• 터널과지하공간
• /
• 제2권2호
• /
• pp.212-223
• /
• 1992

The distinct element method(DEM) si well suited to the kinematic analysis of blocky rock masses. Two distinctive problems, a rock avalache and tunnel in jointed rock masses, are chosen to apply the DEM which is based on perfectly rigid behaviour of blocks. Investigated for both problems are the effects of the input parameters such as contact stiffnesses, friction coefficient and damping property. Using various types of models of the avalanche and tunne, an extensive parametric study is done to gain experiences in the method, and then to alleviate difficulties in determining parameter values suitable for a given problem. The coefficient of frictio has significant effects on all aspects of avalanche motion(travel distance, velocity and travel time), while the stiffnesses affect the rebounding and jumping motions after collision. The motion predicted by the models having single and mutiple blocks agrees well to the observations reported on the actual avalache. For the tunnel problem, the behaviour of the key block in an example tunnel is compared by testing values of the input parameters. The stability of the tunnel is dependent primarily on the friction coefficient, while the stiffness and damping properties influence the block velocity. The kinematic stability of a tunnel for underground unclear waste repository is analyzed using the joint geometry data(orientation, spacing and persistence) occurred in a tailrace tunnel. Allowing a small deviation to the mean orientation results in different modes of failure of the rock blocks around the tunnel. Of all parameters tested, the most important to the stability of the tunnel in blocky rock masses are the geometry of the blocks generated by mapping the joint and tunnel surfaces in 3-dimensions and also the friction coefficient of the joints particularly for the stability of the side walls.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.615-622
• /
• 2003

본 논문에서는 그라우트 충전식 철근이음의 보다 합리적이고 타당한 부착강도를 평가하는 방법을 제시하고자 한다. 이 목적을 위하여 실물크기의 60개 모르타르 충전식 철근이음 실험체를 제작한 후에 단조가력을 실시하였다. 본 연구의 실험변수는 충전 모르타르 압축강도, 철근의 정착길이, 철근의 규격 등으로 정하였다. 본 연구의 결과, 본 실험에서 부착파괴가 발생한 실험체를 대상으로 기존의 모르타르 충전식 철근이음의 부착강도 평가방법의 적합성을 검토하면 기존의 방법은 본 실험의 철근이음 부착강도를 약 8∼18% 정도 과소평가하고 있고 철근의 정착길이가 감소함에 따라서 이러한 경향은 커졌다. 또한 최종적으로 부착파괴된 실험결과로부터 철근의 정착길이와 충전 모르타르 압축강도를 종속변수로 다중회귀분석을 실시하여 철근이음의 구속력을 제안하였다. 횡방향 구속효과를 고려한 Untrauer와 Henry의 부착강도식에 구속력 산정 제안식을 적용하면 다른 기존의 부착강도 평가방법과 비교하여 정확하게 실험값을 예측할 수 있음은 물론 철근의 정착길이에 따른 편차도 제거할 수 있었다.

• Child Health Nursing Research
• /
• 제4권2호
• /
• pp.221-230
• /
• 1998

This study was designed to identity the degree of burden felt by mothers of children with nephrotic syndrome. Also, relations between the subject characteristics and burden were investigated to provide basis data for their family health and nursing intervention. The study subjects were composed of 70 mothers of nephrotic syndrome patients whose children were hospitalized in 2 Pediatric wards of University Hospital in Seoul and 1 in Pusan from Mar. 2nd, 1998 to May. 30th in the same year The questionnaires were used which dealt with burden of mothers. the questionnaires for this study designed and used by researcher placed their basis in Burden Measurement Instrument developed by Montgomery et. al (1985) and the reliability of the used instrument was .78. The data analysis was done by SPSS, t-test, ANOVA and Stepwise Multiple Regression. The results of were as follows. 1. Mean score of burden of subjects was 60.82(Maximum 86, standard deviation 1.244). 2. Of the mothers characteristics, the score of burden was high in case of no religion and low income. 3. Of the patients characteristics, the score of burden ranked as high in MCNS, doing oral therapy and injection therapy at the same time, and negative perceived patients' condition. 4. The degree of burden felt by mothers of children with nephrotic syndrome was significantly predicted by the level of pt's diagnosis(11%), pt's condition(8%), economic state (6%) and pt's sex (5%), respectively. In conclusion to above study, the researcher suggests that the development of instrument for measurement of burden is in much need. Relations between burden and social support should be studied to lessen burden of mothers of children with nephrotic syndrome.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.105-112
• /
• 2011

