• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.255-261
• /
• 2000

Tube bending is one of the conventional manufacturing process. Recently, tube bending was highlighted in automotive industry by hydroforming. Tube hydroforming process is divided into pre-bending process and hydroforming process. It's initial state is very important in die cavity of first hydroforming process. So tube bending is important factor of the hydroforming process. In this paper, two pre-bending simulations, by a rotary draw bending machine and a bend die. This paper presents the simulation results in pre-bending process that is used to form an automotive part, tie-bar.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.162-167
• /
• 2004

The low velocity impact characteristics of composite laminate curved beams are investigated to increase damage tolerance and reduce the deflection. Drop weight impact tests of the composite curved beam were performed with respect to pre-load, then the damage after impact was measured by macrography. Also, finite element analyses were performed using ABAQUS to investigate the stress state of composite curved beam with respect to pre-load and impact. From the investigation, it was found that pre-load of the composite curved beams had much influence on impact damage of the curved beam, which showed good agreement with the experiment results.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.69-77
• /
• 2000

The reinforced concrete(RC) flexural members strengthened with steel plate/CFS at soffit have initial stresses and strains in reinforcements and concrete caused by the service loads at the time of retrofitting works. These initial residual stresses and strains of strengthened beams may affect the flexural performance of the rehabilitated beams. The objective of this study is to evaluate and verify the effectiveness of rehabilitation by external bonded steel plates and CFS to the tension face of the beams under three conditions of pre-loading. Thirteen beam specimens are tested and analyzed. Main test parameters are pre-loading conditions, strengthening materials and reinforcement ratio of specimens. The effect of test parameters on the strengthened beams is analyzed from the maximum load capacity, load-deflection relationship, state of stress of the materials. crack propagation phase, and failure modes. Both test results and design formulas of ACI Code provisions are compared and evaluated.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제23권2호
• /
• pp.113-133
• /
• 2020

Pre-service teachers (PST) are students who are developing their mindset, persistence, instructional practices, and perception of tasks from two perspectives: as current students and as future teachers. As part of a larger study with PSTs engaged in a mindset intervention, this study quantitatively investigated PSTs mindset and persistence. During professional development (PD), PSTs engaged in multiple strategies (MS) tasks that promoted changes to PSTs mindset and persistence. PSTs' mindset pre- and post- PD were categorized after attending at least 4 interventions as fixed, mixed, or growth using the theory of intelligence, and their persistence as high or low using the Grit-S. Changes in categorization were noticed and explored for reasons of what could be done to make mindset interventions more effective such as consistently using challenging mathematics tasks with more open ended answers and focusing on discussion based mathematical lessons.

• 대한금속재료학회지
• /
• 제49권10호
• /
• pp.790-796
• /
• 2011

To reduce the heat released during intermetallic reaction, Ni-50at%Al powder compact has been previously annealed at several conditions before the reaction. The effects of the pre-annealing conditions on the reaction synthesis process have been investigated. Experimental results show that the heat released during the reaction synthesis decreased proportionally with increase of the pre-annealing temperature and duration time. The reaction duration period was significantly increased when the intermetallics were formed in the powder compact during the pre-annealing. This was attributed to the fact that the reaction occurred by solid-state diffusion between the un-reacted elemental atoms and that the $NiAl_3$ phase formed predominantly during pre-annealing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1229-1232
• /
• 2004

The ratio of optimized concentration on optical characteristics for phase-separated composite organic films (PSCOF) liquid crystal display is 30% of pre-polymer (NOA65) and 70% of ferroelectric liquid crystal (Felix). The layer structure in ferroelectric liquid crystal cell made by 30% NOA65 and 70% Felix materials is tilt-bookshelf layer structure. The angle of tilt-bookshelf structure are 17$^{\circ}$, 12$^{\circ}$ which are almost same of tilt angle of ferroelectric liquid crystal in Sm $C^{\ast}$ phase. We know that this result is from compensating the layer buckling. In this paper, we will discuss the effect of layer structure in PSCOF cell on ratio of concentration between pre-polymer and liquid crystal by x-ray measurements. We believe that technology of PSCOF is a good solution to solve the problems of align-defect and mechanical shock for future TV application and plastic LCD.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.53-61
• /
• 2003

A molecular-thermodynamic model is developed for the salt-induced protein precipitation. The protein molecules interact through four intermolecular potentials. An equation of state is derived based on the statistical mechanical perturbation theory with the modified Chiew's equation for the fluid phase, Young's equation for the solid phase as the reference system and a perturbation based on the protein-protein effective two body potential. The equation of state provides an expression for the chemical potential of the protein. In a single protein system, the phase separation is represented by fluid-fluid equilibria. The precipitation behaviors are simulated with the partition coefficient at various salt concentrations and degree of pre-aggregation effect for the protein particles. In a binary protein system, we regard the system as a fluid-solid phase equilibrium. At equilibrium, we compute the reduced osmotic pressure-composition diagram in the diverse protein size difference and salt concentrations.

