• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.721-729
• /
• 2012

Various methods control the influence of a covariate on a response variable. These methods are analysis of covariance(ANCOVA), RANK ANCOVA, ANOVA of (covariate-adjusted) residuals, and Kruskal-Wallis tests on residuals. Covariate-adjusted residuals are obtained from the overall regression line fit to the entire data set that ignore the treatment levels or factors. It is demonstrated that the methods on covariate-adjusted residuals are only appropriate when the regression lines are parallel and covariate means are equal for all treatments. In this paper, we proposed the new nonparametric method on the ANCOVA model, as applying joint placement in a one-way layout on residuals as described in Chung and Kim (2007). A Monte Carlo simulation study is adapted to compare the power of the proposed procedure with those of the previous procedure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.815-820
• /
• 1998

A new coding algorithm which has spectrum notches at the DC and Nyquist Frequency for maximizing the effect of the in-band pilot insertion in order to make the symbol timing or carrier recovery easy is proposed. It is shown that this algorithm uses one encoder and gives the similar spectrum characteristics to that of the existing OF00 code which uses two encoder. In this paper, the proposed new coding algorithm is explained andits spectrum characteristics is compared with the of OF00 code using computer simulation.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2556-2558
• /
• 2002

In this paper, the design guideline of communication interrace module for home-appliances is proposed. The requirements of the interface between white-goods and communication module are analyzed. Finally, the proposed interface structure is implemented using PLC technology.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2608-2610
• /
• 2002

본 논문에서는 최근 부각되고 있는 고속전력선 통신 해외 기술개발 동향을 조사 분석하였다. 전력선 통신 모뎀 칩�V 개발은 국내업체를 비롯하여 미국, 유럽, 일본을 중심으로 활발히 진행되어 현재 표준화와 함께 상품화가 활발히 진행중이다. 미국의 Homeplug, 유럽의 PLC forum 그리고 일본의 Echonet을 중심으로 표준화가 진행되고 있으며 각 단체의 리딩컴퍼니를 중심으로 칩�V의 상품화가 완료단계에 있다. 본 논문에서는 현재 해외의 표준화단체와 전력선통신 모뎀 칩�V 개발업체의 활동과 기술개발동향을 조사 분석하였다. 또한 CEBIT 2002에 출품된 제품을 중심으로 상품화 정도를 분석하고 시장동향과 앞으로의 기술개발 동향을 예측하였다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.23 no.2
• /
• pp.15-23
• /
• 2005

This analog communication system overcomes a limit of the digital communication that used an electric power line, and shows a strong characteristic by decrease of impedance along a load or surge-voltage and the same noise. this system is to detect an sound signal added to light through an photo-sensor and a filter circuit. And a signal detected in this way is transmitted to sound through a speaker of an earphone again.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.316-321
• /
• 2003

The railroad is a means of large transportation which has many talents such as a safety and a regularity. That is a results from various confidential performance tests and evaluations of the system. The railroad system consist of various subsystems - vehicle, power supply, signal, communications, track structures, operations, etc. Among them, as an item of safety evaluation there is a measurement of wheel/rail force, so called a measurement of derailment coefficient. This is a very important item because a derailment of a train will bring about a big accident. Especially it is more important in high speed rail of which operation speed is over two times as fast as existing rail. In this paper, it is introduced to preprocess the wheelset for measuring wheel/rail force of high speed rail, such as to treat a measuring wheelset, adhesion of strain gauges and static load test, running test result of main line.

• Electronics and Telecommunications Trends
• /
• v.19 no.1 s.85
• /
• pp.27-32
• /
• 2004

본 논문은 국내에 고속 전력선 통신을 도입하기 위한 국내외 관련 기술기준을 분석하였다. 전력선 통신은 상용 전력을 공급하는 전력선을 이용하여 데이터 통신을 수행한다. 전력선 통신은 전선 가설을 위한 비용이 필요 없고 최근에는 OFDM의 실용화 및 오류제어방식 고도화 등의 기술발전에 따라서 10Mbps 이상의 고속 데이터 전송이 상용화되었다. 따라서 고속의 인터넷 액세스와 가정내 LAN의 대체 수단으로 기대가 높아지고 있다. 그러나 이와 같은 고속 데이터 전송을 실현하기 위해서는 현행 제도에서 전력선 통신으로 사용되고 있는 주파수 대역보다도 높은 주파수대역이 필요하다. 수십 Mbps 정도의 전송속도를 실현하기 위해 필요한 사용주파수 대역은 구체적으로 2MHz에서 30MHz 대역을 추가하는 것이 반드시 필요하다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.967-973
• /
• 1997

In this paper, the designed and fabrication of a K-band push-push oscillator using miniaturized hairpin resonator have been presented. One experimenal oscillator has been designed and fabricated for K-band point-to-point operation. the miniaturized harpin resonator has been analyzed theoretically and simulated by MPIE(Mixed Potential Integral Equation) method. With this results, the analysis of hairpin resonator which coupled microstrip line has been carried out with transmission-mode using this results. an optimized output matching network for the suppression of the fundamental and the 3rd order harmonic was acquired by using a nonlinear analysis method. The fabricated oscillator shows the output power of -2.28dBm, the fundamental frequency suppression of -19dBc, the 3rd order harmonic suppressionof -24dBc and 0.33 percent effiiency at 22.8GHz. The experimental outputs are in good agreement with the theoretical and simulated results.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.6
• /
• pp.222-226
• /
• 2009

The objective of this study is to share multimedia contents included in existing digital devices and to solve the problems of an increase in installation fees and non-environmentally friendly interiors. This study designed a new digital signal transmitter and receiver using power line transmission and HDMI in order to solve the problems in the existing systems. The transmitter and receiver designed in this study used an AD9867BCPZ PLC chip in which the transmission came from digital signals originating in a PC, and the system architecture was configured so that the outputs signals were connected to a TV from the receiver. The experiment was implemented by adding a Video Test Generator, a USBPre external sound card, and Smaart Live 6 for analyzing the characteristics of the configured system. In the video test results, it was verified that communication was actively implemented, and the image quality showed a constant level from the measurement of the captured video. In the case of the sound, it was verified that more than 90% of the sound signals were normally transmitted and received from the examination of their phases and magnitudes. Thus, the performance of the system designed in this study was verified, which leads to the resolution of some of the problems found in current digital devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1433-1443
• /
• 2004

The power line modem proposed in this paper transmits the remote control signal using CSK(Code Shift Keying) and DS/SS method. The CSK technique provides the increased capacity of transmission and robustness towards noise. Besides, the DS/SS technique provides protection against narrow-band Gaussian interference and multi-path interference. The modem supports full-duplex communication using FDD(Frequency Division Duplex) and the modem structure for forward link is same with that for reverse link. To switch each sub-controlled unit smoothly, 4/$\pi$-DQPSK is adopted for noncoherent demodulation. The PN code for spreading spectrum seues to divide each group which consists of sub-controlled units and Walsh code is used for the M-ary CSK technique. Each block is designed and verified with TMS320C5402 DSP. We show the superiority of the proposed method by analyzing numerically the system performance for the factors of the DS/SS and CSK method ullder additive white Gaussian noise and PBI.