• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.17-27
• /
• 2009

압축성 영역에서 개발된 2상 유동 RoeM과 AUSMPW+를 전 마하수 영역 해석을 위해 예조건화 하였다. 압축성 영역에서 개발된 풍상차분 수치기법들은 수치점성에서 음속을 포함하는 항들을 갖고 있는데, 이는 비압축성 영역에서 관련 수치점성 크기를 지나치게 크거나 작게 만들어 해의 정확도를 떨어뜨리거나 수치 불안정 현상을 일으킨다. 따라서 예조건화된 시스템 고유값을 수치점성에 고려하여 전 마하수 영역에서 해의 정확성을 확보하였고, 점근 분석을 통해 개발된 수치기법이 비압축 극한 영역에서 보존형 지배방정식과 일관됨을 확인하였다. 수치 예제들을 통해 예조건화된 2상 유동 RoeM과 AUSMPW+가전 마하수 영역에서 합리적인 해를 도출함을 알 수 있었다.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.974-981
• /
• 2017

전 세계적으로 무선국의 급격한 확대로 인해 해외에서는 사전조정제도로서 주파수 코디네이터 제도를 운영하고 있다. 이에 따라 국내에도 향후에는 5G, 면허 및 비면허 기반의 소출력 장거리 IoT 기기 등 많은 종류의 무선국 확대가 예상되고, 특히 융합상품으로 출시되는 드론, 전파자원의 불요발사, 주파수공동사용 등 자원의 문제가 야기되고 있어 상기제도 또는 다른 방안의 제도 도입을 검토할 필요가 있다. 본 논문에서는 무선국 인 허가제도의 개요와 타 산업 인 허가에 대해 조사한 내용을 소개하고 무선국 인 허가와 타 산업을 위주로 총 19가지의 절차 법령을 조사하였으며 인 허가 절차에 대한 도표를 도시화하고, 유사한 타 산업 인 허가에 대한 비교항목 선정과 공통점 및 특이점을 분석하여 실선 그래프 방식을 이용하여 개별제도 상호 간의 차이점을 비교분석하였다. 또한 이를 통해 향후에 드론과 같은 융합상품에 발생될 우려가 있는 문제점에 대해 논의하고 시사점을 고찰하였다.

• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.761-771
• /
• 1998

In this study, attempt has been made to evaluate the effect of $CO_2$ laser irradiation on enamel surface structure and the bond strength of sealant material. Conventional acid etching was used as a control technic for comparison. The results obtained from this experiment were as follows; 1. The highest mean shear bond strength value was observed in samples of Group I (acid-etching) with the statistical significance(p<.05) between all the other groups. 2. The shear bond strength in Group IV was the lowest among laser etching groups. but there were no significant difference between them(p>.05). 3. Scanning electron microscopic observation showed that the rough and irregular surface was created by $CO_2$ laser treatment with the formation of numerous pores, micro-cracks, and small bubble-like inclusion. Increasing the energy density induced localized surface melt with a thin smooth glaze-like appearance. 4. In acid-etched control specimen cohesive failure predominated, whereas adhesive failure was the main mode in laser-treated group. Based upon the above-mentioned results, it can be assumed that the $CO_2$ laser is not an adequate substitute for the acid-etch technique in enamel preconditioning. More studies are required to explore the effective condition of laser irradiation which could attain the better bond strength of restorative materials.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권4호
• /
• pp.1-15
• /
• 2017

