causes cat infections, even though the cat's EC infection was incidental.

• Journal of Embryo Transfer
• /
• v.14 no.1
• /
• pp.1-8
• /
• 1999

The efficiency of transgenic livestock animal production may be improved by early selection of transgenci preimplantation embryos. To examine the possibility of GFP gene as a non-invasive marker for the early screening of transgenic embryo, the GFP gene was microinjected into rabbit zygotes and the later stages of preimplantation embryos were examined for the expression of GFP. The presence of injected DNA was detected by PCR analysis and the expression of GFP was detected by observing green fluorescence in embryos under a fluorescent microscope. Out of 108 GFP gene-injected rabbit zygotes, seventy three(67.6%) were fluorescence-positive. When 11 fluroresecence-positive blastocysts were analyzed for the presence of GFP gene by PCR, 6(54.5%) were positive, and all of the 8 flrouescence-negative blastocysts were also negative by PCR. The results indicate that the screening of transgene in rabbit embryos by PCR analysis and GFP detection could be a promising method for the preselection of transgenic embryos.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.309-316
• /
• 2019

Virtual Reality is broadly recognized as an "empathy machine". This reputation is due to the feeling of 'presence' that it provides to users, which is the sensation of being bodily present in a space, even when that space is virtual. The possibility of complete immersion attracts many creators looking to induce empathy and awareness about the most diverse subjects. One of the first types of VR non-fiction productions to be released was in the morally sensitive humanitarian documentary genre. This research aims to explore how VR productions differ from non-VR productions with a focus on humanitarian communication. Rather than targeting mechanical aspects of VR technology, this article compares the visual and narrative storytelling characteristics in VR and non-VR media. First, humanitarian communication and its nuances are explained. Then, 360° video filming characteristics are analyzed, followed by a comparison table contrasting VR and non-VR non-fiction. After evaluating VR non-fiction empirical studies, a discussion is initiated over the betterment of VR non-fiction storytelling in a way that could help it generate more empathy, since many productions seem to purely rely on the technology as a production novelty, and end up lacking emotional depth and audience engagement through story.