Mesh generation for the region of interest is prerequisite for numerical analysis of governing partial differential equations describing phenomena with proper physic. Mesh generation is, however, usually considered as a major obstacle for a routine application of numerical approaches in Engineering applications. Therefore automatic mesh generation is highly pursued. In this paper automated quadrilateral surface mesh generation is proposed. According to the present method, Cartesian cells of proper resolution for a region bounding the whole region of interest are first generated and the interior cells are identified. Then projecting their surface meshes onto the boundary surfaces gives surface mesh consisting of quadrilateral cells. This method has been implemented as an application program, and example cases are given.
The results of a discussion among parties involved in the Industrial Educational Cooperation Program are as follows: 1. Ensure that students in the Continuing Education System have certain work experience as a prerequisite for admission. 2. Studies and evaluation methods should be diversified in order to give students better selection of lectures and credits. 3. Re-education system should be established, and a degree conferred through development of human resources and study terms. 4. Educate students by cooperating between the union of industries and that of the colleges. 5. Students are satisfied about the intensive study by $\ulcorner$2+2$\lrcorner$ joint education which connects junior college and university. 6. Put into practice creative technical education for technological development by learning their classroom studying just as actual practice in the industrial field. I offer strategies for settlement of the Industrial Trust Education mentioned above, and urge the Ministry of Education to comply.
Major hazards existed in slaughterhouse are pathogenic microorganisms originated from intestinal microflora of slaughtered animals. This study was intended for the identification of microbial contamination sources during pork slaughtering in small plants. Total aerobic bacteria, Coliform group, Salmonella spp, Listeria monocytogenes, and Campylobacter jejuni/coli were isolated from the surface sample of pork carcasses. Contamination level among different sampling points of ham, belly and neck did not showed statistical differences. Therefore, the mixed sampling from belly and neck of carcass could be effective for microbiological monitoring. Isolation rates of pathogenic microorganisms showed Salmonella spp 20.9%, Listeria monocytogenes 10.5%, and Campylobacter jejuni/coli 8.1% from 296 sampling points. High prevalence rate of Salmonella spp indicated that the contamination of intestinal microflora occurred due to unsanitary processing control, which required HACCP system in small plants. It was recommended that the prerequisite program should be a key factor for a successful HACCP system implementation especially in small size slaughterhouse.
Journal of the Korean Society for Aviation and Aeronautics
/
v.28
no.4
/
pp.154-163
/
2020
The pilot's aeronautical decision-making during the flying greatly affects flight safety, and the importance of situational awareness has been greatly emphasized as a prerequisite for making the right decision. This is the reason why more research and interests are needed to help students entering the pilot training program develop excellent situational awareness from the initial stage of training. Situational awareness is closely related to long-term memory activities in human information processing, and pedagogy and cognitive psychology have emphasized the encoding techniques as an effective long-term memory method. This study was conducted to confirm whether pilot students' using the encoding techniques to learn flight education materials in the early stage of their training at domestic universities has a positive effect on improving their situational awareness.
It is prerequisite of orthodontists to diagnose malocclusion correctly and make treatment plans accurately for treating maloccluded patients efficiently and earning more stable and better results. Recently computers were introduced in orthodontic diagnosis steps, which enabled orthodontists to get more precise diagnosis, to make more accurate treatment planning and to provide better orthodontic cares for more patients. The authors studied on the diagnostic analysis methods which have been used frequently in Korea and made a diagnostic computer program including the horizontal and/or vertical measurement of length, degrees and proportions in lateral cephalometric radiographs, the analysis of the skeletal and soft-tissue features and the evaluation of the treatment results. We also made a scheduling program for arrangement and management of patients. 40 skeletal and 24 soft-tissue landmarks were selected in a lateral cephalometric radiographs. The available analysis methods in this program are Angular analysis, Linear analysis, Ricketts analysis, Profilogram , Steiner analysis, Tweed analysis, MacNamara analysis, Open bite analysis, Kim's diagnosis, Skeleto-dental cephalometric analysis and Height & weight analysis. We suggested that this diagnostic computer program make it possible for orthodontists to get more rapid and accurate diagnostic analysis and treatment planning and for patient to earn better and more efficient orthodontic service.
Background: Mammography screening is a method for reducing breast cancer mortality in women over 40 years old. A participation rate of at least 70% is a prerequisite for screening programs. This study aimed at determining the participation rate of women in breast cancer screening in Iran. Materials and Methods: The study population in this prospective research consisted of 35 to 69 years old women in the villages and towns Kerman District, in 2013. The data were collected by a well-validated risk assessment questionnaire. The questionnaires were completed with the help of health workers and technicians in the health centers, who were trained on breast cancer screening program. Results: As a whole, 19,651 women were invited to complete the questionnaire, of whom 15,794 women (80.37%) completed it. In the urban region, of 3150 eligible women 2728 women (86.60%) participated in the study. The acceptance rates for mammography in rural and urban regions were 34.95% and 8.75%, respectively. Conclusions: Finally, 3.8% and 16.34% of 35 to 69 years old women in the urban regions were mammographed, respectively. Conclusion: The low participation of eligible women in breast cancer screening program alerts us against including the program in the health insurance package.
