• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.661-664
• /
• 2008

고층 대형 건축물에 사용되는 기둥 보 등의 단면치수가 큰 Precast Concrete 부재는 제조과정에 있어서 외부에서의 가열뿐만 아니라, 시멘트수화열의 축척에 의한 내부에서의 온도 상승도 작용되기 때문에, 단면치수가 비교적 작은 벽, 밑바닥 등의 Precast Concrete 부재와는 다른 온도이력을 나타낸다고 생각할 수 있다. 이에 본 연구는 Precast Concrete적용을 위한 고강도 매스콘크리트 부재의 강도특성을 검토하기에 앞서, 온도이력특성을 밝히는 것을 목적으로 했다. 단면치수가 큰 Precast Concrete 모의부재의 단면치수, 단위시멘트량, 양생조건이 가각 다른 Precast Concrete 부재를 제조할 때의 온도이력특성을 총괄적으로 검토하여 분석하였다.

• KCI Concrete Journal
• /
• 제13권1호
• /
• pp.43-51
• /
• 2001

Although portland cement concrete is one of the most universal construction materials, it has some disadvantage such as shrinkage, which is an inherent characteristic. Because of this shrinkage, combined with the low tensile strength of the material, cracks of varying sizes can be found in every reinforced concrete. To prevent this cracking, keeping the concrete in compression by mechanical prestress has been used. This study discusses application of expansive additives for concrete to improve the serviceability of precast concrete box culvert by inducing chemical prestress. For this purpose, both expansive concrete slabs and normal concrete slabs are tested to verify the effect of expansive additives. Then the failure tests of the fullscale precast box culverts were carried out and the critical aspects of the structural behavior were investigated. The result of the material testis shows that the optimal proportion of expansive additives is 13 percent of cement weight, and the properties of expansive concrete are the same as those of normal concrete in that proportion. Both the experimental cracking load and service load of the expansive concrete members are increased in comparison with those of the normal concrete, but the ultimate load is decreased slightly. In addition to the above results, the deformation of expansive concrete member is lets than that of normal concrete member, and permanent strain which results from cyclic load is decreased. It can be concluded that the use of expansive additives to induce chemical prestress in precast concrete box culvert greatly improves the serviceability.

• International Journal of Concrete Structures and Materials
• /
• 제19권1E호
• /
• pp.3-9
• /
• 2007

This paper presents a numerical procedure for analyzing the joints between precast post-tensioned segments. A computer program for the analysis of reinforced concrete structures was run for this problem. Models of material nonlinearity considered in this study include tensile, compressive and shear models for cracked concrete and a model for reinforcing steel with smeared crack. An unbonded tendon element based on the finite element method, that can describe the interaction between the tendon and concrete of prestressed concrete member, was experimentally investigated. A joint element is newly developed to predict the inelastic behavior of the joints between segmental members. The proposed numerical method for the joints between precast post-tensioned segments was verified by comparison of its results with reliable experimental results.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.281-287
• /
• 2011

최근 프리캐스트 하부 구조에 대한 연구가 많이 이루어지고 있으며 국내 및 국외에서 현장 적용이 이루어지고 있는 실정이다. 그러나 프리캐스트 하부 구조의 경우 대부분 교각의 기둥 부분에 대한 연구에 매진하고 있으나, 프리캐스트 하부 구조를 완성하려면 코핑부 또한 사전 제작 및 현장 운반이 필요한데, 이를 위해서는 코핑부의 경량화를 이루어야 한다. 이렇듯 코핑부의 경량화를 위해서 코핑부 역시 기둥부와 같이 분절화하여 현장에서 조립하는 공법을 적용하여야 교량의 하부 구조 시스템이 완전하게 프리캐스트 하부 구조가 될 수 있을 것이다. 이 연구에서는 사전에 제안된 프리캐스트 교각에 맞는 프리캐스트 코핑부를 기존 연구자에 의하여 제시되어진 모델을 기반으로 한 수정 모델을 제안하였으며, 이를 해석 및 실험 연구를 통하여 거동 분석을 수행하여 그 성능을 분석하였다.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.261-273
• /
• 2017

