• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.557-564
• /
• 2009

The objective of this study is to efficiently recover phosphorus contained in sewage sludge by a struvite-forming method. The performances were evaluated under various operating conditions(elution with the kind of acid, Mg-compound and temperature) in order to reach the optimum conditions of struvite-forming. As a result, as an elution solution, the elution efficiency of $H_2SO_4$ was 2.65 times higher than that of HCl. Also, the precipitation efficiency of struvite was the highest (97.4%) in case of using $MgCl_2{\cdot}6H_2O$ as Mg-compounds at $25^{\circ}C$. However, the side reaction by Fe, Al and Zn appeared in process of phosphorus recovery. To solve some problems caused by side reacton, large quantities of co-precipitation materials produced by side reaction were removed by precipitating phosphorus compounds in pH 7. Consequently, the recovery efficiency of phosphorus by a struviteforming method was 82.99%, and purity of the recovered struvite product was high.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.409-417
• /
• 2018

This study elicited the necessity of considering regional climate change on Low Impact Development (LID) application by evaluating its effect on LID efficiency. The relationship between climate change factors and LID efficiency was evaluated with Representative Concentration Pathway (RCP) showing the increase of annual precipitation and representative evapotranspiration. Simply lowering lawn surface (LID3), a practical option to increase retention and infiltration effect, demonstrated hydrological improvement above two conventional options, bioretention with green roof (LID1) and bioretention only (LID2). High runoff reductions of applied options at RCP 4.5, supposing taking efforts for mitigating green house gases, revealed that climate change countermeasures were preferable to LID efficiencies. The increase of precipitation had more influence in hydrological change than that of reference evapotranspiration.

• Journal of Climate Change Research
• /
• v.34 no.13
• /
• pp.5243-5256
• /
• 2021

The North Pacific Oscillation (NPO), a primary atmospheric mode over the North Pacific Ocean in boreal winter, is known to trigger El Niño-Southern Oscillation (ENSO) in the following winter, the process of which is recognized as the seasonal footprinting mechanism (SFM). On the basis of the analysis of model simulations from phase 5 of the Coupled Model Intercomparison Project (CMIP5), we found that the SFM acts differently among models, and the correlation between the NPO and subsequent ENSO events, called the SFM efficiency, depends on the background mean state of the model. That is, SFM efficiency becomes stronger as the climatological position of the Pacific intertropical convergence zone (ITCZ) moves poleward, representing an intensification of the northern branch of the ITCZ. When the Pacific ITCZ is located poleward, the wind-evaporation-sea surface temperature (SST) feedback becomes stronger as the precipitation response to the SST anomaly is stronger in higher latitudes than that in lower latitudes. In addition, such active ocean-atmosphere interactions enhance NPO variability, favoring the SFM to operate efficiently and trigger an ENSO event. Consistent with the model results, the observed SFM efficiency increased during the decades in which the northern branch of the climatological ITCZ was intensified, supporting the importance of the tropical mean state of precipitation around the Pacific ITCZ.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.128-134
• /
• 2013

In the summer season (June~August) during the study period of Lake Doam, average concentrations of major water quality parameters, COD, SS, TN, and TP were 4.0, 16.2, 3.129 and $0.077mg\;L^{-1}$, respectively, and Chl-a was $11.8mg\;m^{-3}$. The result has indicated that Lake Doam was a meso-eutrotrophic lake. Lake Doam data from the summer season (June~August), precipitation from 2001 to 2012, and water quality (COD, SS, TN, TP, Chl-a etc.) of seven years (2001, 2002, 2004 and 2009~2012), were statistically analyzed for long-term trends by Mann-Kendall test and Sen's slope estimator methods. The statistical results showed that precipitation, SD, COD, TN, $NO_3-N$, $NH_3-N$ and Chl-a had decreasing trends, and EC, turbidity, SS, TP and DIP had increasing trends. Suspended solids and total phosphorus were directly affected by precipitation. In the case of suspended solids, more aggressive and constructive plans need to be implemented than the current turbidity reduction project to achieve the targeted water quality ($5mg\;L^{-1}$ of SS) in Lake Doam. In particular, we need to specify a project that considers the steep topographic characteristics of high, land farming areas and precipitation conditions of the Lake Doam watershed, which can increase the efficiency of a turbidity reduction project.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1541-1544
• /
• 2002

