• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1119-1129
• /
• 2014

This study proposes a novel five-level three-phase hybrid-clamped converter composed of only six switches and one flying capacitor (FC) per phase. The capacitor-voltage-drift phenomenon of the converter under the classical sinusoidal pulse width modulation (SPWM) strategy is comprehensively analyzed. The average current, which flows into the FC, is a function of power factor and modulation index and does not remain at zero. Thus, a specific modulation strategy based on space vector modulation (SVM) is developed to balance the voltage of DC-link and FCs by injecting a common-mode voltage. This strategy applies the five-segment method to synthesize the voltage vector, such that switching losses are reduced while optional vector sequences are increased. The best vector sequence is then selected on the basis of the minimized cost function to suppress the divergence of the capacitor voltage. This study further proposes a startup method that charges the DC-link and FCs without any additional circuits. Simulation and experimental results verify the validity of the proposed converter, modulation strategy, and precharge method.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.79-86
• /
• 1994

Gain-guided broad-area single quantum well separate confinement heterostructure diode lasers have been fabricated from structures grown by metal organic vapor phase epitaxy. The active layer of the epi-structure is InGaAs emitting 962-965nm and the guiding layer GaAs. The channel width is fixed to 150${\mu}$m and the cavity length varys within the range of 300~800${\mu}$m. For uncoated LD's, the output power of 0.7W has been obtaained at a pulsed current level of 2A, which results about 60% external quantum efficiency. The threshold current density is 200A/cm$^{2}$ for the cavity lengths of 800.mu.m LD's. The stain effect upon the transparent current density has been observed. The internal quantum efficiency is expected to be 88% and the internal loss to be 18$cm^{-1}$. The beam divergence has been measured to be 7$^{\circ}$to lateral and 40$^{\circ}$to transverse direction. finally, 1.2W continuous-wave output power has been obtained at a current level of 2A for AR/HR coated LD's die-bonded on Cu heat-sink and cooled by TEC.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.297-304
• /
• 2017

The purpose of this paper is to analyze losses because of switching devices and the secondary side circuit diodes of 500 W full bridge dc-dc converter by applying gallium nitride (GaN) field-effect transistor (FET), which is one of the wide band gap devices. For the detailed device analysis, we translate the specific resistance relation caused by the GaN FET material property into algebraic expression, and investigate the influence of the GaN FET structure and characteristic on efficiency and system specifications. In addition, we mathematically compare the diode rectifier circuit loss, which is a full bridge dc-dc converter secondary side circuit, with the synchronous rectifier circuit loss using silicon metal-oxide semiconductor (Si MOSFET) or GaN FET, which produce the full bridge dc-dc converter analytical value validity to derive the final efficiency and loss. We also design the heat sink based on the mathematically derived loss value, and suggest the heat sink size by purpose and the heat divergence degree through simulation.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.25-33
• /
• 2001

To determine the pin power distribution without disassembling, HANARO fuel assemblies are gamma-scanned and then the distribution is reconstructed tv using the tomography method. The iterative least squares method (ILSM and the wavelet singular value decomposition method (WSVD) are chosen to solve the problem. An optimal convergence criterion is used to stop the iteration algorithm to overcome the potential divergence in ILSM. WSVD gives better results than ILSM , and the average values from the two methods give the best results. The RMSE (root mean square errors) to the reference data are 5.1, 6.6, 5.0, 6.5, and 6.4% and the maximum relative errors are 10.2, 13.7, 12.2, 13.6, and 14.3%, respectively. It is found that the effect of random positions of the pins is important. Although the effect can be accommodated by the iterative calculations simulating the random positions, the use of experimental equipment with a slit covering the whole range of the assembly horizontally is recommended to obtain more accurate results. We made a new apparatus using the results of this study and are conducting an experiment in order to obtain more accurate results.

• Journal of Astronomy and Space Sciences
• /
• 제37권4호
• /
• pp.219-228
• /
• 2020

A CubeSat platform has become a popular choice due to inexpensive commercial off-the-shelf (COTS) components and low launch cost. However, it requires more power-efficient and higher-data rate downlink capability for space applications related to remote sensing. In addition, the platform is limited by the size, weight and power (SWaP) constraints as well as the regulatory issue of licensing the radio frequency (RF) spectrum. The requirements and limitations have put optical communications on promising alternatives to RF communications for a CubeSat platform, owing to the power efficiency and high data rate as well as the license free spectrum. In this study, we analyzed the performance of optical downlink communications compatible with CubeSat platforms in terms of data rate, bit error rate (BER) and outage probability. Mathematical models of BER and outage probability were derived based on not only the log-normal model of atmospheric turbulence but also a transmitter with a finite extinction ratio. Given the fixed slot width, the optimal guard time and modulation orders were chosen to achieve the target data rate. And the two performance metrics, BER and outage data rate, were analyzed and discussed with respect to beam divergence angle, scintillation index and zenith angle.

