• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1813-1820
• /
• 2016

Dual-mode photovoltaic power system should be capable of operating in grid-connected (GC) and stand-alone (SA) modes for distributed generation. Under different working modes, the optimal parameters of inverter output filters vary. Inverters commonly operate in GC mode, and thus, a small capacitance is beneficial to the GC topology for achieving a reasonable compromise. A predictive current control scheme is proposed to control the grid current in GC mode and thereby obtain high-performance power. As filter are not optimal under SA mode, a compound control strategy consisting of predictive current control, instantaneous voltage control, and repetitive control is proposed to achieve low total harmonic distortion and improve the output voltage spectrum. The seamless transfer between GC mode and SA mode is illustrated in detail. Finally, the simulation and experimental results of a 4 kVA prototype demonstrate the effectiveness of the proposed control strategy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.231-232
• /
• 2007

In this paper, a fault diagnosis and control integrated system (FDCIS) was developed to control the thermoelectric (TE) power in the SP-100 space reactor. The objectives of the proposed model predictive control were to minimize both the difference between the predicted TE power and the desired power, and the variation of control drum angle that adjusts the control reactivity. Also, the objectives were subject to maximum and minimum control drum angle and maximum drum angle variation speed. A genetic algorithm was used to optimize the model predictive controller. The model predictive controller was integrated with a fault detection and diagnostics algorithm so that the controller can work properly even under input and output measurement faults. With the presence of faults, the control law was reconfigured using online estimates of the measurements. Simulation results of the proposed controller showed that the TE generator power level controlled by the proposed controller could track the target power level effectively even under measurement faults, satisfying all control constraints.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.746-750
• /
• 2001

During the last decades several proposals have been made in literature to use predictive control for inverter control-especially in electrical drives. These algorithms are completely different to the recursive but linear predictive algorithms known from information theory, where closed mathematical equations are used (e.g. Kalman-filters). Only few of the presented schemes have been realized in industrial applications so far. After some further progress, however, the advantage of predictive algorithms might lead to an increased number of industrial implementations in the future. Besides the common basic idea - to use the well-known but strongly non-linear behaviour of inverters to precalculate the best switching times - there are many differences in the details of these proposals. This contribution shows similarities and differences and attempts to design a 'family tree' of predictive control algorithms. This might grow to a first step to a theoretical approach to deal with predictive control schemes in a more generalised way.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.751-758
• /
• 2011

This paper presents an effective robust predictive control scheme for the active power filter (APF) using a smith-predictor based current regulator, which show superior features when compared to proportional-integral (PI) controllers in terms of an enhanced closed-loop bandwidth and an improved current tracking accuracy. A moving average filter (MAF) is implemented using a field programmable gate array (FPGA) for signal pre-processing to eliminate the switching ripple contamination. An adaptive linear neural network (ADALINE) is used for individual harmonic estimation to achieve selective compensation purpose. The effectiveness and validity of the devised control algorithm are confirmed by extensive simulation and experimental results.

• 국제지역연구
• /
• 제14권1호
• /
• pp.99-119
• /
• 2010

본 연구는 미국의 천연가스시장과 석유시장, 그리고 유럽의 석유시장을 대상으로 두가지 분석에 주안점을 두었다. 하나는 그랜저 인과관계(Granger-causality) 검증을 통하여 수익률과 변동성 부문에 있어 이질적 상품시장간 또는 동일상품시장내 현/선물간 예측력(predictive power) 여부 확인이며, 다른 하나는 회귀분석을 통한 선물가격의 현물가격 안정화 효과이다. 상품시장간 예측력에서 수익률 부문은 현물수익률과 선물수익률이 서로 상반된 양상을 보였지만 전체적으로 통계적 유의성이 낮게 나타났다. 변동성 부문에서는 석유시장이 천연가스시장에 가지는 예측력과는 달리 천연가스시장은 석유시장에 별다른 영향을 주지 못하는 것을 확인 할 수 있었다. 동일상품시장내 예측력 분석의 수익률 부문에서는 유일하게 유럽 석유시장의 현물수익률이 선물수익률에 예측정보를 가짐을 알 수 있었다. 변동성 부문은 모든 상품시장에서 현물과 선물간 인과관계가 양방향으로 성립함을 확인하였다. 선물가격의 현물가격 안정화 효과 분석 결과, 선물변동성은 현물변동성을 증가시키는 것으로 나타났다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1791-1804
• /
• 2018

To achieve a fast dynamic response and to solve the multi-objective control problems of the output currents, capacitor voltages and system constraints, this paper proposes a deadbeat and hierarchical predictive control with space-vector modulation (DB-HPC-SVM) for five-level nested neutral point piloted (NNPP) converters. First, deadbeat control (DBC) is adopted to track the reference currents by calculating the deadbeat reference voltage vector (DB-RVV). After that, all of the candidate switching sequences that synthesize the DB-RVV are obtained by using the fast SVM principle. Furthermore, according to the redundancies of the switch combination and switching sequence, a hierarchical model predictive control (MPC) is presented to select the optimal switch combination (OSC) and optimal switching sequence (OSS). The proposed DB-HPC-SVM maintains the advantages of DBC and SVM, such as fast dynamic response, zero steady-state error and fixed switching frequency, and combines the characteristics of MPC, such as multi-objective control and simple inclusion of constraints. Finally, comparative simulation and experimental results of a five-level NNPP converter verify the correctness of the proposed DB-HPC-SVM.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.445-455
• /
• 2018

A novel algorithm is proposed to regulate the neutral point potential in neutral point clamped three-level inverters. Oscillations of the neutral point potential and an unbalanced dc-link voltage cause distortions of the output voltage. Large capacitors, which make the application costly and bulky, are needed to eliminate oscillations. Thus, the algorithm proposed in this paper utilizes the finite-control-set model predictive control and the multistage medium vector to solve these issues. The proposed strategy consists of a two-step prediction and a cost function to evaluate the selected multistage medium vector. Unlike the virtual vector method, the multistage medium vector is a mixture of the virtual vector and the original vector. In addition, its amplitude is variable. The neutral point current generated by it can be used to adjust the neutral point potential. When compared with the virtual vector method, the multistage medium vector contributes to decreasing the regulation time when the modulation index is high. The vectors are rearranged to cope with the variable switching frequency of the model predictive control. Simulation and experimental results verify the validity of the proposed strategy.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.199-203
• /
• 2016

An enzyme-free optical method is proposed for estimating high concentrations of glucose in a glucose-lactose mixture, based on a predictive equation that takes advantage of the reflective optical power observed at two discrete wavelengths. Compared to the conventional absorption spectroscopy method based on Beer's Law, which is mainly valid for concentrations below hundreds of mg/dL, the proposed scheme, which relies on reflection signals, can be applied to measure higher glucose concentrations, of even several g/dL in a glucose-lactose mixture. Two probe wavelengths of 1160 and 1300 nm were selected to provide a linear relationship between the reflective power and pure glucose/lactose concentration, where the relevant linear coefficients were derived to complete the predictive equation. Glucose concentrations from 2 to 7 g/dL in a glucose-lactose mixture were efficiently estimated, using the established predictive equation based on monitored reflective powers. The standard error of prediction was 1.17 g/dL.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.336-340
• /
• 2001

In a digital system, there are inevitable delays in calculations and applying the inverter output voltages to the motor terminals. Because of the delays, the conventional predictive current controller implemented in the digital system has large overshoot and large harmonics. A new predictive current controller, considering the delays, for a permanent magnet synchronous motor (PMSM) is presented. The effectiveness and feasibilities are shown by experimental results.