The concentration of B in steels is important due to its influence on mechanical properties of steel such as hardenability, hot workability, and creep resistance. An analytical method has been developed to determine B in steel samples by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS). National Institute of Standard and Technology Standard Reference Material (NIST SRM) 348a was analyzed to validate the analytical method. The steel sample was digested in a centrifuge bottle with addition of aqua regia and $^{10}B$ spike isotope. Sample pH was then adjusted to higher than 10 to precipitate most matrix elements such as Fe, Cr, and Ni. After centrifugation, the supernatant solution was passed through a cation exchange column to enhance the matrix separation efficiency. B recovery efficiency was about 37%, while matrix removal efficiency was higher than 99.9% for major matrix elements. The isotope dilution method was used for quantification and the determined B concentration was in good agreement with the certified value.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.565-569
• /
• 2003

One-year-long groundwater-level data have been collected from 18 wells in Cheon-an area. The result of barometric efficiency, autocorrelation, cross-correlation and statistical distribution evaluated from the measurement data shows that groundwater-level measurements from observation wells are the principal source of information about aquifer characteristics. Data from WA-2 has high barometric efficiency as well as steady decreasing auto-correlation coefficient, which means nonleaky confined aquifer, Most aquifers in this study show the unconfined properties so that barometric efficiencies are mostly low and the coefficients of cross-correlation between groundwater-level and precipitation are commonly high. This study showed that the long-term groundwater-level monitoring data without artificial stress such as pumping would give accurate information about aquifer characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.584-591
• /
• 2017

Metal removal from water has not been explained clearly by either adsorption onto the surface of absorbents or precipitation as metal hydroxides because those occur simultaneously to a certain extent. For a better understanding of the metal removal mechanisms, batch experiments were performed using soil calcined at $850^{\circ}C$ under various pH conditions for Cu, Pb, Zn, Cd, and Cr. The results showed that the metal removal efficiency with the exception of Cr decreased abruptly, even within 5 min, showing more than 90% removal. The pH of each reactant increased gradually from around 7 to 9 with time. The increases in metal removal at higher pH appear to be associated with metal hydroxides precipitation. Comparative experiments, which were carried out changing the pH by reacting with commercial activated carbon (CAC), natural yellow soil (NYS), and calcined yellow soil (CYS), showed that the pH of the CYS only increased with time. Calcination processes might lead to a change in the physical properties of the soil matrix resulting in a high pH when reacted with water. Apart from adsorption onto the surface of the absorbents, these results show that the adsorption and/or precipitation of hydroxides onto the surface of adsorbents also play important roles in regulating the dissolved metals under alkaline conditions.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.521-527
• /
• 2017

Phosphorus is one of the limiting nutrients for the growth of phytoplankton and algae and is therefore one of leading causes of eutrophication. Most phosphorous in water is present in the form of phosphates. Different technologies have been applied for phosphate removal from wastewater, such as physical, chemical precipitation by using ferric, calcium or aluminum salts, biological, and adsorption. Adsorption is one of efficient method to remove phosphates in wastewater. To find the optimal media for phosphate removal, physical characteristics of media was analysed, and the phosphate removal efficiency of media (silica sand, slag, zeolite, activated carbon) was also investigated in this study. Silica sand showed highest relative density and wear rate, and phosphate removal efficiency. Silica sand removed about 36% of phosphate. To improve the phosphate removal efficiency of silica sand, Fe coating was conducted. Fe coated silica sand showed 3 times higher removal efficiency than non-coated one.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.31-39
• /
• 2005

This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.275-278
• /
• 2002

In this study, to increase removal efficiency of traditional electrokinetic treatment and to reduce contaminant load of wastewater that discharged through cathode compartment, enhanced electrode compartments were investigated. Hydroxide precipitation near the cathode electrode that encounter during traditional electrokinetic treatment were prevented by enhanced electrokinetic remediation test with newly invented electrode compartment. And heavy metal concentration in wastewater showed 0 ppm thus, additive post-treatment cost were not needed.