• 패션비즈니스
• /
• 제14권5호
• /
• pp.78-92
• /
• 2010

The culture phenomenon, which the desire of self expression is noticeable and the diversity of gender identity is widely accepted, simply makes a difference in the lifestyle of one human being rather than the dichotomous classification of male and female. Now, the delicate and aesthetic sensitivity classified as the feminine characteristics is no longer the exclusive property of female and this refers to substituting it as a social gender from the concept of biological sex. This phenomenon has influenced on the male culture and is creating various codes according to the cultural gender extended from the gender as a social role. Also, the transition into the western lifestyle has extended the aesthetic emotion to accommodate new codes from the diversification and globalization of lifestyle. The mansumer power, which does not care too much about the money for the emotionally attached items, has enabled various fashion styles. After analyzing the diversified clothing behavior conducted by these people in connection with the social phenomenon, First, this shows the phenomenon of emotional value pursuit that finds pleasure over the clothing as the item of augmented reality is added to the concept of play, in which the real space referred to as garment and virtual space of playing the rock, paper and scissors game meet together within the augmented reality. Second, the convergence concept has enabled the coordination of new style by obscuring the area of design concept and this refers to the changes in design from the development of new items and transformation into double-style details. Third, the divergence that intensively provides specific use/convenience and specialized value shows a change in the fashion market from the phenomenon that admits various gene rations of culture and specifically, takes differently about the recognition of middle-aged males. Fourth, the variety seeking tendency receives attention as the value of future design together with the phenomenon of discriminative value pursuit. In the male fashion, it is linked to the collaboration with the design area and this tells that the fashion with the narcissistic cross-dressing and motto of neutral gender without being sided to male/female is rising.

• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.438-443
• /
• 1991

각확산도가 작은 $He^+$ 이온빔 인출전류를 최대로 얻기 위하여 Duoplasmatron 이온원의 동작특성을 조사하였다. 이온원의 기체압력, 아크전류. 전자석 전류, 인출전압등을 변화시키면서 인출되는 $He^+$ 이온빔 전류의 변화를 관찰하였다. 열음극으로는 Ni망위에 BaO와 SrO의 혼합물을 코팅한 산화물 필라멘트를 사용하였으며, 그것의 평균수명은 약 100시간이었다. 인출전류는 아크전류에 선형적으로 비례했다 이온원 전자석전류를 증가시킴에 따라 인출전류는 증가하였지만 빔의 각확산도가 커졌다. 최대의 인출전류는 0.084 Torr의 이온원 압력에서 얻어졌다. 인출전류는 이론에서와 마찬가지로 인출전압의 3/2승에 비례하였다. 5.72 kV의 인출전압에서는 최적인출조건하에서 50 $\mu$A의 인출전류가 얻어졌다.

• 한국응용곤충학회지
• /
• 제39권1호
• /
• pp.43-52
• /
• 2000

국내 4개 지역으로부터 채집된 배추좀나방(Plutella xylostella)의 미토콘드리아 DNA중 COI 유전자 일부 (438 bp)의 염기서열을 결정, 유전적 다양도 및 유전자 이동정도를 파악함으로써 집단 유전적 구조 및 특성에 대하여 연구하였다. 총 21개체로부터 13개의 mtDNA haplotype을 얻었으며 이들의 변이는 0.3~1.4%로 다른 곤충을 대상으로 한 유사연구와 비슷한 크기를 나타내었으며 haplotype 다양도는 매우 높았다(평균 h=0.81). 지리적으로 먼 제주도의 개체군과 경남 김해 두 지역(11km 거리)의 개체군을 비교한 결과, 통계적으로 유의한 정도의 유전적 격리(p<0.05%)는 전혀 관찰되지 않았으며, 대신 상당한 정도의 세대당 암컷 이동률(Nm=2-30)을 보였다. 또한 GenBank에 등록된 하와이의 배추좀나방 haplotype은 본 연구에서 얻은 것들과 유전적으로 흡사하였다. 종합적으로, 국내 배추좀나방은 전체적으로는 많은 haplotype수에 기인한 적절한 크기의 유전적 분화율을 보유하고 있으며 국지적으로는 상당한 이동력에 의한 장거리 이동으로 개체군내 높은 haplotype 다양도를 보이며 동시에 지역간의 유전적 유사성을 나타낸다고 요약되었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.49-54
• /
• 2016

Regarding global and local factors of a set of features, a given single image or multiple images is a common approach in image processing. This paper introduces an application of an adaptive version of non-local filter whose original version searches non-local similarity for removing noise. Since most images involve texture partner in both foreground and background, extraction of signified regions with texture is a challenging task. Aiming to the detection of visual attention regions for images with texture, we present the contrast analysis of image patches located in a whole image but not nearby with assistance of the adaptive filter for estimation of non-local divergence. The method allows extraction of signified regions with texture of images of wild life. Experimental results for a benchmark demonstrate the ability of the proposed method to deal with the mentioned challenge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.69-71
• /
• 2003

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.