• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• 한국정보과학회논문지:정보통신
• /
• 제33권5호
• /
• pp.395-406
• /
• 2006

Ad hoc 네트워크에서 노드의 한정된 배터리 잔량 에너지는 전체 네트워크의 수명에 큰 영향을 끼친다. 따라서 이러한 에너지 한계를 극복하기 위해 다양한 power-aware 라우팅 프로토콜들이 네트워크 계층에서 제안되어 왔으며, 이들 power-aware 라우팅 프로토콜들은 기본적으로 노드의 배터리 잔량에너지와 전송 전력량을 경로 탐색 과정에서 반영한다. 본 논문에서 제안하는 power-aware 라우팅 프로토콜 TDPR(Traffic load & lifetime Deviation based Power-aware Routing protocol)은 노드의 배터리 잔량 에너지와 전송 전력량뿐만 아니라 각 노드의 트래픽 부하와 노드 간 예상 수명 편차를 경로 탐색 과정에 반영하여 전체 네트워크의 수명을 연장시키고 노드들 간 에너지 소모가 균등하게 이루어질 수 있도록 한다. ns-2[14] 시뮬레이터를 이용한 TDPR과 기존 라우팅 프로토콜들 간의 비교 실험은 전체 네트워크의 부하 균등, 노드들의 에너지 소모량, 그리고 개설 경로의 안정성 측면에서 TDPR의 개선된 성능을 확인한다. 실험 결과, 네트워크 탈퇴한 노드의 개수 비교에서는 TDPR이 AODV(4)보다 최대 72%, PSR[9]보다 최대 58% 적게 나타났다. 평균 잔량 에너지의 비교에서는 TDPR이 AODV보다 최대 29%, PSR보다 최대 15% 적은 양의 에너지를 소모하는 것을 확인하였으며, 에러 메시지의 발송 횟수 비교에서는 TDPR이 AODV보다 최대 41%, PSR보다는 최대 38% 적은 수의 에러 메시지를 발송하는 것을 확인할 수 있었다.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.49-54
• /
• 2005

With the recent advances in Micro Electro Mechanical System (MEMS) technology, low cost and low power consumption wireless micro sensor nodes have become available. However, energy-efficient routing is one of the most important key technologies in wireless sensor networks as sensor nodes are highly energy-constrained. Therefore, many researchers have proposed routing protocols for sensor networks, especially cluster-based routing protocols, which have many advantages such as reduced control messages, bandwidth re-usability, and improved power control. Some protocols use information on the locations of sensor nodes to construct clusters efficiently. However, it is rare that all sensor nodes know their positions. In this article, we propose another cluster-based routing protocol for sensor networks. This protocol does not use information concerning the locations of sensor nodes, but uses the remaining energy of sensor networks and the desirable number of cluster heads according to the circumstances of the sensor networks. From performance simulation, we found that the proposed protocol shows better performance than the low-energy adaptive clustering hierarchy (LEACH).

• 대한전자공학회논문지TC
• /
• 제45권7호
• /
• pp.62-66
• /
• 2008

본 논문에서는 무선 ad hoc 네트워크를 위한 위치정보 기반 에너지 고려 라우팅 프로토콜을 제안한다. 기존의 Greedy Perimeter Stateless Routing(GPSR)에서는 특정 노드에 트래픽이 부과되어 그 노드의 배터리 소모가 커지는 문제와 void 상황에 대하 문제점이 있다. 이를 해결하기 위한 방안으로 본 논문에서 제안한 Power Aware Greedy Perimeter Stateless Routing(PAGPSR) 프로토콜은 목적지까지 경로 설정 시 에너지 정보와 위치기반 정보를 기반으로 경로를 설정하여 기존 GPSR에서의 문제점을 해결하였다. 본 논문은 다음 홉을 설정할 때에 두 가지 사항 즉, 에너지 잔량과 목적지까지의 거리를 고려하여 다음 홉을 설정하게 되고 void 상황에 직면하였을 때에 제안하는 Limited-Flooding 방식을 택하여 다음 홉을 설정한다. 제안한 프로토콜의 성능을 평가하기 위하여 본 논문에서는 ns-2를 사용하였으며, 성능 분석을 통해 GPSR과 비교하여 네트워크 수명이 향상된 것을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.50-67
• /
• 2015

The Cognitive Radio (CR) paradigm in tactical ad hoc networks is an important element of future military communications for network-centric warfare. This paper presents a novel Cognitive Link State Routing protocol for CR-based tactical ad hoc networks. The proposed scheme provides prompt and reliable routes for Primary User (PU) activity through procedures that incorporate two main functions: PU-aware power adaptation and channel switching. For the PU-aware power adaptation, closer multipoint relay nodes are selected to prevent network partition and ensure successful PU communication. The PU-aware channel switching is proactively conducted using control messages to switch to a new available channel based on a common channel list. Our simulation study based on the ns-3 simulator demonstrates that the proposed routing scheme delivers significantly improved performance in terms of average end-to-end delay, jitter, and packet delivery ratio.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.504-527
• /
• 2015