본 연구의 목적은 나선형 원형핀-튜브 증발기의 열전달 성능에 관하여 해석적으로 연구하는 것이다. 이를 위하여 두 가지 냉매인 R134a 와 R600a 에 대하여 냉매의 질량유량, 공기온도, 공기풍량 및 튜브직경 변화에 대하여 나선형 원형핀-튜브 증발기의 열전달 성능변화를 고찰하였다. 본 연구에서 개발된 증발기 성능해석 프로그램은 실험결과와 평균 8.3% 오차 범위 안에서 잘 예측되었다. 결과적으로, 동일한 냉매유량 범위에서 R600a 를 사용하는 경우가 R134a 를 사용하는 경우보다 더 우수한 열전달율을 나타내었다. 열전달량은 풍량 및 공기온도가 증가할수록 증가하였으나 열전달량은 튜브두께가 증가할수록 감소하였다.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.42-53
• /
• 2004

An experimental study on the refrigerant-side pressure drop of slit fin-tube heat exchanger has been carried out. A comparison was made between the predictions of previously proposed empirical correlations and experimental data for the pressure drop on design conditions of condenser in micro-fin tube for R22 and its alternatives, R407C (R32/125/134a, 23/25/52 wt.％) and R410A (R32/125, 50/50 wt.％). Experiments were carried out under the conditions of inlet refrigerant temperature of 6$0^{\circ}C$ and mass fluxes varying from 150 to 250 kg/$m^2$s for R22, R407C and R410A. The inlet air conditions are dry bulb temperature of 35$^{\circ}C$, relative humidity of 40% and air velocity varying from 0.68 to 1.43 m/s. Experiments show that pressure drop for R410A and R407C were 17.8∼20.2％ and 5∼6.8％ lower than those of R22 respectively for the degree of subcooling of 5$^{\circ}C$. For the mass fluxes of 200∼250 kg/$m^2$s, the deviation between the experimental and predicted values for the pressure drop was less than $\pm$20％ for R22, R407C and R410A.

• 대한통합의학회지
• /
• 제4권1호
• /
• pp.65-72
• /
• 2016

Purpose : This study was carried out to find out the relationship between emotion intelligence, learning flow and career stress of nursing students and influence factors for career stress. Methods : This study targeted 197 university students in their freshman-senior year attending College of Nursing located in P Metropolitan City. For collected data, real numbers and percentage, mean and standard deviation and multiple regression analysis were carried out by using PASW 21.0 program and the correlation between emotion intelligence, learning flow and career stress was analyzed with Pearson's correlation coefficients. Results : Emotional self-awareness(M=3.80, SD =.71), clear goals(M=3.39, SD=.90) and school environment stress(M=2.97, SD=.96) were found to be high in the degree of emotion intelligence, learning flow and career stress of the subjects. The relationship between emotion intelligence and learning flow showed a positive correlation(r=.489, p<.01) in the correlation between emotion intelligence, learning flow, career stress and emotion intelligence showed a negative correlation with career stress(r=-.204, p<.01). Emotion intelligence and learning flow show that career stress is predicted significantly (${\beta}$ =-.15, p < .01) and explained a career stress variate as 18%(F = 24.5, p < .01). Conclusion : Emotion intelligence of nursing students was found to be very influential on the degree of learning flow or career stress. Based on the results of this study, replication studies on emotion intelligence and career stress are needed and the development of intervention programs to increase emotion intelligence is needed.

• 천문학회보
• /
• 제35권2호
• /
• pp.51.2-51.2
• /
• 2010

We have investigated 63 intense geomagnetic storms (Dst $\leq$ -100 nT) that occurred from 1998 to 2006. Using these events, we compared Dst forecast models: Burton et al. (1975), Fenrich and Luhmann (1998), O'Brien and McPherron (2000a), Wang et al. (2003), and Temerin and Li (2002, 2006) models. For comparison, we examined a linear correlation coefficient, RMS error, the difference of Dst minimum value (${\Delta}$peak), and the difference of Dst minimum time (${\Delta}$peak_time) between the observed and the predicted during geomagnetic storm period. As a result, we found that Temerin and Li model is mostly much better than other models. The model produces a linear correlation coefficient of 0.94, a RMS (Root Mean Square) error of 14.89 nT, a MAD (Mean Absolute Deviation) of ${\Delta}$peak of 12.54 nT, and a MAD of ${\Delta}$peak_time of 1.44 hour. Also, we classified storm events as five groups according to their interplanetary origin structures: 17 sMC events (IP shock and MC), 18 SH events (sheath field), 10 SH+MC events (Sheath field and MC), 8 CIR events, and 10 nonMC events (non-MC type ICME). We found that Temerin and Li model is also best for all structures. The RMS error and MAD of ${\Delta}$peak of their model depend on their associated interplanetary structures like; 19.1 nT and 16.7 nT for sMC, 12.5 nT and 7.8 nT for SH, 17.6 nT and 15.8 nT for SH+MC, 11.8 nT and 8.6 nT for CIR, and 11.9 nT and 10.5 nT for nonMC. One interesting thing is that MC-associated storms produce larger errors than the other-associated ones. Especially, the values of RMS error and MAD of ${\Delta}$peak of SH structure of Temerin and Li model are very lower than those of other models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.83-89
• /
• 2000

