• 한국가스학회지
• /
• 제16권2호
• /
• pp.38-44
• /
• 2012

근래 들어 강화되는 배출가스 규제에 대응하기 위한 대책으로 LPG 차량에 적용되고 있는 제3세대 LPG 연료공급방식인 LPi(Liquid phase LPG injection)는 펌프를 이용해서 고압의 액상연료를 공급하는 것이 가장 핵심적인 기술이다. LPi 시스템은 액상연료분사의 전자식 정밀제어를 통해 출력이 상승하고 유해배출가스가 현저하게 저감되는 장점이 있으나, 가장 핵심적인 부품인 연료펌프 및 인젝터의 경우 대부분 수입에 의존하고 있어 시스템 설계에 유연하지 못하다. 본 연구에서는 인젝터의 국산화 개발을 위해 LPi 시스템에 적합한 연료공급방법의 인젝터 디자인 및 최적의 작동조건 확보를 목표로 LPi용 인젝터의 설계 및 시작품을 제작하여 누설 및 유량특성을 살펴보았다.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4298-4307
• /
• 2015

최근 콘크리트 구조물의 내구성 저하에 따른 성능저하로 유지 보수나 보강등에 상당한 비용이 증가함에 따라 콘크리트의 고유 특성인 균열 저감에 대한 연구가 필요한 실정이다. 특히 장기간 운영에 따른 지하 전력구의 노후화로 유지 보수에 어려움이 상존함에 따라 전력구 설계단계에서 균열을 획기적으로 저감할 수 있는 저수축 콘크리트용 수축저감제 기술 개발이 필요하다. 본 연구는 콘크리트 구조물의 내구성 저하에 따른 균열을 방지하고자 균열을 획기적으로 저감할 수 있는 저수축 콘크리트를 개발하기 위한 것으로 수축저감 물질을 선정하고 모르타르 및 콘크리트 특성을 검토한 결과 클리콜계의 경우 압축강도 특성 및 건조수축 길이변화 실험결과에서 우수한 것으로 나타나 수축저감제로서의 가능성을 확인하였다. 추후 수축저감제의 범용적인 적용성 검토를 위하여 수축저감제의 사용량 및 사용재료 변화 등에 대한 다양한 재료변수 요인 검토를 통하여 수축저감제의 성능 검토가 필요할 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.110-114
• /
• 2021

In this study, we fabricated light-weight solar module for various applications such as building integrated photovoltaics (BIPV), vehicles, trains, etc. Ethylene tetra fluoro ethylene (ETFE) film was applied as a material to replace the cover glass, which occupies more than 65% of the weight of the PV module. Glass fiber reinforced plastic (GRP) was applied to the ones with a low durability by replacing the cover glass to ETFE. Moreover, to achieve a high solar power conversion in this study, we applied a shingled design to weight reduced solar modules. The shingled module with GRP shows 183.7 W of solar-to-power conversion, and the output reduction rate after weight load test was 1.14%.

• Composites Research
• /
• 제34권6호
• /
• pp.380-386
• /
• 2021

본 연구에서는 탄소섬유 강화 복합재료를 적용하여 PTO 샤프트의 임계 속도를 향상시키는 연구를 진행하였다. 탄소섬유 강화 복합재료의 경우 전단 강도가 낮은 단점이 있어, 이를 보완하기 위해 티타늄-탄소섬유 강화 복합재료 하이브리드 구조로 설계하는 것을 제안하였다. PTO 샤프트에서 요구하는 최대 허용 토크, 임계 속도, 비틀림 고유진동수 기준을 충족시키는 최적의 구조를 설계하고 제작하였다. 제작한 PTO 샤프트의 성능 평가를 위해 진동 시험, 정적 비틀림 시험, 비틀림 내구성 시험이 수행되었고, 진동 시험에서 PTO 샤프트의 임계 속도는 20570 rpm로 티타늄 샤프트 대비하여 7.5% 향상된 것을 확인하였다. 또한 정적 비틀림 시험을 통해 PTO 샤프트의 최대 허용 토크가 2300 N·m로 해당 기준을 충족시키는 것을 확인하였다. 최종적으로 11.3~113 N·m 범위의 하중을 반복하는 비틀림 내구성 시험에서도 10⁶ 사이클 동안 피로파괴가 발생하지 않는 것으로 평가되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.438-439
• /
• 2006