• Advances in nano research
• /
• 제6권4호
• /
• pp.357-375
• /
• 2018

Two dimensional (2D) atomic layered nanomaterials exhibit some of the most striking phenomena in modern materials research and hold promise for a wide range of applications including energy and biomedical technologies. Graphene has received much attention for having extremely high surface area to mass ratio and excellent electric conductivity. Graphene has also been shown to maximize the activity of surface-assembled metal nanoparticle catalysts due to its unique characteristics of enhancing mass transport of reactants to catalysts. This paper specifically investigates the strategy of pre-formed nanoparticle self-assembly used for the formation of various metal nanoparticles supported on graphene families such as graphene, graphene oxide, and reduced graphene oxide and aims at understanding the interactions between ligand-capped metal nanoparticles and 2D nanomaterials. By varying the functional groups on the ligands between alkyl, aromatic, amine, and alcohol groups, different interactions such as van der Waals, ${\pi}-{\pi}$ stacking, dipole-dipole, and hydrogen bonding are formed as the 2D hybrids produced.

• 한국컴퓨터정보학회논문지
• /
• 제16권5호
• /
• pp.127-134
• /
• 2011

화면을 모니터링하고 있는 시스템에서 사용자가 시선을 화면에 집중하고 있는가를 판단하고 제어할 수 있는 유한 상태 기계를 설계 및 구현하였다. 유한 상태 기계는 화면을 응시하고 있는 눈동자의 상황에 대한 집합과 화면에 집중하고 있는 상태의 집합을 이를 기반으로 구성되었다. 특히 상태 집합을 3종류-주요 상태, 예비 상태, 잠재 상태로 분류하였다. 이전의 상황과 현재의 상황을 연계하여 현 상태를 판단하는 상황 이력을 이용함으로써 판단의 정확도를 높였다. 이 유한 상태 기계에 대하여, 기존의 눈동자 검출 방법에서 얻은 눈동자 위치 데이터를 이용하여 시뮬레이터를 구현하고 작동과정의 모니터링을 통하여 검증하였다. 실제 눈동자의 이미지를 바탕으로 실험한 결과로 상황 이력을 이용한 판정은 현재의 응시 상태가 1회성 또는 장기적인 상태인가를 판단할 수 있는 장점을 보였다.

• 동의신경정신과학회지
• /
• 제26권1호
• /
• pp.63-78
• /
• 2015

Objectives: Pinelliae Rhizoma has traditionally been used as an anti-depressant in oriental medicine. This study is to investigate the effect of Pinelliae Rhizoma extract (PRe) on psychological stress in genome wild expression of mice. Methods: After giving physical stress to mice, PRe was orally administered with 100 mg/kg/day for five days. After extracting whole brain tissue from the mice, their genome changes were observed by micorarray analysis method. The genome changes were analyzed by IMAGENE 4.0, TREEVIEW, FatiGo algorithems, BOND database, cytoscape program, etc. Results: 1. PRe administered group were remained at normal level; 60% of increase was shown in expressed genes by physical stress, and 65% of decrease was shown in expressed genes by psychological stress. 2. Genes with increased expression in control group that remained at a normal state in PRe administered group were involved with the gene of a cellular metabolic process on biological process, protein binding on molecular function, and cell part on cell composition. The pathway was found to be cytokin-cytokin receptor interaction. 3. Genes with decreased expression in control group that remained at a normal state in PRe administered group were involved with the gene of a cellular metabolic process on biologiacl detail and coupled ATPaes activity on molecular function. This gene related path was Ubiquintin mediated proteolysis etc. 4. Core node genes analyzed by protein interaction network were Vinculin, Cell sdivision cycle 42 homolog (S. cerevisiae) etc. They played an important role in maintaining cytoskeleton and controlling cell cycle. Conclusions: Several genes were up-regulated and down-regulated in response to psychological stress. The expression of most of the genes that were altered in response to psychological stress was restored to normal levels in PRe treated mice. When the interaction network information was analyzed, the recovery of the core node genes in PRe treated mice indicates that this final set of genes may be the effective target of PRe.