• 제목/요약/키워드: power-law function

검색결과 281건 처리시간 0.032초

CKGS: A Way Of Compressed Key Guessing Space to Reduce Ghost Peaks

  • Li, Di;Li, Lang;Ou, Yu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권3호
    • /
    • pp.1047-1062
    • /
    • 2022
  • Differential power analysis (DPA) is disturbed by ghost peaks. There is a phenomenon that the mean absolute difference (MAD) value of the wrong key is higher than the correct key. We propose a compressed key guessing space (CKGS) scheme to solve this problem and analyze the AES algorithm. The DPA based on this scheme is named CKGS-DPA. Unlike traditional DPA, the CKGS-DPA uses two power leakage points for a combined attack. The first power leakage point is used to determine the key candidate interval, and the second is used for the final attack. First, we study the law of MAD values distribution when the attack point is AddRoundKey and explain why this point is not suitable for DPA. According to this law, we modify the selection function to change the distribution of MAD values. Then a key-related value screening algorithm is proposed to obtain key information. Finally, we construct two key candidate intervals of size 16 and reduce the key guessing space of the SubBytes attack from 256 to 32. Simulation experimental results show that CKGS-DPA reduces the power traces demand by 25% compared with DPA. Experiments performed on the ASCAD dataset show that CKGS-DPA reduces the power traces demand by at least 41% compared with DPA.

비국소 탄성이론을 이용한 S형상 점진기능재료 나노-스케일 판의 이축 좌굴해석 (Biaxial buckling analysis of sigmoid functionally graded material nano-scale plates using the nonlocal elaticity theory)

  • 이원홍;한성천
    • 한국산학기술학회논문지
    • /
    • 제14권11호
    • /
    • pp.5930-5938
    • /
    • 2013
  • Erigen의 비국소 탄성이론을 이용한 S형상 점진기능재료 나노-스케일 판의 전단변형이론을 정식화하여 평형방성식을 유도하였다. 비국소 탄성이론은 미소 규모 효과를 고려할 수 있고 S형상함수는 점진기능재료의 정확한 특성 변화를 고려할 수 있다. 4변이 단순지지된 나노-스케일 판의 지배방정식을 풀기 위해 Navier 방법을 사용하였다. 거듭 제곱 지수와 비국소 변수의 효과를 나타내기 위한 나노-스케일 판의 해석적 좌굴하중을 제시하였고, 국소 탄성이론과의 관계를 수치해석 결과를 통하여 고찰하였다. 또한 (i) 거듭제곱 지수, (ii) 나노-스케일 판의 크기, (iii) 비국소 계수, (iv) 형상비 그리고 (v) 모드 수 등이 나노-스케일 판의 이축 무차원 좌굴하중에 미치는 효과에 대하여 관찰하였다. 본 연구의 결과를 검증하기 위해 참고문헌의 결과들과 비교 분석하였다.

TOPMODEL 투수량계수 감소함수 일반화과정의 적용에 관한 연구 (Application of Generalized Transmissivity Decreasing Function in TOPMODEL Operation)

  • 정선희;김상현
    • 한국수자원학회논문집
    • /
    • 제32권6호
    • /
    • pp.637-647
    • /
    • 1999
  • 본 연구는 토양내에서 투수량 계수가 연직방향으로 지수함수적으로 감소한다는 TOPMODEL의 기존 가정을 일반화시킨 투수량계수의 멱급수형 감소모형의 국내지형에 대한 적용성을 검토하였다. 유출모의는 위천 대표 시험 유역의 동곡 소유역(33.6km2)을 대상으로 50m 수치지형도(Digital Elevation Model : DEM)을 사용하였다. 임의의 매개변수 결정의 신뢰성을 확보하기위해 TOPMODEL 운영시 산정과정에 난수발생 알고리즘을 추가하여 변형된 모형의 효율성을 검토하였다. TOPMODEL 투수량계수 멱급수 감소모형의 멱급수 2와 3의 경우가 다름 멱급수들의 경우나 투수량계수 지수형 감소모형에 비해서 상대적으로 높은 모의 효율을 보였다. 이러한 결과는 유출수문곡선의 감쇠곡선 부분 추정에 있어 멱급수 2와 3인 감소모형의 모의능력이 다른 모형들에 비해서 대상유역의 토양특성을 잘 반영하는데 기인한다고 판단된다.

  • PDF

Shear correction factors of a new exponential functionally graded porous beams

  • Mohammed Sid Ahmed Houari;Aicha Bessaim;Tarek Merzouki;AhmedAmine Daikh;Aman Garg;Abdelouahed Tounsi;Mohamed A. Eltaher;Mohamed-Ouejdi Belarbi
    • Structural Engineering and Mechanics
    • /
    • 제89권1호
    • /
    • pp.1-11
    • /
    • 2024
  • This article introduces a novel analytical model for examining the impact of porosity on shear correction factors (SCFs) in functionally graded porous beams (FGPB). The study employs uneven and logarithmic-uneven modified porosity-dependent power-law functions, which are distributed throughout the thickness of the FGP beams. Additionally, a modified exponential-power law function is used to estimate the effective mechanical properties of functionally graded porous beams. The correction factor plays a crucial role in this analysis as it appears as a coefficient in the expression for the transverse shear stress resultant. It compensatesfor the assumption that the shear strain is uniform across the depth of the cross-section. By applying the energy equivalence principle, a general expression for static SCFs in FGPBs is derived. The resulting expression aligns with the findings obtained from Reissner's analysis, particularly when transitioning from the two-dimensional case (plate) to the one-dimensional case (beam). The article presents a convenient algebraic form of the solution and provides new case studies to demonstrate the practicality of the proposed formulation. Numerical results are also presented to illustrate the influence of porosity distribution on SCFs for different types of FGPBs. Furthermore, the article validates the numerical consistency of the mechanical property changesin FG beams without porosity and the SCF by comparing them with available results.

