• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.85-93
• /
• 2007

The purpose of this study was to evaluate the microleakage of root-end filling material filled in blood contaminated root-end cavity and self-etching adhesive placed over blood contaminated resected root apices without root-end preparation. Extracted, human maxillary incisors, canines and mandibular premolar were randomly divided into four groups of 15 teeth each. After canal preparation, resection of the apex and root-end preparation, MTA and IRM were filled in the root-end cavity (A and B group). After canal preparation and resection of the apex, Clearfil SE Bond and Prompt L-Pop were applied over the contaminated root-end surfaces (C and D group). The roots were then subjected to 15cm of water pressure to simulate periapical microleakage stress. Data were analyzed using one-way ANOVA. The results were as follows : 1. All groups showed a tendency of decreasing microleakage in process of time after 2weeks later except IRM group. 2. After 2 weeks and 1 month, MTA group showed less microleakage significantly than other groups(p<0.05). After 2 months, Prompt L-Pop group showed less microleakage significantly than other groups(p<0.05). 3. After 9 months, there were no significant differences among four groups(p>0.05). Thus it is considered that apical sealing using adhesives system without root-end preparation is good method in endodontic surgery.

• 한국융합학회논문지
• /
• 제9권3호
• /
• pp.217-222
• /
• 2018

본 논문에서는 정확한 수의 희귀 세포 포집 및 이송을 위한 마이크로 폴리머 칩 플랫폼의 디자인과 제작, 그리고 프로토콜을 소개하고 있다. 본 플랫폼과 프로토콜은 기존의 통계학적인 샘플 준비 방법인 희석(Dilution)의 한계와 고가이며 형광염색이 요구되는 유세포분석기(Fluorescence activated cell sorter)의 단점을 극복하였다. 타켓 세포를 선택적으로 쉽고 간단하게 채집할 수 있으며 채집되는 세포의 수는 시각적으로 검증되므로 매우 정확한 방법이다. 또한, 채집된 세포들은 마이크로 챔버 등의 원하는 곳으로 세포의 손실 없이 이송 또는 주입 시킬 수 있다. 본 연구는 암진단 등을 목적으로 하는 칩 속의 실험실(Lab on a chip) 등에 필요한 희귀 세포 샘플 준비를 위해 활용 될 수 있을 뿐만 아니라 세포분석을 위한 싱글/더블/다수 세포 샘플의 준비에도 활용 가능하다. 본 논문에서 제시하는 세포 채집 플랫폼과 프로토콜을 검증하기 위해 5개의 인간 암세포(MCF-7)를 채집한 뒤 세포계수기(Hemocytometer) 안으로 주입시켜 세포의 수를 확인하였다.

• Industrial Engineering and Management Systems
• /
• 제8권2호
• /
• pp.109-120
• /
• 2009

As the use of 3DCAD data became widespread in designing products in manufacturing, attempts have been made to shorten lead time and reduce cost of production preparation utilizing 3DCAD data for launching assembly lines. In order to create assembly plans not only efficient but easy for operators to operate ('easy-to-operate'), this study presents approaches, methods, and systems for creating 3DCGAs (3 Dimensional Computer Graphic Animations) which automatically utilize a prototype-free production preparation methodology. Characteristics of this study include that it proposes the methodology for creating assembly operation 3DCGAs automatically, for all the possible assembly operations corresponding each of the possible assembly sequences first. Using the created 3DCGAs, the study next considers assembly methods by evaluating how easy or 'operator friendly' they are in implementing, and devises tools or jigs to be used, and plans efficient assembly line organization. The concept of the methodology was formed by focusing on the value-adding assembly steps at which parts turn into products directly. The study also validates the effectiveness of the presented methodology by employing the methods used in actual production preparation process in businesses, and proves that an efficient assembly line can be organized in a shorter period of time utilizing the developed system and by preparing easy-to-operate and efficient plans in 3DCGAs at the design stage.

• Human Ecology Research
• /
• 제61권3호
• /
• pp.401-414
• /
• 2023

This study examined the sequential mediation effects of academic achievement attribution and career decision-making self-efficacy on the effect of paternal and maternal helicopter parenting on high-school students' career preparation behavior. A total of 285 (119 male and 166 female) Korean high-school students in the second grade participated in the study. Research variables were measured using the Career Preparation Behavior Scale (Kim, 1997), Helicopter Parenting Scale (LeMoyne & Buchanan, 2011), Attribution Questionnaire (Weiner, 1979), and Career Decision-Making Self-Efficacy Scale-Short Form (Betz et al., 1996). To examine the sequential mediating effect, data analysis was performed using SPSS 29.0 and PROCESS MACRO (v4.2) Model 6. The results revealed no correlations between helicopter parenting and academic failure attribution. However, higher paternal and maternal helicopter parenting were found to indirectly reduce high-school students' career preparation behavior through lower internal academic success attribution (effort and ability) and higher external academic success attribution (task difficulty and luck), which reduced career decision-making self-efficacy. These findings can be employed to develop more effective intervention programs comprising career guidance for adolescents, which emphasizes the negative effect of helicopter parenting. This study expands the research field, as previous findings on helicopter parenting mostly focus on college students.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.447-452
• /
• 1987

${\alpha}$-Al2O3 powder was produced at 1000$^{\circ}C$ by the boehmite sol-gel process with seeding 2 wt% ${\alpha}$-Al2O3. The processes and mechanisms of fornation of ${\alpha}$-Al2O3 was investigated using DTA/TG, XRD, TR spectroscopy and thermodynamic analysis. The specific surface area of the obtained ${\alpha}$-Al2O3 was 16.3㎡/g.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.622-624
• /
• 2003

Poly(lactic acid) is a biodegradable themoplastic based on the renewable resources to substitute for petrochemical plastics. Most of PLA is produced by ring opening polymerization from lactide. However, pyrolysis process in the lactide synthesis is expensive, we studied lactide synthetic process for more economical preparation of PLA. In this research was tried to minimize the pyrolysis time, and obtained L-lactide from lactic acid without any catalyst.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.392-393
• /
• 2006

Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the sysmatic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2002년도 High Temperature Superconductivity Vol.XII
• /
• pp.86-86
• /
• 2002

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.611-619
• /
• 1997

Optimal Mullite sol was synthesized by sol-gel process using Aluminium sec-butoxide(ASB), Tetraethoxysilane(TEOS) and then, Mullite films were dip-coated with various holding time in sol bath and heat-treated at 130$0^{\circ}C$ above for crystallization. The thickness of coated film increased linearly with holding time in sol bath and average pore size was controllable within 20~30$\AA$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1466-1468
• /
• 2009

The preparation method of copper nanopowder by dry process for conductive ink was investigated. Inert gas condensation method was used to synthesize copper nanopowder. The produced powders was spherical and sized 10~100nm flowing the conditions. The results showed that input voltage and evaporation rate is critical variables for nano-sized copper powder.