• Computers and Concrete
• /
• 제20권2호
• /
• pp.197-204
• /
• 2017

Typically, high lime fly ash (Class C) has been characterized as a fly ash, which at lower replacement levels is not as effective as the low lime (Class F) fly ash, in mitigating alkali-silica reaction (ASR) in portland cement concrete. The influence of fineness of Class C, obtained by grinding virgin fly ash into finer particles, on its pozzolanic reactivity and ASR mitigation performance was investigated in this study. In order to assess the pozzolanic reactivity of mortar mixtures containing virgin or ground fly ashes, the strength activity index (SAI) test and thermo-gravimetric analysis (TGA) were conducted on the mortar cubes and paste samples, respectively, containing virgin fly ash or two ground fly ashes. In addition, to evaluate any improvement in the ASR mitigation of ground fly ashes compared to that of the virgin fly ash, the accelerated mortar bar test (AMBT) was conducted on the mortar mixtures containing different dosages of either virgin or ground fly ashes. In all tests crushed glass aggregate was used as a highly reactive aggregate. Results from this study showed that the finest fly ash (i.e., with an average particle size of 3.1 microns) could increase the flow ability along with the pozzolanic reactivity of the mortar mixture. However, results from this study suggested that the fineness of high lime fly ash does not seem to have any significant effect on ASR mitigation.

• 한국세라믹학회지
• /
• 제11권1호
• /
• pp.10-18
• /
• 1974

The hydration at $23^{\circ}C$ between $Ca(OH)_2$ and siliceous materials with various compositions of silica gel and quartz were studied in paste state, and also diatomite was empolyed as another form of silica. The effect of the structural state of silica on the pozzolanic reactivity was investigated by X-ray, DTA, electron microscopy, and chemical analysis. The results obtained were as follows. (1) The molar ratio of $Ca(OH)_2$ to silica gel(C/Sg) being changed in 0.49, 0.81 and 1.22, the free $Ca(OH)_2$ was disappeared within six hours, three days and two weeks respectively and ill-crystallized CSH(I) was formed. However, in the case fo molar ratio of C/Sg=2.45, almost lime was remained uncombinedly after twenty four weeks yet. (2) Though the molar ratio C/Sg of diatomite was 0.71, the hydration was stabilized at three weeks and the result exhibited very peculiar characteristics from silica gel. (3) Pozzolanic reactivity of quartz was negligible, but $\alpha$-cristobalite in diatomite showed appreciable reactivity. (4) The thermal curves showed the exothermic peaks in the range 830 to $930^{\circ}C$ and lower broad peaks at high temperature in the initial steps of hydration, transfered to lower temperature with sharp peaks by proceeding of hydration. (5) The samples containing more silica gel exhibited higher pozzolanic reactivity and martar strength, but the diatomite gave remarkable result for them and they were matched to the strength development rate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.36-37
• /
• 2015

The purpose of this study is to investigate pozzolanic reactivity of the rice straw ash. This study focused on rice straw ash properties at various burning temperature and duration as a mineral admixture for mortar and concrete, and provide the crystalline state and molecular structure of rice straw ash. X.R.D and N.M.R were performed on rice straw ashes to identify pozzolanic reactivity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.753-756
• /
• 2006

This paper discussed pozzolanic reaction properties of classified fly ashes by using of electrostatic precipitator. Blaine values of fly ashes at hoppers are respectively about 3000(ordinary), 5000(fine) and 8000cm2/g(super-fine). The pozzolanic reactivity of fly ash at early stage and at later stage are respectively related to the related to the fineness and the glass content of fly ash. But the early hydration of cement was retarded by addition of super fine fly ashes. the adiabatic temperature rise of mortar containing fly ash is increased with the fineness of fly ashes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.162-163
• /
• 2015

A borosilicate glass was powdered to incorporation into the cement for the purpose of improving the neutron shielding performance of concrete. The particle size of the borosilicate glass powder was prepared by a similar to that of cement. 50×50×50mm size of cube specimens were measured a compressive strength. As a result, compressive strength of 10% borosilicate glass powder replaced specimens were improved than that of plain specimens.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.11-14
• /
• 1991

