• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.199-205
• /
• 2009

하프PC 슬래브는 시공중에 슬래브 판에 균열이 발생하기 쉽고 이러한 균열들을 보수보강 하지 않은 상태에서 덧침콘크리트를 타설할 경우 합성슬래브의 내력에 영향을 미칠 것으로 사료된다. 하지만 하프PC 슬래브에 발생한 균열이 합성슬래브의 구조성능에 미치는 영향에 관한 연구는 아직까지 없는 실정이다. 따라서 본 연구에서는 하프PC 슬래브에 발생한 균열이 합성 슬래브의 내력에 미치는 영향을 조사하기 위하여 덧침 콘크리트를 타설하기 전에 하프PC 슬래브에 균열을 발생시킨 시험체와 균열이 없는 합성슬래브 시험체를 제작하여 슬래브의 휨 성능을 검토하였다.

• 콘크리트학회논문집
• /
• 제29권1호
• /
• pp.23-32
• /
• 2017

대심도 복층터널 구조물에서 중간슬래브 구조에 적용되는 형식중 하나인 프리캐스트 구조에서는 차량 진행 방향으로 이음이 발생한다. 따라서, 이 이음부를 일체로 거동하게 하는 것이 중요하다. 이 연구에서 제안하는 대심도 복층터널 중간슬래브는 터널의 공간 활용을 극대화 하기 위하여 프리스트레스를 도입한 보 형식의 구조체로, 'PS 이음방식'과 '볼트체결방식'에 대한 이음방법을 개발하였다. 또한, 두 가지 이음방식을 적용한 중간슬래브의 구조성능을 평가하기 위해서 실물모형 구조실험을 수행하였으며, Contact 모델을 적용한 FEM 해석을 통해서 구조적인 안정성을 검증하였다. 이음방식을 적용한 복층터널 중간슬래브의 정적재하실험 결과 매우 안정적인 거동을 보였으며, 균열 및 처짐에 있어 도로교설계기준(2011)을 만족하여 사용성에도 문제가 없다고 판단되었다. FEM 해석에 따른 중간슬래브의 거동은 실험과 비교하여 강성이 미소하게 크게 나타났으나 전체적인 거동이 거의 유사하게 나타났다. 따라서 이 연구에서 개발한 이음방법을 적용한 중간슬래브를 시공함에 있어 구조적으로 문제가 없을 것으로 판단된다.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.547-557
• /
• 2018

This paper measures the mechanical response of precast pavement joints under moving axle loads using the finite-element method, and the models were validated with results of field tests. In order to increase the ability to use the non-linear FE analysis for design and assessment of precast pavement subjected to moving axle load, this paper investigated the effects of different load transfer between the slabs using the ABAQUS finite-element package to solve the nonlinear explicit model equations. The assembly of the panels using dowels and groove-tongue keys has been studied to assess the efficiency of keyway joint system. Concrete damage plasticity model was used to calculate the effects of permanent damages related to the failure mechanisms. With aggregate interlock as the only load transferring system, Load transfer efficiency (LTE) is not acceptable when the axle load reaches to slab joints. The Finite-element modelling (FEM) results showed that keyway joints significantly reduced tensile stresses developed at the mid-slab. Increasing the thickness of the tongue the LTE was improved but with increasing the height of the tongue the LTE was decreased. Stresses are transferred to the adjacent slab efficiently when dowels are embedded within the model. When the axle load approaches joints, tensile damage occurs sooner than compressive damage, but the damage rate remains constant, then compressive damage increases significantly and become the major form of distress under the dowels.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.98-111
• /
• 2012

본 연구에서는 급속시공을 위한 단지간의 슬래브 형식의 프리캐스트 모듈러교량의 종방향 연결부 상세를 제안하고자 한다. 슬래브 형식의 프리캐스트 모듈러교량은 횡방향으로 분절되어 제작되므로, 분절된 프리캐스트 모듈 사이에는 종방향의 연결부가 형성된다. 이에, 종방향 연결부의 형상과 제원을 결정하기 위해 전단키 개수, 폭, 높이, 경사각, 연결부 폭을 변수로 선정하여 해석적 연구와 실험적 연구를 함께 수행하였다. 결과 분석을 위해서 연결부에 초기 균열이 발생하는 균열하중에 대한 경향을 검토하였으며, 종방향 연결부의 효율성을 평가하기 위해 효율계수(efficiency factor)를 제안하였다. 해석 및 실험에서 얻어진 균열하중과 본 연구에서 제안된 효율계수를 이용하여 연결부의 형상 및 제원을 결정하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1119-1124
• /
• 2004

