• Journal of Ginseng Research
• /
• v.30 no.4
• /
• pp.188-193
• /
• 2006

We induced the activation of melanocytes in the epidermis of C57BL/6 mice by ultraviolet B (UVB) irradiation and observed the effect of red ginseng (RG) on the formation, and decrease of UVB-induced epidermal mel-anocytes. C57BL/6 mice were irradiated by UVB $80mJ/cm^2$ (0.5 mW/sec) daily for 7 days, and RG was intraperitoneally or topically applied pre- or post-irradiation. For the estimation of change of epidermal melanocytes, light microscopic observation with dihydroxyphenylalanine (DOPA) stain was performed. Split epidermal sheets prepared from the ear of untreated mice exhibited 11-16 $melanocytes/mm^2$, and one week after UV irradiation, the applied areas show an increased number of strongly DOPA-positive melanocytes with stout dendrites. But intraperitoneal or topical treatment with RG before each irradiation interrupted UVB-induced pigmentation and resulted in a marked reduction in the number of epidermal melanocytes as compared to radiation control skin. The number and size of DOPA-positive epidermal mel-anocytes were also significantly decreased in intraperitoneally injected or topically applicated group after irradiation with RG at 3rd and 6th weeks after irradiation. The present study suggests the RG as inhibitor of UVB-induced pigmentation and depigmenting agent.

• Fire Science and Engineering
• /
• v.27 no.4
• /
• pp.41-46
• /
• 2013

The present study has been conducted to investigate the reaction kinetics and pyrolysis parameters for flame propagation analysis of furniture material components. TGA measurement for component materials such as MDF (medium density fiberboad) panel including coating material, synthetic leather and foam cushion are performed under maximum temperature of $600^{\circ}C$ and heating rate of $10^{\circ}C/min$. The results of TGA have shown that the peak temperature of MDF panel was $324^{\circ}C$ and the initial peak temperature of coating material decreased by $270{\sim}280^{\circ}C$. In the case of synthetic leather and foam materials, the reference temperature and reference rate depend on the type of polymer consisting the sample, the initial kinetic characteristics was classified into 2 categories of about $270^{\circ}C$ and $420^{\circ}C$ of reference temperature for the tested synthetic materials. The present study showed the pyrolysis parameters of reference temperature and reference rate proposed by Lyon to evaluate the pre-exponential factor and activation energy. The present study can contribute to improve the reliability of computational fire analysis and enhance the understanding of fire propagation phenomena based on the thermal properties study of material.

• Education of Primary School Mathematics
• /
• v.10 no.2
• /
• pp.125-139
• /
• 2007

The purpose of this study seeks entry into a method to make the use of educational aids popular. To achieve it, it is observed that instructions applying worksheets to make an activation of use of educational aids have influences on mathematical achievement and mathematical disposition and attitude. All variables exception with the frequence of use of educational aids are controlled in both experimental group and comparative group. According to the result, there is no significant difference of mathematical achievement in pre t-test between two groups, while experimental group get 10 points higher than comparative group in average (t=0.519, p<0.01). On the other hand, within intra-experimental group the influences of use of educational aids on mathematical achievement is positive without the achievement levels of students. The difference dependent on the levels of student is sought by ANCOVA using prescores as a covariance, and it appears in the significance level of 5%(F=4.885, p<0.05), and the effect is more in the lower level of students than in the middle and high level.

• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.105-110
• /
• 2017

Objectives: This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos $Odontol\acute{o}gicos$) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated. Materials and Methods: Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05). Results: There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05). Conclusions: QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.49-54
• /
• 2003

In this paper, we propose a controller with the self-organizing neural network compensator for compensating PID controller's response. PID controller has simple design method but needs a lot of trials and errors to determine coefficients. A neural network control method does not have optimal structure as the parameters are pre-specified by designers. In this paper, to solve this problem, we use a self-organizing neural network which has Back Propagation Network algorithm using a Gaussian Potential Function as an activation function of hidden layer nodes for compensating PID controller's output. Self-Organizing Neural Network's learning is proceeded by Gaussian Function's Mean, Variance and number which are automatically adjusted. As the results of simulation through the second order plant, we confirmed that the proposed controller get a good response compare with a PID controller. And we implemented the of controller performance hydraulic servo motor system using the DSP processor. Then we observed an experimental results.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.233-242
• /
• 2014

PURPOSE: The purpose of this study was to determine the correlation between the hip adductor muscles and abdominal muscles during bridge exercise. METHOD: Participants who met the criteria for this study(n=36) were divided into the three groups. The first experimental group performed normal bridge exercises and the second group performed bridge exercises with the contraction of the hip adductor muscles and the control group didn't perform any exercise. Transversus abdominis muscle thickness was measured by ultrasound imaging with a special transducer head device, at pre exercise, after 2 weeks, 4 weeks, and 6 weeks. RESULT: Data were analyzed using repeated ANOVA with the level of significance set at ${\alpha}=.05$. Transversus abdominis muscle thickness was influenced by contraction of the hip adductor muscles during bridge exercise in people without lower back pain. Compared with normal bridge exercise, transversus abdominis muscle thickness significantly increased in thickness during bridge exercise with contraction of the hip adductor muscles(p<.05). CONCLUSION: The results from this study showed that contraction of the hip adductor muscles during bridge exercise increased change in the transversus abdominis muscle thickness. These results can be a good source to prevent low back pain due to hip adductor weakness. Therefore, inducing activation of hip adductor with abdominal stabilizing exercise is more effective in patients with low back pain.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.52-58
• /
• 2012