Longitudinal Spacing Control of Vehicles in a Platoon

  • No, Tae-Soo;Chong, Kil-To
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제2권2호
    • /
    • pp.92-97
    • /
    • 2000
  • The Lyapunov stability theorem is used to derive a control law that can be used to control the spacing between vehicles in a platoon. A third order system is adopted to model the vehicle and power-train dynamics. In addition, the concept of

  • PDF

에너지함수를 이용한 STATCON의 제동특성 해석 (Damping Analysis of STATCON based on Energy Function)

  • 설용태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 D
    • /
    • pp.1121-1123
    • /
    • 1997
  • The control strategy for damping analysis of STATCON is derived based on an energy function of the power system equation. The center-of-angle(COA) coordinated system by a simple equivalent physical system is used and the control law for this system is induced for FACTS devices as TCSC and STATCON. Damping results from the transient performance simulations carried out on the model system.

  • PDF

A simple analytical approach for thermal buckling of thick functionally graded sandwich plates

  • El-Haina, Fouzia;Bakora, Ahmed;Bousahla, Abdelmoumen Anis;Tounsi, Abdelouahed;Mahmoud, S.R.
    • Structural Engineering and Mechanics
    • /
    • 제63권5호
    • /
    • pp.585-595
    • /
    • 2017
  • This study aimed to presents a simple analytical approach to investigate the thermal buckling behavior of thick functionally graded sandwich by employing both the sinusoidal shear deformation theory and stress function. The material properties of the sandwich plate faces are continuously varied within the plate thickness according to a simple power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic material. The thermal loads are considered as uniform, linear and non-linear temperature rises across the thickness direction. Numerical examples are presented to prove the effect of power law index, loading type and functionally graded layers thickness on the thermal buckling response of thick functionally graded sandwich.

비선형 마찰을 고려한 유압비례제어 시스템의 적응 이산시간 슬라이딩모드 추적 제어기 설계 (Design of Adaptive Discrete Time Sliding-Mode Tracking Controller for a Hydraulic Proportional Control System Considering Nonlinear Friction)

  • 박형배
    • 동력기계공학회지
    • /
    • 제9권4호
    • /
    • pp.175-180
    • /
    • 2005
  • Incorrections between model and plant are parameter, system order uncertainties and modeling error due to disturbance like friction. Therefore to achieve a good tracking performance, adaptive discrete time sliding mode tracking controller is used under time-varying desired position. Based on the diophantine equation, a new discrete time sliding function is defined and utilized for the control law. Robustness is increased by using both a recursive least-square method and a sliding function-based nonlinear feedback. The effectiveness of the proposed control algorithm is proved by the results of simulation and experiment.

  • PDF

고분자 유동의 3차원 해석을 위한 새로운 검사 체적 유한 요소법 (A New Control Volume Finite Element Method for Three Dimensional Analysis of Polymer Flow)

  • 이석원;윤재륜
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2003년도 춘계학술대회논문집
    • /
    • pp.461-464
    • /
    • 2003
  • A new control volume finite element method is proposed for three dimensional analysis of polymer flow. Tetrahedral finite element is employed and co-located interpolation procedure for pressure and velocity is implemented. Inclusion of pressure gradient term in the velocity shape functions prevents the checkerboard pressure field from being developed. Vectorial nature of pressure gradient is considered in the velocity shape function so that velocity profile in the limit of very small Reynolds number becomes physically meaningful. The proposed method was verified through three dimensional simulation of pipe flow problem for Newtonian and power-law fluid. Calculated pressure and velocity field showed an excellent agreement with analytic solutions for pressure and velocity. Driven-cavity problem, which is reported to yield checkerboard pressure filed when conventional finite element method is applied, could be solved without yielding checkerboard pressure field when the proposed control volume finite element method was applied. The proposed method could be successfully applied to the three dimensional mold filling problem.

  • PDF

Magneto-thermo-elastic analysis of a functionally graded conical shell

  • Mehditabar, A.;Alashti, R. Akbari;Pashaei, M.H.
    • Steel and Composite Structures
    • /
    • 제16권1호
    • /
    • pp.77-96
    • /
    • 2014
  • In this paper, magneto-thermo-elastic problem of a thick truncated conical shell immersed in a uniform magnetic field and subjected to internal pressure is investigated. Material properties of the shell including the elastic modulus, magnetic permeability, coefficients of thermal expansion and conduction are assumed to be isotropic and graded through the thickness obeying the simple power law distribution, while the poison's ratio is assumed to be constant. The temperature distribution is assumed to be a function of the thickness direction. Governing equations of the truncated conical shell are derived in terms of components of displacement and thermal fields and discretised with the help of differential quadrature (DQ) method. Results are obtained for different values of power law index of material properties and effects of thermal load on displacement, stress, temperature and magnetic fields are studied. Results of the present method are compared with those of the finite element method.