• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.88-93
• /
• 2008

Weld overlay is one of the residual stress mitigation method which arrest crack. An overlay weld sued in this manner is termed a preemptive weld overlay(PWOL). PWOL was good for distribution of residual stress of dissimilar metal weld(DMW) by previous research. Because range of overlay welding is wide relatively, residual stress distribution on PWR is affected by welding sequence. In order to examine the effect of welding sequence, PWOL was applied to a specific DMW of KORI nuclear power plant by finite element analysis method. As a result, the welding direction that from nozzle to pipe is better good for residual stress distribution on PWR.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.873-881
• /
• 2008

Weld overlay is one of the residual stress mitigation methods which arrest crack initiation and crack growth. Therefore weld overlay can be applied to the region where cracking is likely to be. An overlay weld used in this manner is termed a preemptive weld overlay(PWOL). In pressurized water reactor(PWR) dissimilar metal weld is susceptible region for primary water stress corrosion cracking(PWSCC). In order to examine the effect of PWOL on residual stress mitigation, PWOL was applied to a specific dissimilar metal weld of Kori nuclear power plant by finite element analysis method. As a result, strong compressive residual stress was made in PWSCC susceptible region and PWOL was proved effective preemptive repair method for weldment.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.94-97
• /
• 2008

In the welding process, weldments usually include repair weld during the manufacturing process. Repair welds is supposed to cause strong tensile residual stress. Moreover weldments, usually made by Alloy 82/182, is susceptible to PWSCC. Therefore, mitigation of welding residual stress in weldments is important for reliable operating. PWOL is one of the methods for mitigation and verified for over twenty years. In this paper, residual stress distribution of repaired weldments and the effect of PWOL on mitigation is examined for surge nozzle.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.557-564
• /
• 2009

Welding residual stress is occurred after welding process. Tensile residual stress is one factor of PWSCC. Repair welding usually happened during the manufacturing welding process. Repair welds cause strong tensile residual stress. In PWR, Repair weldments made by Alloy 82/182 is susceptible to PWSCC caused by tensile stress, material and environment. Therefore, mitigation of welding residual stress in weldments is important for reliable operating. PWOL is one of the methods for mitigation and verified for over twenty years. In this paper, residual stress distribution of repaired weldments and the effect of PWOL on mitigation is examined for surge nozzle.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.16-16
• /
• 2009

Alloy 82/182로 용접된 원자력 발전소 주기기의 이종 금속 용접부는 장기간 운전 후 응력부식균열(SCC : Stress Corrosion Cracking)에 의한 결함이 나타나게 된다. 2000년대 이후로 원자력 주기기 Alloy 82/182 용접부에서 PWSCC(Primary Water Stress Corrosion Cracking)에 의한 Degradation이 급격히 증가하는 추세를 보이고 있으며, 국내에서도 이와 관련하여 원자력 발전소의 안전성에 대한 Issue 및 대비책에 대한 관심이 고조되고 있다. 이러한 Alloy 600 용접부에 대한 결함을 예방하기 위한 대표적인 기술로써 수명연장 오버레이 기술이 있다. 원자력 주기기 노즐부는 저탄소강으로 제작되어 있으며, 저탄소강에는 제작 시 용접후열처리가 적용된다. 후열처리를 하는 주된 이유는 Tempering을 통해 열영향부의 인성 및 연성의 회복과 강도를 감소시켜 모재와 동등 또는 이 이상의 물성을 갖도록 하는 데 그 목적이 있다. 그러나 수명연장 오버레이의 경우 현장 작업 시에 후열처리가 어렵기 때문에, 이를 대체하기 위한 기술로 템퍼비드 용접을 적용할 경우 후열처리를 면제해 주고 있다. 본 연구에서는 수명연장 오버레이 기술 개발의 일환으로써 저 탄소강에 대한 템퍼비드 용접 기술을 확립하였다. 실험에 사용된 모재는 원자력 주기기의 노즐에 사용되는 SA508 Gr.3 Cl.1을 사용하였으며, 용가재는 Alloy 52 및 52M을 사용하였다. 최적 조건 도출을 위해서 실험 매트릭스를 이용하여 기본 실험을 수행하였으며, 실험에는 자동 GTAW 용접을 적용하였다. 기본 실험을 통해 얻은 최적 조건을 사용하여 PQ 시험을 수행하여 WPS를 확보하였다. 분석은 용접 후 조직 및 경도 시험, 물리시험(인장시험, 굽힘시험 및 충격시험)을 수행하였다.