• 대한물리의학회지
• /
• 제4권3호
• /
• pp.165-174
• /
• 2009

Purpose：This study was performed for effects of gait training on treadmill and stable surface which influenced on the lower limbs muscular activity needed in gait, plantar foot pressure with hemiplegic patients caused by cerebrovascular accident. Methods：Two groups of adult hemiplegia(n=20) were allocated randomly in this study: treadmill gait training group and control group. The gait training program was provided to experimental groups for 8 weeks (5 times a week). Measurements of pre and post experiment were plantar foot pressure. For measuring muscular activation rectus femoris, biceps femoris, tibialis anterior, gastrocnemius were detected. Results：The results of this study showed that in comparison of pre and post changes of gait training, the treadmill gait training group has noticeable changes than other groups in activity of rectus femoris and tibialis anterior, the control group revealed statistically significant differences in plantar foot pressure Toe2-5, M1, M3, M5, MF area, activity of gastrocnemius. Conclusion：These results mean gait training resulted by treadmill, stable surface provides effective muscle activation and plantar foot pressure with stroke.

• BMB Reports
• /
• 제42권7호
• /
• pp.411-417
• /
• 2009

Transcriptional activation domain (TAD) in virion protein 16 (VP16) of herpes simplex virus does not have any globular structure, yet exhibits a potent transcriptional activity. In order to probe the structural basis for the transcriptional activity of VP16 TAD, we have used NMR spectroscopy to investigate its detailed structural features. Results show that an unbound VP16 TAD is not merely "unstructured" but contains four short motifs (residues 424-433, 442-446, 465-467 and 472-479) with transient structural order. Pre-structured motifs in other intrinsically unfolded proteins (IUPs) were shown to be critically involved in target protein binding. The 472-479 motif was previously shown to bind to $hTAF_{II}31$, whereas the $hTAF_{II}31$-binding ability of other motifs found in this study has not been addressed. The VP16 TAD represents another IUP whose pre-structured motifs mediate promiscuous binding to various target proteins.

• 한국컴퓨터산업학회논문지
• /
• 제8권2호
• /
• pp.123-130
• /
• 2007

본 논문에서는 신호조정 회로로서 필수적인 다중 채널 심장 전기도 전치 증폭기를 제작하기 위한 설계조건의 분석 및 전기 회로적 해석을 수행하였다. 설계된 회로는 기존의 64 채널의 공간 분해능을 향상시키기 위하여 128채널로 구성하였으며, 전치증폭기는 입력회로부, 차동증폭부, 오른다리구동회로 및 주증폭기의 노치필터로 구성되도록 설계하였다.

• 한국컴퓨터정보학회논문지
• /
• 제21권12호
• /
• pp.11-18
• /
• 2016

Magnetic resonance image (MRI) is widely used in brain research field and medical image. Especially, non-invasive brain activation acquired image technique, which is functional magnetic resonance image (fMRI) is used in brain study. In this study, we investigate brain activation occurred by LED light stimulation. For investigate of brain activation in experimental small animal, we used high magnetic field 9.4T MRI. Experimental small animal is Balb/c mouse, method of fMRI is using echo planar image (EPI). EPI method spend more less time than any other MRI method. For this reason, however, EPI data has low contrast. Due to the low contrast, image pre-processing is very hard and inaccuracy. In this study, we planned the study protocol, which is called block design in fMRI research field. The block designed has 8 LED light stimulation session and 8 rest session. All block is consist of 6 EPI images and acquired 1 slice of EPI image is 16 second. During the light session, we occurred LED light stimulation for 1 minutes 36 seconds. During the rest session, we do not occurred light stimulation and remain the light off state for 1 minutes 36 seconds. This session repeat the all over the EPI scan time, so the total spend time of EPI scan has almost 26 minutes. After acquired EPI data, we performed the analysis of this image data. In this study, we analysis of EPI data using statistical parametric map (SPM) software and performed image pre-processing such as realignment, co-registration, normalization, smoothing of EPI data. The pre-processing of fMRI data have to segmented using this software. However this method has 3 different method which is Gaussian nonparametric, warped modulate, and tissue probability map. In this study we performed the this 3 different method and compared how they can change the result of fMRI analysis results. The result of this study show that LED light stimulation was activate superior colliculus region in mouse brain. And the most higher activated value of segmentation method was using tissue probability map. this study may help to improve brain activation study using EPI and SPM analysis.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.151-158
• /
• 2020

ACF preparation from different materials has been attached with great attention during these years. This study was conducted to prepare activated carbon fiber (ACF) from luffa through the processes i.e pre-treatment, pre-oxidation and carbonization activation. Besides, this study also characterizes the ACF and its effect, i.e effect of pre-oxidation time and temperature also activation time and temperature on the compressive strength of ACF were investigated. The results from SEM, BET, FTIR and XRD show that the ACF is very efficient. The products under the optimum conditions had a specific surface area of 478.441 m2 /g with an average pore diameter of 3.783nm, and a pore volume of 0.193 cm3 /g. The surface of the luffa fiber is degummed and exposed, which is beneficial to the subsequent process and the increase of product properties. The compressive strength of HP-ACF was prepared under the optimum conditions, which can reach 0.2461 MPa. ACF is rich in micro-pores and has a good application prospect in the field of environmental protection.