Hydrogen-delayed fracture (HDF) was analyzed from the deposited weld metals of 600-MPa and 800-MPa flux-cored arc (FCA) welding wires, and then from the diffusible hydrogen behavior of the weld zone. Two types of deposited weld metal, that is, rutile weld metal and alkali weld metal, were used for each strength level. Constant loading test (CLT) and thermal desorption spectrometry (TDS) analysis were conducted on the hydrogen pre-charged specimens electrochemically for 72 h. The effects of microstructures such as acicular ferrite, grain-boundary ferrite, and low-temperature-transformation phase on the time-to-failure and amount of diffusible hydrogen were analyzed. The fracture time for hydrogen-purged specimens in the constant loading tests decreased as the grain size of acicular ferrite decreased. The major trapping site for diffusible hydrogen was the grain boundary, as determined by calculating the activation energies for hydrogen detrapping. As the strength was increased and alkali weld metal was used, the resistance to HDF decreased.

• The Journal of Internal Korean Medicine
• /
• v.40 no.3
• /
• pp.425-442
• /
• 2019

Objectives: This study aimed to reveal the pharmacological properties of the newly prescribed herbal mixture, Chenmadansamgamibokhap-tang(CDBT), against hypoxia-induced neuronal cell injury (especially mouse hippocampal neuronal cell line, HT-22 cells) and their corresponding mechanisms. Methods: A cell-based in vitro experiment, in which a hypoxia condition induced neuronal cell death, was performed. Various concentrations of the CDBT were pre-treated to the HT-22 cells for 4 h before 18 h in the hypoxia chamber. The glial cell BV-2 cells were stimulated with $IFN{\gamma}$ and LSP to produce inflammatory cytokines and reactive oxygen species. When the neuronal HT-22 cells were treated with this culture solution, the drug efficacy against neuronal cell death was examined. Results: CDBT showed cytotoxicity in the normal condition of HT-22 cells at a dose of $125{\mu}g/mL$ and showed a protective effect against hypoxia-induced neuronal cell death at a dose of $31.3{\mu}g/mL$. CDBT prevented hypoxia-induced neuronal cell death in a dose-dependent manner in the HT-22 cells by regulating $HIF1{\alpha}$ and cell death signaling. CDBT prevented neuronal cell death signals and DNA fragmentation due to the hypoxia condition. CDBT significantly reduced cellular oxidation, cell death signals, and caspase-3 activities due to microglial cell activations. Moreover, CDBT significantly ameliorated LPS-induced BV-2 cell activation and evoked cellular oxidation through the recovery of redox homeostasis. Conclusions: CDBT cam be considered as a vital therapeutic agent against neuronal cell deaths. Further studies are required to reveal the other functions of CDBT in vivo or in the clinical field.

• Herbal Formula Science
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2019

Objectives : Hyperthermia is a widely used therapeutic tool for cancer therapy and a well-known inducer of apoptosis. Although the Cinnamomi cortex (CC) is a potent anticancer agent for several human carcinomas, it is less potent in the human U937 cell line. To explore any enhancing effects of CC with hyperthermia induced apoptosis, this study investigated the combined effects and apoptotic mechanisms of hyperthermia and CC in U937 cells. Methods : U937 cells were heat treated at $43^{\circ}C$ for 30 min with or without pre-treatment for 1h with CC and then incubated at $37^{\circ}C$ with 5% $CO_2$. Cell viability was analyzed by MTT assay and Trypan blue assay. Morphological changes reflecting apoptosis were visualized under microscope. Synergy effect of CC combined with hyperthermia were calculated by Compusyn software. The expression of proteins related to apoptosis and signaling pathways was determined by western blotting. Results : Hyperthermia with CC reduced cell viability and induced apoptosis. Combined hyperthermia and CC treatment markedly augmented apoptosis by upregulating proapoptotic proteins and suppressing antiapoptotic proteins, culminating in caspase-3 activation. Furthermore, the combined treatment, decreased the expression of in Bcl-2 family, cyclin D1, VEGF, MMP2 and MMP9 expression. Conclusion : This study provides compelling evidence that hyperthermia, in combination with CC, is a promising therapeutic strategy for enhancement of apoptosis and suggests a promising therapeutic approach for cancer.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.31-39
• /
• 2017

Due to quantitative growth focused on short-term field placement and excessive competition between universities, the need for long-term field placement model is increasing and participation of government and universities is increasing for effective on-the-job training. In order to solve the problems of shortage of R&D manpower in small and medium sized companies, Kumoh Institute of Technology and three participating universities have been conducting industrial internship as R&D long-term field placement program from 2015. Students undertake long-term on-the-job training in the R & D department for six months to improve their R & D skills and strengthen their work capacity. In this paper, we propose effective ways of stimulating cooperative employment through long-term field placement in R&D departments from pre-preparation stage to ending stage through comparative analysis of cases of industrial internship in 2015 and 2016.