Underwater wireless sensor networks (UWSNs) are similar to the terrestrial sensor networks. Nevertheless, there are different characteristics among them such as low battery power, limited bandwidth and high variable propagation delay. One of the common major problems in UWSNs is determining an efficient and reliable routing between the source node and the destination node. Therefore, researchers tend to design efficient protocols with consideration of the different characteristics of underwater communication. Furthermore, many routing protocols have been proposed and these protocols may be classified as location-based and location-free routing protocols. Pressure-based routing protocols are a subcategory of the location-free routing protocols. This paper focuses on reviewing the pressure-based routing protocols that may further be classified into non-void avoidance protocols and void avoidance protocols. Moreover, non-void avoidance protocols have been classified into single factor based and multi factor based routing protocols. Finally, this paper provides a comparison between these protocols based on their features, performance and simulation parameters and the paper concludes with some future works on which further study can be conducted.

• 한국멀티미디어학회논문지
• /
• 제8권8호
• /
• pp.1108-1118
• /
• 2005

Ad Hoc 네트워크는 무선접속을 사용하는 이동 노드들이 중앙관리 없이 구성되는 네트워크이다. Ad Hoc 네트워크의 노드는 제한된 전원을 가지며, 따라서 효율적으로 에너지를 사용하는 라우팅 방식에 대한 연구가 필요하다. 기존의 석유 에너지 기반 라우팅은 특정 노드의 과도한 에너지 소모에 따른 노드들간의 공정성, 네트워크 전체의 과도한 에너지 소비 등의 문제점을 가지고 있다. 본 논문에서는 기존의 문제점을 개선할 수 있는 Clustering Based Energy-Aware Routing (CBEAR) 방식을 제안하였다. 성능분석 결과 제안된 방식은 노드의 생존성을 유지하면서 노드들간의 공정성과 네트워크 전체의 에너지 효율성을 개선함을 확인하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.177-180
• /
• 2011

In practice, it is well known that geographical and/or location based routing is highly effective for wireless sensor network. Here, electing some landmarks on the network and forwarding data based on the landmark is one of the good approaches for a vast sensing field with holes. In the most previous works, landmarks are elected without considering the residual energy on each sensor. In this paper, we propose an Energy aware Landmark Election and Routing (ELER) protocol to establish a stable routing paths and reduce the total power consumption. The proposed protocol makes use of each sensor's energy level on electing the landmarks, which would be utilized to route a packet towards the target region using greedy forwarding method. Our simulation results illustrate that the proposed scheme can significantly reduce the power dissipation and effectively lengthen the lifetime of the network.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.219-226
• /
• 2006

MANET은 토폴로지의 빈번한 변화에 따라 경로가 짧은 기간 동안만 유지되고 모든 노드는 에너지를 배터리에 의존하기 때문에 배터리에 많은 제약을 받는다 이와 같은 제한사항을 극복하기 위해 링크의 안정성을 유지하거나 파워 소모를 고려한 프로토콜에 대한 연구들이 활발히 이루어져 왔다. 하지만 링크의 안정성 또는 파워 소모의 어느 한 측면만을 고려함으로써 링크의 안정성은 높일 수 있으나 파워 소모가 효율적이지 못하다. 또한 전체 파워소모는 줄일 수 있으나 파워소모의 균형을 이루지 못함으로써 네트워크 수명을 오래 지속시킬 수 없는 문제점이 발생 한다. 본 논문에서는 배터리 잔량과 신호세기를 동시에 고려하여 각 노드들의 균형된 파워소모와 네트워크 전체의 파워 소모를 최소화함 으로써 네트워크 수명을 오래 지속시키기 위한 프로토콜인 RBSSPR(Residual Battery Capacity and Signal Strength Based Power-aware Routing Protocol in MANET)를 제안한다. RBSSPR은 AODV(Ad-hoc On-demand Distance Vector Routing)를 기반으로 하였다. NS-2 네트워크 시뮬레이션 결과를 통해, 제안된 RBSSPR이 특정 노드로 집중되는 트래픽을 분산시켜 파워소모의 균형을 이루고 네트워크 전체의 파워소모를 최소화함으로써 네트워크 수명을 연장시킴을 보였다.

• Journal of Communications and Networks
• /
• 제5권3호
• /
• pp.202-214
• /
• 2003

The central challenge in the design of ad-hoc networks is the development of dynamic routing protocol that efficiently finds route between mobile nodes. Several routing protocols such as DSR, AODV and DSDV have been proposed in the literature to facilitate communication in such dynamically changing network topology. In this paper, a Node Transition Probability (NTP) based routing algorithm, which determines stable routes using the received power from all other neighboring nodes is proposed. NTP based routing algorithm is designed and implemented using Global Mobile Simulator (GloMoSim), a scalable network simulator. The performance of this routing algorithm is studied for various mobility models and throughput, control overhead, average end-to-end delay, and percentage of packet dropped are compared with the existing routing protocols. This algorithm shows acceptable performance under all mobility conditions. The results show that this algorithm maximizes the bandwidth utilization during heavy traffic with lesser overhead.