The control of the deformative behaviour of pre-stressed concrete roof elements for a satisfactory service performance is a main issue of their structural design. Slender light-weight wing-shaped roof elements, typical of the European heritage, are particularly sensitive to this problem. The paper presents the results of deformation measurements during storage and of both torsional-flexural and purely flexural load tests carried out on a full-scale 40.5 m long innovative wing-shaped roof element. An element-based simplified integral procedure that de-couples the evolution of the deflection profile with the progressive shortening of the beam is adopted to catch the experimental visco-elastic behaviour of the element and the predictions are compared with normative close-form solutions. A linear 3D fem model is developed to investigate the torsional-flexural behaviour of the member. A mechanical non-linear beam model is used to predict the purely flexural behaviour of the roof member in the pre- and post-cracking phases and to validate the loss prediction of the adopted procedure. Both experimental and numerical results highlight that the adopted analysis method is viable and sound for an accurate simulation of the service behaviour of precast roof elements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.42-43
• /
• 2019

In-situ production of PC (precast concrete) members can reduce costs by about 14.5% -21.6% compared to in-plant production due to the reduction of transportation costs, factory profits and overhead costs. However, in-situ production of PC members presents a variety of risks, including member production and yard area securing, and lead time for production within the installation period. To solve this, it is necessary be able to analyze and control and monitor the risk factors that influence in-situ production for PC member. The purpose of this study is to develop a dynamic simulation model for in-situ production and erection integrated management for PC members. For this study, risk factor identification, causal loop diagram, and dynamic simulation model construction were performed sequentially. The results of this study will be used as a basis for developing a risk management model for PC in-situ production.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.805-827
• /
• 2016

A new type of precast CFST column to RC beam braced frame is proposed in this paper. A series of shake table tests were conducted to excite a one-third scale six-story model for investigating the global seismic performance of this type of structure against earthquake actions. Particular emphasis was given to its dynamic property, global seismic responses and failure path. Correspondingly, a numerical model built on the basis of fiber-beam-element model, multi-layer shell model and element-deactivation method was developed to simulate the seismic performance of the prototype structure. Numerical results were compared with the measured values from shake table tests to verify the validity and reliability of the numerical model. The results demonstrated that the proposed novel precast CFST column to RC beam braced frame performs excellently under strong earthquake excitations; the "strong CFST column-weak RC beam" and "strong connection-weak member" anti-seismic design principles can be easily achieved; the maximum deflections of precast CFSTC-RCB braced frame satisfied the deflection limitations proposed in national code; the numerical model can properly simulate the dynamic property and responses of the precast CFSTC-RCB braced frame that are highly concerned in engineering practice.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.127-128
• /
• 2023

Recently, OSC (off-site construction) construction has been revitalized as a response to the decline in building quality and productivity due to lack of skilled manpower at construction sites, and PC (precast concrete) construction, a representative OSC construction, is insufficiently applied to public housing.This is the situation.In addition, in the case of general contents appearing in standard specifications, the construction standards for quality assurance remain in the 1990s and do not correspond to the current construction environment.In order to improve the quality of PC member joints, we compared and analyzed Korean and Japanese specifications to establish appropriate standards for PC construction quality control, focusing on the quality of grout used in joints.

• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.407-419
• /
• 2009

이 연구는 조립식 기초부를 갖는 프리캐스트 세그먼트 PSC 교각의 지진거동을 파악하고 이에 대한 상세와 기초자료를 제공하는데 그 목적이 있다. 6개의 프리캐스트 세그먼트 PSC 교각 실험체에 일정 축하중 하에서 횡방향 반복하중을 가하는 준정적 실험을 수행하였다. 사용된 프로그램은 철근콘크리트 구조물의 해석을 위한 RCAHEST이다. 사용된 부착 또는 비부착 텐던요소는 유한요소법에 근거하며 프리스트레스트 콘크리트 부재의 콘크리트와 텐던의 상호작용을 구현할 수 있다. 수정된 접합요소는 세그먼트 접합부의 비탄성거동을 예측할 수 있다. 이 연구에서는 조립식 기초부를 갖는 프리캐스트 세그먼트 PSC 교각의 실험적, 해석적 결과를 제시하였다.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.55-59
• /
• 2013

The analytical model was constituted to evaluate the flexural strength of UHPFRC(ultra high performance fiber reinforced concrete) member. The analytical approach was attemped to study the effect of the joint and the result compared with the experimental study to verify the analytical model. The calculated value tends to underestimate about 23%~25% in comparison with the experimental result of the jointed test member because the bond stress between precast UHPFRC and cast-in-place UHPFRC surface is not considered in the analytical model. But in the case of the continuous test member, the analytical model provides reasonable results for the flexural strength of UHPFRC member.