• 제목/요약/키워드: pp fiber

검색결과 347건 처리시간 0.032초

홍조류섬유보강 폴리프로필렌 바이오복합재료의 제조 및 특성 분석 (Manufacturing and Characterization of Red algae fiber/Polypropylene Biocomposites)

  • 이민우;서영범;한성옥
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2008년도 춘계학술대회
    • /
    • pp.178-182
    • /
    • 2008
  • The bleached red algae fiber(BRAF) showed very similar crystallinity to the cellulose, furthermore, it has higher thermal decomposition temperature than that of the microcrystalline cellulose(MCC). Polypropylene biocomposites reinforced with BRAF have been fabricated with various BRAF contents by compression molding method and their mechanical and thermomechanical properties have been studied. The mechanical strength as tensile, impact and flexural modulus of BRAF/PP biocomposites were gradually improved with increasing the BRAF content, and thermal property which against the thermal expansion was markdly improved, especially. These results are compared with chopped non-woody fibers as Henequen or Kenaf, BRAF was more effective for fabrication of biocomposites reinforced small-sized fibers. The red algae fiber reinforced biocomposites has the applicability such as electronics, biodegradable products and small-structure composites.

  • PDF

PE/PP Blend형 fiber/Filler 보강 복합 성형체

  • 강영구;조명호
    • 한국산업안전학회:학술대회논문집
    • /
    • 한국안전학회 2002년도 추계 학술논문발표회 논문집
    • /
    • pp.166-171
    • /
    • 2002
  • 폐자원의 재활용은 현재 미래산업을 발전시키는데 중요한 변수로 작용하고 있으며, 폐플라스틱의 경우 통신 케이블 덕트, 고속전철용 케이블 덕트, 선박용 구조체등 고부가가치 제품으로의 기술개발이 활발히 진행되고 있다. 폐 Polyolefin 계열의 수지는 성형가공이 적절한 MFI(Melt flow index)와 뛰어난 기계적 물성, 가공 성형성 등으로 인해 다양한 형태와 용도로 recycling되고 있으나, 재생시 다수 Grade에 의한 분별, 분리수거의 어려움, 상용성결여, 난연성 부재 그리고 70% 대의 기계적 물성 회복율로 인해 그 용도가 제한되고 있는 실정이다.(중략)

  • PDF

화재피해를 입은 PP섬유 혼입 고강도 콘크리트부재의 비파괴 검사 (Non destructive test of fire-damaged high strength RC columns with polypropylene fiber)

  • 정혜원;최은규;신영수;이차돈;권영진
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 추계 학술발표회 논문집
    • /
    • pp.65-68
    • /
    • 2006
  • This study is aimed to investigate the strength variation of fire-damaged reinforced concrete column with polypropylene by non-destructive test. It is studied to infer the recovery degree of residual strength of fire-damaged concrete. For measuring the surface hardness of RC columns, Schmidt hammer test is used. Testing is performed four-times: before fire test, directly after fire test, after 30 days and after 4 months.

  • PDF

고분자에 대한 산화아연(ZnO) 나노입자의 열안정화 효과 (Effect of ZnO Nano Particles on Thermal Stabilization of Polymers)

  • 조광수;홍정일;정찬일
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.171-172
    • /
    • 2002
  • 나노미터 규모의 작은 충전제 입자는 마이크로 미터 규모의 일반적인 충전제 입자에 비해서 많은 다른 점이 발견되어 왔다. 이 연구에서는 최근에 알게된 입경이 100nm 이하인 ZnO 입자가 radical 중합된 고분자의 열안정성을 향상시키는 현상을 보다 자세하게 연구한 것이다. HDPE, LDPE, LLDPE, PP 및 PS를 열분해가 아주 느리게 일어나는 낮은 RPM으로 Haake사의 Torque Rheometer의 internal mixer 안에서 녹인 후 평균입경 49nm인 ZnO 나노입자를 약4분간 충부히 분산되도록 혼합하고 50 RPM으로 혼합속도를 높여서 시간에 따른 Trque의 변화를 측정하므로써 열안정성 효과를 관찰하였다. (중략)

  • PDF

오토클레이브 양생시간에 따른 경량기포콘크리트의 강도 변화에 관한 실험적 연구 (Strength Variations of Light Weight Foamed Concrete According to the Autoclaving Time)

  • 강철;강기웅;곽은구;노재명;권기주;김진만
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
    • /
    • pp.57-60
    • /
    • 2005
  • This is the experimental study on the strength development of the light weight concrete block according to the autoclaving time. The calcareous source used the cement, siliceous material used the bottom ash ground to fine particle, and the PP fiber used to increase toughness. The results of this experiment are as follows. According to the increase of autoclaving time and the fiber content, compressive and flexural strengths are increased. Despite of the changes of the autoclaving time, tobermorite was produced on each of the specimens. However, the phase of tobermorite was changed in accordance with the changes of autoclaving time.

  • PDF

섬유 혼입량에 따른 고강도 콘크리트 폭렬 특성 (The Spalling Characteristics of High Strength Concrete with Fiber Content)

  • 박찬규;이승훈
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
    • /
    • pp.387-390
    • /
    • 2005
  • Recently, in order to reduce the spalling of high strength concrete under fire, the addition of organic fibres to high strength concrete has been investigated. In this study, the effect of organic fibre content on the spalling of high strength concrete was experimantally investigated. Two types of fibre, polypropylene(PP) and polyvinyl alcohol(PVA) fibres, were selected, and three water/binder ratios were selected, which were W/B $30\%,\;24.\%,\;and\;16\%$, respectively. As a result, it appears that as the concrete strength increases, the fiber content for prevention spalling increases. When W/B ratios are $30\%,\;24.9\%$, the additions of $0.1vol.\%$ and $0.2vol.\%$, respectively, appear to avoid the spalling in this study.