Purpose Through the provision of real time performance information about who is contributing and who is not in Electronic Brainstorming, prior studies evidenced a significant performance gain. However, it has been observed that the quantity-based performance feedback alone does not have enough restrictiveness to guide the performance behavior throughout the idea generation session. We included the notion of goal setting into the process performance feedback mechanism in an effort to regulate performance behavior and to better understand why individuals in Electronic Brainstorming are not obtaining enough stimulation benefits in the group interaction process. Design/methodology/approach We had developed real-time visual process performance feedback and modified to include goal setting. This mechanism visually displays individuals' performances two-dimensionally (quality for each idea vertically and quantity of ideas horizontally along with their goals). As individuals' contributions accumulate, the mechanism reveals performance histories by connecting the sequence of ideas in a time-series format, telling stories of individuals' performances. Then, we compared the performance outcome from this study with the outcomes from two prior studies (i.e., Jung et al., 2010 and Jung, 2014). Findings The results showed that the inclusion of goal setting into the process performance feedback solved the issue in the previous study. That was the lower than expected magnitude of performance enhancement of process performance feedback when compared to that of quantity-based feedback. It appears that goals as a motivational technique provide standards for systematic self-evaluation, serving as a cue to regulate performance behavior by strengthening the linkage between effort and performance. Thus, goals seem to set up a self-fulfilling prophecy, preconditioning better performance. However, the outcome still showed that its performance magnitude is unsatisfactory because the outcome of this study turned out to be close to the outcome of just quantity-based performance feedback in Jung et al.'s (2010) study.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.868-869
• /
• 2005

• Archives of Plastic Surgery
• /
• 제44권5호
• /
• pp.384-389
• /
• 2017

Background The aim of this study was to investigate the effects of remote ischemic conditioning on ischemia-reperfusion injury in rat muscle flaps histopathologically and biochemically. Methods Thirty albino rats were divided into 5 groups. No procedure was performed in the rats in group 1, and only blood samples were taken. A gracilis muscle flap was elevated in all the other groups. Microclamps were applied to the vascular pedicle for 4 hours in order to achieve tissue ischemia. In group 2, no additional procedure was performed. In groups 3, 4, and 5, the right hind limb was used and 3 cycles of ischemia-reperfusion for 5 minutes each (total, 30 minutes) was applied with a latex tourniquet (remote ischemic conditioning). In group 3, this procedure was performed before flap elevation (remote ischemic preconditoning). In group 4, the procedure was performed 4 hours after flap ischemia (remote ischemic postconditioning). In group 5, the procedure was performed after the flap was elevated, during the muscle flap ischemia episode (remote ischemic perconditioning). Results The histopathological damage score in all remote conditioning ischemia groups was lower than in the ischemic-reperfusion group. The lowest histopathological damage score was observed in group 5 (remote ischemic perconditioning). Conclusions The nitric oxide levels were higher in the blood samples obtained from the remote ischemic perconditioning group. This study showed the effectiveness of remote ischemic conditioning procedures and compared their usefulness for preventing ischemiareperfusion injury in muscle flaps.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권10호
• /
• pp.4329-4333
• /
• 2015

Background: To investigate the change of frequency and immuno-inhibitory function of myeloid-derived suppressor cells (MDSCs) after treatment of cisplatin (DDP) in A375 human melanoma model. Materials and Methods: BALB/c nude mice were inoculated with A375 cells to establish the human melanoma model and randomly divided into control group given normal saline (NS) and experimental group treated with DDP (5 mg/kg). The percentages of MDSCs in the tumor tissue and peripheral blood after DDP treatment were detected by flow cytometry. The proliferation and interferon-${\gamma}$ (IFN-${\gamma}$) secretion of T cells co-cultured with MDSCs were analyzed through carboxyfluorescein succinimidyl ester (CFSE) labeling assay and enzyme-linked immunospot (ELISPOT) assay, respectively. Results: In A375 human melanoma model, DDP treatment could significantly decrease the percentage of MDSCs in the tumor tissue, but exerted no effect on the level of MDSCs in peripheral blood. Moreover, DDP treatment could attenuate the immuno-inhibitory function of MDSCs. T cells co-cultured with DDP-treated MDSCs could dramatically elevate the proliferation and production of INF-${\gamma}$. Conclusions: DDP can decrease the frequency and attenuate immuno-inhibitory function of MDSCs in A375 melanoma model, suggesting a potential strategy to augment the efficacy of combined immunotherapy.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.38-47
• /
• 2005