Full depth precast concrete bridge deck system can be advantageously to reduce construction time, hence lowering the cost. This system has several significant design and construction component. To connect between the concrete slab and steel girder, precast deck has shear pocket. Post-tensioning tightens the joints and prevents any leakage though the joint. When post-tensioning is applied, stress concentration occurs in the edge of shear pocket. In this study, precast decks using four types of shear pocket is analyzed by F.E.M.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.625-633
• /
• 2003

For the construction of open-topped steel box girder bridges, prefabricated concrete slab could offer several advantages over cast-in-situ deck including good quality control, fast construction, and elimination of the formwork for concrete slab casting. However, precast decks without reinforcements at transverse joints between precast slabs should be designed to prevent the initiation of cracking at the joints, because the performance of the joint is especially crucial for the integrity of a structural system. Several prestressing methods are available to introduce proper compression at the joints, such as internal tendons, external tendons and support lowering after shear connection. In this paper, experimental results from a continuous composite bridge model with precast decks are presented. Internal tendons and external tendons were used to prevent cracking at the joints. Judging from the tests, precast decks in negative moment regions have the whole contribution to the flexural stiffness of composite section under service loads if appropriate prestressing is introduced. The validity of the calculation of a cracking load fur serviceability was presented by comparing an observed cracking load and the calculated value. Flexural behavior of the continuous composite beam with external prestressing before and after cracking was discussed by using the deflection and strain data.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.239-248
• /
• 2018

This study developed and investigated a precast slab track system partially reinforced with glass fiber reinforced polymer (GFRP) rebars in the transverse direction, which mitigated the loss of track circuit current by reducing magnetic coupling between the rails and steel reinforcements. An electric analysis was conducted and the results of the analysis verified that the GFRP rebars mitigate the reduced current strength produced by electro-magnetic induction. In the study, a three-dimensional finite element method and flexural experiments were used to study the mechanical behavior of the proposed slab track.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.307-310
• /
• 2005

The PCS system, which consists of precast concrete column and steel beam, has been under development. Experimental test has been carried out to investigate the structural performance of the system under earthquake. Two types of test specimens of beam-column joints are designed in order to compare the performances. One is the system with reinforced concrete slab and the other is without slab. It is found that the system with slab could satisfy all of the requirements from ACI Criteria such as strength, stiffness degradation and energy dissipation capacity except initial stiffness. It is also investigated that the stiffness of the joint is belong to rigid joint type according to Bjorhovde criterion. And it is observed that the partial-composite system between beam and slab is more effective than full-composite system in the respect of the energy dissipation capacity of the system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.791-796
• /
• 2000

Purpose of this study is to analyze the characteristics and reinforcement effects of restored the RC bridge deck with small precast panel through static load tests and to provide the basic information for the damaged slab decks. In the tests for realizing movement of general RC bridge slabs, 6 samples are prepared and tested. All reinforced samples are restored with 1 or 2-layers precast panels by epoxy mortar. The movement of restored slabs is analyzed and compared with the behavior of non-restored slabs. In result of these tests, tension cracks due to bending moment are show, and after static load test there happens finally a punching shear failure, which is the general type of RC bridge failure. The tests show that restoration of the RC slab results in increasing of loading capacity about 30~50% an restoring panels are stick to slab and moving with slab under loading test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.101-102
• /
• 2017

This study was carried out as basic study to apply to construction site the HPC method which is being developed. The construction cost of HPC method was analyzed in comparison with conventional method (half slab method). With regard to research method, it was decided that data on construction work carried out by half slab method was analyzed. According to the results of study, in case of being applied to the construction work using a divided column, the number of columns was decreased. So, it was shown that member production cost, and transport and assemblage cost reduced. In case of being applied to construction work using an undivided column, the analysis showed that there was little difference in construction cost. Therefore, the analysis showed that, if HPC construction method was applied to large structure using a large column, the construction cost was reduced to some extent in comparison with conventional half slab method.