Apparent diffusion coefficients of Cl-ions through hardened cement paste(HCP), which were partly substituted blending materials, were determined. Also, pore solution was extracted from HCP which were immersed in NaCl solution, and Cl- concentration of the solution were analyzed. Partly substitution of pozzolanic materials considerably reduced the diffusion rate for Cl-ions and Cl- concentration of pore solution. Binding capacity of Cl- is related to the content of Al2O3 and pozzolanic reactivity.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.95-102
• /
• 2022

최근, 전세계적으로 온실 가스의 저감에 관심이 높아지면서 건설 산업에서도 FA를 대량 치환하는 HVFAC의 사용을 위한 연구가 수행되고 있다. 시멘트의 수화도와 FA 반응도의 정량적인 측정은 HVFAC의 강도발현 메커니즘을 명확히 이해할 수 있게 한다. FA가 포함된 시멘트 페이스트의 수화 및 포졸란 반응은 매우 복잡하고 수화 생성물의 조성을 정확하게 결정할 수 없으므로 간단한 방법으로 반응도를 설명하는 것은 매우 어렵다. 따라서, 이 연구는 재령에 따른 하이볼륨 FA 시멘트의 수화 특성을 조사하였다. 시멘트의 수화도와 FA의 반응도는 재령에 따른 선택용해법과 페이스트의 비증발 수량을 통해 평가하였다. 또한 HVFA 모르타르 시편을 이용하여 연령에 따른 압축강도를 측정하였다. 실험결과 FA의 치환율이 증가할수록 시멘트의 수화도는 증가하나 FA의 반응성은 감소하는 것으로 나타났다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.31.2-31
• /
• 2003

• 한국건축시공학회지
• /
• 제16권5호
• /
• pp.421-428
• /
• 2016

본 연구에서는 전기전도도 시험방법을 이용하여 다양한 산업부산물재료의 포졸란 반응성을 평가할 수 있는 대안을 제안하고자 하였다. 실험에 사용된 재료는 일반적으로 포졸란 재료로 활용되고 있는 산업부산물 플라이애시(class F, C) 2종, 실리카퓸(densified, undensified) 2종, 메타카올린과 포졸란 반응성이 정량적으로 증명되지 않은 산업부산물인 벤토나이트, 그라스울, 세라믹을 활용하여 포졸란 반응성을 측정 하였다. 각 재료가 $40^{\circ}C$ 포화수산화칼슘 수용액에 침지된 이후의 전기전도도의 변화를 관찰하였으며, $450{\sim}500^{\circ}C$에서 관찰된 수산화칼슘의 분해량을 통해 포졸란 반응성을 교차 검증하였다. 28일 압축강도 또한 포졸란 반응에 의한 역학적 성능의 개선여부를 검증하기 위해 활용되었다. 실험결과에 따르면, 전기전도도 최대값과 4시간후의 전기전도도의 차이를 활용하여 포졸란 반응성을 평가하는 것이 적절하다고 나타났다. 이러한 방법을 활용할 경우 수산화칼슘 함유량에 근거한 포졸란 반응성 평가와 매우 유사한 결과를 얻을 수 있었으며, 28일 압축강도 측정을 통해 얻은 결과와도 큰 차이를 보이지 않아, 전기전도도 시험법이 포졸란 반응성이 증명되지 않은 재료의 포졸란 반응성평가에도 충분히 활용될 수 있는 것으로 나타났다.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.241-255
• /
• 2017

Concrete is known to be the most used construction material worldwide. The environmental and economic aspects of Ordinary Portland Cement (OPC) containing concrete have led research studies to investigate the possibility of incorporating supplementary cementitious materials (SCMs) in concrete. Metakaolin (MK) is one SCM with high pozzolanic reactivity generated throughout the thermal activation of high purity kaolinite clay at a temperature ranging from $500^{\circ}C$ to $800^{\circ}C$. Although many studies have evaluated the effect of MK on mechanical properties of concrete and have reported positive effects, limited articles are considering the effect of MK on durability properties of concrete. Considering the lifetime assessment of concrete structures, the durability of concrete has become of particular interest recently. In the present work, the influences of MK on mechanical and durability properties of concrete mixtures are evaluated. Various experiments such as slump flow test, compressive strength, water permeability, freeze and thaw cycles, rapid chloride penetration and surface resistivity tests were carried out to determine mechanical and durability properties of concretes. Concretes made with the incorporation of MK revealed better mechanical and durability properties compared to control concretes due to combined pozzolanic reactivity and the filler effect of MK.