Substructuring methods are often used in finite element structural analyses. In this study a multi-level substructuring(MLSS) algorithm is developed and proposed as a possible candidate for finite element fluid solvers. The present algorithm consists of four stages such as a gathering, a condensing, a solving and a scattering stage. At each level, a predetermined number of elements are gathered and condensed to form an element of higher level. At the highest level, each sub-domain consists of only one super-element. Thus, the inversion process of a stiffness matrix associated with internal degrees of freedom of each sub-domain has been replaced by a sequential static condensation of gathered element matrices. The global algebraic system arising from the assembly of each sub-domain matrices is solved using a well-known iterative solver such as the conjugare gradient(CG) or the conjugate gradient squared(CGS) method. A time comparison with CG has been performed on a 2-D Poisson problem. With one domain the computing time by MLSS is comparable with that by CG up to about 260,000 d.o.f. For 263,169 d.o.f using 8 x 8 sub-domains, the time by MLSS is reduced to a value less than $30\%$ of that by CG. The lid-driven cavity problem has been solved for Re = 3200 using the element interpolation degree(Deg.) up to cubic. in this case, preconditioning techniques usually accompanied by iterative solvers are not needed. Finite element formulation for the incompressible flow has been stabilized by a modified residual procedure proposed by Ilinca et al.[9].

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.727-732
• /
• 2013

본 연구는 역오팔 지지체를 이용하여 인간지방유래 줄기세포의 연골 분화를 촉진하는 내용을 담고 있다. 비 다공성 구조를 가진 지지체에서 세포를 분화 시도하였을 경우 분화가 잘 촉진되지 않는 것에 비해 200 nm 정도의 균일한 구멍을 가지는 poly(D,L-lactide-co-glycolide)로 구성된 역오팔 지지체는 그 다공성 구조로 인하여 지지체의 내부까지 산소와 유기물의 수송을 가능하게 하여 지지체 내에서 어떤 유전적, 약물적 처리 없이 인간지방유래 줄기세포가 분화가 잘 되게 하는 것을 확인하였다.

• 대한통합의학회지
• /
• 제4권4호
• /
• pp.109-117
• /
• 2016

Purpose : This study was designed to provide basic data of effective sanitization method of sprout vegetable for microbiological safety. Methods : Sanitization treatments were performed by dipping the sprout into chlorine and vinegar water. Microbial analysis were composed of the total plate count(TPC) and coliform group count(CGC). Result : Among chlorine water sanitization, the microbial reduction was largest in 100ppm chlorine water, and its TPC and coliform group count decreased to 6.01 log CFU/g and 5.06 log CFU/g. The effective dipping time in 100ppm chlorine water treatment was 5.97 log CFU/g and 5.91 log CFU/g for 30min and 60min, in which TPC were below the microbiological safety limits of 6.00 log CFU/g. Coliform group counts were decreased to 5.44, 5.46, 5.42 log CFU/g in the dipping the spouts for 30min, 60min and 90min. As a result of sanitizing alfalfa spout by vinegar water, a microbial counts tended to decrease with increasing concentration and the dipping time. The effective concentration of vinegar water was 2% for TPC(6.00 log CFU/g) and 1% for coliform group count(5.20 log CFU/g). With 1% vinegar water treatment, TPC became below the microbiological safety limits in all samples and in particular, the sample treated for 60min and 90min(4.93, 4.54 log CFU/g). While coliform group counts were decreased to 3.91 log CFU/g in the dipping the sprouts for 90min, those were still beyond the permitted limit. Conclusion : To secure the food safety of food service facilities including kindergarten feeding, it is considered that along with the systematic study of effective disinfection method for microbiological control at the preconditioning level of spout vegetable within the range of secured maleficence to human body, and the study regarding the measures to lower the initial microbiological pollution of spout vegetable.