• 대한물리치료과학회지
• /
• 제17권1_2호
• /
• pp.23-32
• /
• 2010

Purpose: The purpose of this study was to investigate trunk and gluteal muscle activation during one-leg standing or two-leg standing with lumbar stabilizing taping using non-elastic tape. Method: The subjects of this study were twenty subjects(man=11, women=9) who be in good physical health and have not problem to back muscle and one leg standing. The surface electromyographic(EMG) data were recorded on external oblique(EO), gluteus medius(GMed), gluteus maximus(GMax), quadratus lumborum(QL) while pre- and post-lumbar stabilizing taping in two-leg standing and one-leg standing. The analysis of data was performed using the paired samples t-test to compare the difference of EMG activity of pre and post lumbar stabilizing taping. Result: Contrast of pre-lumbar stabilizing taping the muscle activity of QL in post-lumbar stabilizing taping is significant decrease on two-leg standing posture(p<.05), and the muscle activity of GMed is significant increase on one-leg standing posture(p<.05). Thus, we suggest that lumbar stabilizing taping using by functional tape will be able to affect on lumbar stability and gluteal muscle retraining.

• Macromolecular Research
• /
• 제17권2호
• /
• pp.121-127
• /
• 2009

The cure kinetics of the epoxy-layered, silicate nanocomposites were studied by differential scanning calorimetry under isothermal and dynamic conditions. The materials used in this study were o-cresol novolac epoxy resin and phenol novolac hardener, with organically modified layered silicates. Various kinetic parameters, including the reaction order, activation energy, and kinetic rate constants, were investigated, and the storage stability of the epoxy-layered silicate nanocomposites was measured. To synthesize the epoxy-layered silicate nanocomposites, the phenolic hardener underwent pre-intercalation by layered silicate. From the cure kinetics analyses, the organically modified layered silicate decreased the activation energy during cure reaction in the epoxy/phenolic hardener system. In addition, the storage stability of the nanocomposite with the pre-intercalated phenolic hardener was significantly increased compared to that of the nanocomposite with direct mixing of epoxy, phenolic hardener, and layered silicate. This was due to the protective effect of the reaction between onium ions and epoxide groups.

• 열처리공학회지
• /
• 제17권5호
• /
• pp.278-282
• /
• 2004

Effect of pre-treatment on the gas nitriding process of austenitic stainless steels has been investigated and the following results were obtained. Minimum pre-treatment time was decreased to 5min with increasing treatment temperature from $200^{\circ}C$ to $600^{\circ}C$. Surface activation effect by the pre-treatment was maintained in the air up to holding time of 64hr, judging from the analysis result of gas nitrided specimens. The Depth of nitrided layer of STS 304 and 316 stainless steels were ranged from $5{\mu}m$ to $90{\mu}m$ at $440^{\circ}C{\sim}600^{\circ}C$. The X-ray diffraction intensity for austenitic stainless steels were increases as nitriding temperature from $440^{\circ}C$ to $600^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.99-102
• /
• 2002

The BSCCO superconductor materials of using Self-propagating High-temperature Synthesis (SHS) were studied. Mechano-chemical activation - as a pre-treatment of the reactants mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product. In this paper as an effort for fabricating the SHSed BSCCO superconductor powder SHS method was considered to application in the synthesis of superconducting materials.

• 한국광물학회지
• /
• 제27권3호
• /
• pp.115-124
• /
• 2014

금-은 함유 황화광물 정광으로부터 Au와 Ag를 용출시키기 위하여 황화광물 정광을 건식과 습식으로 전처리하였다. 전처리한 황화광물에 대하여 광물학적 연구와 티오요소 용출실험을 수행하였다. 평균입도와 등전위는 정광시료에서 보다 건식 전-처리 시료에서 낮게 나타났고, 건식 전-처리 시료 보다 습식 전-처리 시료에서 더 낮게 나타났다. XRD 분석결과, 습식 전-처리 시료에서만 비정질의 특성이 나타났다. 정광시료에서, 최대의 Au, Ag 용출인자는 1.0 g의 티오요소, 1.0 M의 황산제2철, 2.0 M의 황산 농도에서 그리고 $60^{\circ}C$의 용출온도에서였다. Au, Ag용출률은 건식 전-처리 시료에서 보다 습식 전-처리 시료에서 언제나 많이 그리고 빠르게 나타났다. 따라서, 향후 적당한 미분쇄 첨가제와 시간으로 전처리를 수행하고 비-시안 용매를 적용한다면 친환경적으로 Au, Ag를 용출시킬 수 있을 것으로 기대된다.