  • PDF

Studies on Borassus fruit fiber and its composites with Polypropylene

  • Sudhakara, P.;Obi Reddy, K.;Prasad, C. Venkata;Jagadeesh, Dani.;Kim, H.S.;Kim, B.S.;Bae, S.I.;Song, J.I.
    • Composites Research
    • /
    • 제26권1호
    • /
    • pp.48-53
    • /
    • 2013
  • This paper summarizes the structural characterization of borassus fruit fibers by means of various characterization techniques, optimization of alkali treatment of borassus fruit fine fibers (BFF) with a 5% concentration sodium hydroxide solution for different time intervals (1, 4, 8 and 12 h) and the changes occurring in borassus fibers. This paper also discusses the manufacturing of BFF/PP compotes using MAPP as a compatibilizer in addition to alkali treatment. Composites were evaluated for their mechanical and morphological properties. The tensile strength and modulus, flexural strength and modulus and impact strength were increased for alkali treated/MAPP composites by 4.5%, 17%, 17.2 %, 9% and 10% respectively.

수열합성반응에 의한 경량콘크리트 블록 개발에 관한 기초적 연구 (The Fundamental Study on the Development of Light Weight Concrete Block by the Hydro-Thermal Synthetic Reaction)

  • 강철;강기웅;정지용;곽은구;권기주;김진만
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
    • /
    • pp.461-464
    • /
    • 2005
  • As the research on the development of the lightweight concrete block by the hydro-thermal synthetic reaction mixed with the calcareous material and bottom ash that is used less among siliceous material, we studied on the physical and chemical characteristics in the changes of hydro-thermal synthetic reaction of lightweight concrete block compounded with the PP fiber to increase flexural toughness and to prevent fragility failure. The results of the experiment are as follow. According to the increase of hydro-thermal synthetic reaction and the fiber content, compressive and flexural strength increased. Despite the changes of the hydro-thermal synthetic reaction time, tobermorite was produced on each of the specimens similarly. However, the phase of tobermorite was changed in accordance with the changes of time. Also, $CaCo_{3}$ appeared on the surface of the 9 hour hardened specimen.

  • PDF

하이브리드 섬유보강 고강도콘크리트 기둥부재의 내화성능 (Fire Resistance Performance for Hybrid Fiber Reinforced High Strength Concrete Column Member)

  • 원종필;장창일;이상우;김흥열;김완영
    • 콘크리트학회논문집
    • /
    • 제20권6호
    • /
    • pp.827-832
    • /
    • 2008
  • 본 연구에서는 고강도콘크리트의 내화성능 향상을 위해 사용하고 있는 폴리프로필렌섬유와 강섬유 혼입에 따른 설계 강도 60 MPa급 고강도콘크리트 기둥의 내화특성을 평가하였다. 고강도 기둥 콘크리트 공시체의 내화특성 평가를 위하여 ISO-834 가열 곡선을 적용하여 내화실험을 실시하였다. 실험결과 섬유보강재를 혼입하지 않은 경우 폭렬이 심하게 발생하였으며 내부온도도 높게 나타났다. 폴리프로필렌 섬유를 혼입한 고강도콘크리트 기둥 부재의 경우 폭렬이 발생하지 않았으며 내부온도도 섬유보강재를 혼입하지 않은 경우보다 낮게 나타났으나 내부온도 증가에 있어서는 편차가 심해 내부온도 저하에는 큰 효과가 없는 것으로 나타났다. 폴리프로필렌섬유와 강섬유를 혼입한 기둥 공시체의 경우 폭렬이 발생하지 않았으며 가장 낮은 내부온도를 나타내 우수한 내화성능을 나타냈다.

Multimedia 기기에의 적용을 위한 CFRTP에 대한 전자파 특성의 평가 (The Evaluation of the Characteristics of Electromagnetic Waves on CFRTP for Multimedia Instrument Applications)

  • 김동진
    • 한국전자파학회논문지
    • /
    • 제8권3호
    • /
    • pp.254-263
    • /
    • 1997
  • 通信 및 電子훌業의 發達에 따라, 電磁波放射에 對한 밟素鐵維彈化樹(CFRTP)의 電磁波 避廠效果(SE)를 冊究하는 것은 重要하다. 本R究에서는 밟素熾維(CF)의 避빼옷效果를 電波8홉室內에서, 驗的으로 測定하였다. 使用한 樹服는 PC, PP, PEl, PMMA 및 PA이다. 實嚴은 分光分析器에 의해 鋼避蘇箱子와 모노폴안테나를 使用해 修行하였다. 훌훌結果로부터 CF는 良好한 電磁波適嚴材의 한 候補임을 알 수 있었다. SE는 CF의 積層의 增加에 따라 增加하였다. 徵小한 揚傷의 增加는 CF의 平面密度, 透過두께 및 反射角의 增加로 인해 SE를 增加 시켰다. SE에 미치는 다른 特性들은 母材樹服, 안테나問의 距離 및 노이즈의 周波數에 따라 달랐다.

  • PDF