This paper presents a pressure drop correlation for evaporation and condensation of alternative refrigerant with oil in micro-fin tubes. The correlation was developed from a data base consisting of oil-free pure and mixed refrigerants in micro-fin tube; Rl25 R134a. R32 R410a(R32/R125 50/50% mass), R22, R407c(R32/R125/R134a, 23/25/52% mass) and R32/R134a(25/75% mass). The micro-fin tube used in this paper had 60 0.2mm high fins with a 18 helix angle. The cross sectional flow area $(A_c)$ was $60.8 mm^2$ giving an equivalent smooth diameter$(D_e)$ of 8.8mm. The hydraulic diameter $(D_h)$ was estimated to the 5.45mm. The new correlation was obtained by replacing the friction factor and the tube-diameter in Bo Pierre correlation by a friction factor derived from pressure drop data for a micro-fin tube and the hydraulic diameter, respectively. This correlation was also used to predict some pressure data with a lubricant after using a mixing viscosity rule of lubricants and refrigerants. As a result, the new correlation was also well predicted to the measured data within a mean deviation of 19.0%.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.505-511
• /
• 2014

내연기관의 냉각기 고무호스에 사용되는 EPDM 고무는 열과 기계적 하중을 받는 동시에 국부적으로 형성된 전기적 스트레스를 받아 복합적인 노화가 발생한다. 본 연구에서는 EPDM 고무의 전기화학적 복합노화 시험을 하고, 아레니우스 관계식을 이용하여 노화온도($60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$)에 따른 가속수명 예측식을 구하였다. 수명에 영향을 미치는 인장변형률(5%, 10%)을 반영하여 예측식의 기울기($E_a/R$) 및 아레니우스 상수(C)를 고려한 수정된 수명예측 식을 제안하였다. 이를 통해 노화온도와 인장변형률에 영향을 받은 EPDM 고무의 수명을 예측하였고, 수정된 수명예측 시간이 실제 실험결과의 편차 범위 이내에서 일치함을 확인하였다.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.41-48
• /
• 1992

Various soil behaviors usually occurring in the geotechnical problems, such as, cutting and embankments, stability of slope, seepage, consolidations, shearing failures and liquefaction, should be predicted and analyzed in any way. An approach of these predictions may be followed by the development of the constitutive equations as first and subsequently solved by numerical methods. The purpose of this paper is develop the constitutive equation of sands uder monotonic or cyclic loadings. The constitutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parameter by Sekiguchi et al and Pender's theory is derived. And the equation is included a new stress parameter, hardening function, Bauschinger's effects and Pender's theory. The model is later evaluated and confirmed the validity by the test data of Ottawa sand, Banwol sand Hongseong sand. The following conclustions may be drawn: 1. The consititutive equation which is based on elasto-plastic theory, modified anisotropic consolidated stress parpameter by Sekiguchi et al and Pender's theory is derived. The equation in included a new stress parameter, hardening function, Bauschinger's effect and Pender's theory. 2. For Ottawa sand, the result of the constitutive equation shows a better agreement than that of Oka et al. The result of axial strain agrees well with the tested data. However, the result of horizontal strain is little bit off for the cyclic loadings or large stress. It is thought that the deviation may be improved by considering Poisson's ratio and precise measurement of shear modulus. 3. Banwol sand is used for the strain and stress tests with different relative densitites and confining pressures. The predeicted result shows a good agreement with the tested data because the required material parameters were directly measurd and determined form this laboratory. 4. For Hongseong sand, the tests under same amplitude of cyclic deviatoric stress shows a similar result with the tested data in absolute strain. It shows the acute shape of turning point because the sine wave of input is used in the test but the serrated wave in prediction.