In a PWR rod cluster control assembly(RCCA) for shutdown is released upon action of control rod drive mechanism and falls down through the guide thimble by its weight. Drop time and impact velocity of the RCCA are two key parameters with respect to reactivity insertion time and the mechanical integrity of fuel assembly. Therefore, the precise control of drop time and impact velocity is prerequisite to modifying the existing design features of the RCCA and guide thimble or newly designing them. During its falling down into the core, the RCCA is retarded by various forces acting on it such as fluid resistance caused by the RCCA movement, buoyance and mechanical friction caused by contacting inner surface of the guide thimble, etc. However, complicated coupling of the various forces makes it difficult to derive an analytical dynamic equation for the drop time and impact velocity. This paper deals with the development of a computer program containing an analytical dynamic equation applicable to the Korean Fuel Assembly(KOFA). The computer program is benchmarked with an available single control rod drop tests. Since the predicted values are in good agreement with the test results, the computer program developed in this paper can be employed to modify the exiting design features of the RCCA and guide thimble and to develope their new design features for advanced nuclear reactors.
Of great importance in food safety culture are the values of an organization regarding food safety that combine the human and material requirements needed to produce safe and hygienic foods. In recent years, efforts have been made to improve the level of implementation of food safety management systems by improving certain cultural elements of food safety. This study investigated the current state of food safety culture in the HMR manufacturing sector. An anonymous survey of 46 HMR manufacturers of various sizes was conducted to evaluate the implementation status of HACCP prerequisite program and food safety culture. The perceived importance of food safety culture factors and their performance were also surveyed. Employees of HMR manufacturers who participated in this survey recognized that the participation of employees and leadership was the most important factor in ensuring food safety. Smaller enterprises are less aware of the importance of such organizational culture. The survey shows that food safety culture indicators in large companies are generally higher than those of small and medium enterprises. Especially, the manager's level of commitment to food safety, resources input, and education and training was significantly higher than that found at small companies (p=0.005). Among the food safety culture evaluation factors, it was found that education and training had significant influence on HACCP prerequisite program performance. Continued employee education and training on food safety and hygiene are important for HMR manufacturers to achieve HACCP certification standards.
Hyperlipemia is the most leading risk factor of cardiovascular disease which is the main cause of death in Korea. However, there is a tendency to neglect the prevention and treatment since it has no specific symptoms. It has been reported that the level of serum-lipid can be lowered by the improvement of eating habits. Therefore, it is highly likely that the development of programs on the improvement of eating habits through behavioral theory is required to the community nursing practice. The theory of planned behavior, which assumes that human behaviors are determined by one's intention to carry out the behavior, can be characterized by the point that behaviors are not only individual factors but also social behaviors relating to subjective norms. It is widely recognized that this theory has a high predictability on health behavior due to it's simplicity clearness, and measurability as well as high quality of being general. Thus, the theory of planned behavior could be useful in developing a model of a health promotion program to the change of behaviors of the risk group of cardiovascular disease. Consequently, based on the theory of planned behavior, the purpose of this study is to develop an intention promotion program of the diet, and then to testify the effects. The sample of this study consisted of 26 industrial workers who had proved hyperlipemia from a medical examination in 1996 (experimental group 13, control group 13). The intention promotion program, which includes education, monitoring, pressure, counselling on the level of individuals, families and organizations, was conducted for 10 weeks The purpose of this program was to promoting intention of the diet through changes of the prerequisite factors of intention such as behavioral belief, outcome evaluation, normative belief and control belief. When it came to data analysis, the ${\chi}^2$-test and Fisher's Exact test were used to compare the general characteristics between the experimental and the control group, an independent t-test for the other variables. ANOVA was used to the test hypothesis, and the Pearson correlation test for variable's correlation. The results of this study can be summarized as follows ; 1) There was a significant increase in the intention(F=18.51, p=.00) of diet in the experimental group. 2) Diets(F=32.51, p=.001) in the experimental group were better carried out than in the control group. 5) There was a moderate correlation between the intention of diet and performance (r=.587. p=.003). From the results, it can be concluded that the intention promotion program is very effective, leading to the change of health promotion behavior. Above all, it is really valuable that the intention promotion program in this study regards health promotion behavior as a social behavior and that intervention was done on the level of family and organization. Consequently, when performing a health promotion program, social approach elevating the intention should go hand in hand in order to make the program effective.
Application of vaccine materials through oral mucosal route confers great economical advantage in animal farming industry due to much less vaccination cost compared with that of injection-based vaccination. In particular, oral administration of recombinant protein antigen against foot-and- mouth disease virus (FMDV) is an ideal strategy because it is safe from FMDV transmission during vaccine production and can induce antigen-specific immune response in mucosal compartments, where FMDV infection has been initiated, which is hardly achievable through parenteral immunization. Given that effective delivery of vaccine materials into immune inductive sites is prerequisite for effective oral mucosal vaccination, M cell-targeting strategy is crucial in successful vaccination since M cells are main gateway for luminal antigen influx into mucosal lymphoid tissue. Here, we applied previously identified M cell-targeting ligand Co1 to VP1 of FMDV in order to test the possible oral mucosal vaccination against FMDV infection. M cell-targeting ligand Co1-conjugated VP1 interacted efficiently with M cells of Peyer's patch. In addition, oral administration of ligand-conjugated VP1 enhanced the induction of VP1-specific IgG and IgA responses in systemic and mucosal compartments, respectively, in comparison with those from oral administration of VP1 alone. In addition, the enhanced VP1-specific immune response was found to be due to antigen-specific Th2-type cytokine production. Collectively, it is suggested that the M cell-targeting strategy could be applied to develop efficient oral mucosal vaccine against FMDV infection.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.