Porcelain insulators have generally been used in Korea to insulate a transmission line from the tower, and a highly polymerized compound polymer insulator which has superior stain proof characteristics, has also been used widely. Currently, a worker rides on the suspension insulator string for installation on towers and conductors but in case of polymer insulators, this will pollute and scratch the housing result in durability reduction by deterioration and corona. This study developed a high strength aluminum compound metal lauder designed to work on polymer insulators without riding, and a clamp type connecting device and safety gear for easy installation on the tower and conductor. These polymer insulator work device can be used for 154kV and 345kV polymer insulators through a strength and load test to secure safety. This paper presents field usage.

• 풍력에너지저널
• /
• 제10권4호
• /
• pp.20-27
• /
• 2019

High-speed shaft coupling in a wind power system transmits power and absorbs variations in length and spindle dislocation between the gearbox and generator. Furthermore, the coupling has an insulation function that prevents electrical corrosion caused by the flow of the generator's current into the gearbox and prevents overload resulting from sudden power failure from being transferred to the gearbox. Its design, functions, and part verification are described in the IEC61400 and GL Guidelines, which specify that the part must have a durability life of 20 years or longer under distance variation and axial misalignment between the gearbox and the generator. This study presents the design of a high-speed coupling through composite stiffness calculation, structural analysis, and comparative analysis of test and theory to identify the characteristics of high-speed coupling for a large-capacity 6 MW wind power generator. A prototype was fabricated by optimizing the manufacturing process for each part based on the design, and the reliability of the fabricated prototype was verified by evaluating the performance of the target quantitative evaluation items.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.50-56
• /
• 2005

The mechanical properties of glass fiber reinforced polymer reinforcing bars(rebar) in various environment conditions such as moisture, chloride, alkali and freeze-thaw actions at temperature ranging from room temperature($25^{\circ}C$) to high temperature of up to $80^{\circ}C$ have been studied. The test results indicated that tensile strength and interfacial shear strength of GFRP bar were decreased with the increasing of temperature and holding time of each environment condition. The degradation in alkali environment. was more serious than those in the other environments.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.29-34
• /
• 2014

Cooling the in-wheel motor in electric vehicles is critical to its performance and durability. In this study, thermal flow analysis was conducted by evaluating the thermal performance of two conventional cooling models for in-wheel motors under the continuous rating base speed condition. For conventional model #1, in which cooling oil was stagnant in the lower end of the motor, the maximum temperature of the coil was $221.7^{\circ}C$; for conventional model #2, in which cooling oil was circulated through the exit and entrance of the housing and jig, the maximum temperature of the coil was $155.4^{\circ}C$. Therefore, both models proved unsuitable for in-wheel motors since the motor control specifications limited the maximum temperature to $150^{\circ}C$.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.735-742
• /
• 2001

This paper reports on the dynamics and friction characteristics of piston skirt with consideration of mixed lubrication. Piston skirt is an important part of the engine that transforms fuel into mechanical energy. The durability and low friction characteristics are important recent issues in piston skirt design. In this paper, the piston skirt motion is analyzed with consideration of mixed lubrication and piston skirt tilting motion. The entire trajectory of piston motion is obtained by using transient numerical method. Also various parameter studies are performed for piston skirt design and the development of lower frictional engine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.123-128
• /
• 1998

Currently the study on the effective use of the fly ash is concentrated as construction materials, which is by product of electric power generating plants. Fly ash, therefore, can be used as concrete admixture for the purpose of not only increasing the concrete quality but also of utilizing materials. Within the country it is not easy to use fly ash for the construction purpose because the properties of fly ash are varied due to the use of different raw ores in the various power plants. And little previous construction experiments and the basic experiments about the formation of bubbles are performed. In this study the water-cement ratio is varied in 3 different values and compressive strength is measured and freeze-thaw experiments are preformed to establish the relationships between water-cement ratios and the durability. And also for each batch of different water-cement ratio fly ash is substituted 10%, 20% and 30% of cement and concrete mixture the admixture and the formation of bubbles and also freeze-thaw resistance.