• 한국진공학회지
• /
• 제18권2호
• /
• pp.133-140
• /
• 2009

본 연구에서는 RF 파워, 기판의 종류, 산소분압비의 다양한 제작조건으로 RF 마그네트론 스퍼터링법을 이용하여 $Ta_{2}O_{5}$ 박막을 제작하였다. 제작된 $Ta_{2}O_{5}$ 박막의 분석을 위해 위상변조방식의 분광타원계를 이용하여 타원상수를 $1.0{\sim}4.0eV$ 영역에 걸쳐 측정하였고, Tauc-Lorentz 분산관계식을 이용하여 박막의 두께와 광학상수를 분석한 결과 제작조건에 따른 광학상수의 크기와 분간형태의 변화가 나타났다. 또한 분산관계식에 의해 분석된 박막의 두께와 광학상수를 이용하여 얻은 투과율 스펙트럼을 UV-Vis 분광광도계에 의해 측정된 값과 비교하여 타원상수 분석을 통해 얻은 두께와 광학상수의 신뢰성을 확인하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1126-1126
• /
• 2001

The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.

• 폴리머
• /
• 제25권3호
• /
• pp.399-405
• /
• 2001

Poly[3-octylthiophene-co-3-(4-fluorophenyl)thiophene]를 2:1, 1:1, 1:2의 몰 비로 공중합한 뒤 유기 발광 소자를 제작하였다. 이렇게 공중합한 고분자의 광ㆍ전기적인 특성을 PL, EL 스펙트럼과 I-V, V-L 곡선을 이용하여 조사하였고, 전자 흡수 스펙트럼과 순환 전압 전류 곡선을 이용하여 band diagram을 얻었다. P(OT/FPT)(1:1)의 경우 LUMO 값이 -3.35eV로 가장 낮았다. EL과 PL 스펙트럼에서는 fluorophenyl 기의 함량이 증가함에 따라 발광 파장이 장파장으로 이동하였으나, P(OT/FPT)(1:2)의 경우에는 단파장으로 이동하였다 이것은 fluoro-phenyl 기의 함량이 증가하여 고분자 사슬이 뒤틀리게 되어 ${\pi}$-conjugation이 깨어져 공액 길이가 짧아지는 효과를 나타냈기 때문이다. P(OT/FPT)(1:1)는 34cd/$m^2$으로 가장 우수한 휘도를 갖는 짙은 적색 발광을 하였다. 또한 발광 효율에서도 P(OT/FPT)(1:1)가 가장 우수한 것으로 나타났다. P(OT/FPT)(1:2)의 경우 필름 표면이 고르지 못하여 국부적으로 누설 전류가 흐르기 때문에 발광 효율이 낮아지는 것으로 믿어진다.

• 한국자기공명학회논문지
• /
• 제12권1호
• /
• pp.14-25
• /
• 2008

To investigate the 3-bond connectivity of human brain metabolites by scalar coupling interaction through 2D-correlation spectroscopy (COSY) techniques using high field NMR spectroscopy. All NMR experiments were performed at 298K on Unity Inova 500 or 600 (Varian Inc.) equipped with a triple resonance probe head with z-shield gradient. Human brain metabolites were prepared with 10% $D_2O$. Two dimensional 2D COSY spectra were acquired with 4096 complex data points in $t_2$ and 128 or 256 increments in $t_1$ dimension. The spectral width was 9615.4 Hz and solvent suppression was achieved using presaturation using low power irradiation of the water resonance during 2s of relaxation delay. NMR data were processed using VNMRJ (Varian Instrument) software and all the chemical shifts were referenced to the methyl resonance of N-acetyl aspartate (NAA) peak at 2.0 ppm. Total 10 metabolites such as N-acetyl aspartate (NAA), creatine (Cr), choline (Cho), glutamine (Gln), glutamate (Glu), myo-inositol (Ins), lactate (Lac), taurine (Tau), ${\gamma}$-aminobutyricacid (GABA), alanine (Ala) were included for major target metabolites. Symmetrical 2D-COSY spectra were successfully acquired. Total 14 COSY cross peaks were observed even though there were parallel/orthogonal noisy peaks induced by water suppression. Except for Cr, all of human brain metabolites produced COSY cross peaks. The spectra of NAA methyl proton at 2.02 ppm and Glu methylene proton ($CH_2(3)$) at 2.11 ppm and Gln methylene proton ($CH_2(3)$) at 2.14 ppm were overlapped in the similar resonance frequency between 2.00 ppm and 2.15 ppm. The present study demonstrated that in vitro 2D-COSY represented the 3-bond connectivity of human brain metabolites by scalar coupling interaction. This study could aid in better understanding the interactions between human brain metabolites in vivo 2D-COSY study. Also it would be helpful to determine the molecular stereochemistry in vivo by using two-dimensional MR spectroscopy.

• 한국전산구조공학회논문집
• /
• 제33권1호
• /
• pp.63-72
• /
• 2020

본 연구의 목적은 원자로 1400(APR 1400) 원자력 발전소(NPP)의 원자로 격납건물(RCB) 내진성능에 대해 상이한 수치모델과 지진 주파수 성분의 영향을 평가하는 것이다. 집중 질량 막대 모델(lumped-mass stick model, LMSM)과 3차원 유한요소모델(three-dimensional finite element model, 3D FEM)의 두 가지 수치 모델이 시간이력해석을 수행하기 위해 개발되었다. LMSM은 기존의 집중 질량 보-요소를 사용하여 SAP2000으로 구성하였으며, 3D FEM은 각기둥 입체-요소를 사용하여 ANSYS로 작성되었다. 저주파수 및 고주파수 성분을 고려한 두 그룹의 지진파를 시간이력해석에 적용하였다. 저주파수 지진파의 응답스펙트럼을 NRC 1.60의 설계 스펙트럼과 일치되도록 조정하여 작성하였으며, 고주파수 지진파는 10Hz ~ 100Hz의 고주파수 범위를 갖도록 생성하였다. RCB의 지진응답은 다양한 높이에서 층응답스펙트럼으로 검토하였다. 수치해석 결과, 저주파수 지진에 의한 구조물의 FRS 결과는 두 수치 모델에서 매우 유사한 결과를 보였다. 하지만, 고주파수 지진에 의한 LMSM의 FRS 결과는 고차 고유 주파수 영역에서 3D FEM과 큰 차이를 보였으며, RCB의 낮은 높이에서 명확한 차이를 보였다. 3D FEM이 정확한 구조물의 응답을 나타내는 것으로 가정한다면, RCB의 LMSM은 고주파수 지진에 의한 FRS 결과의 고차 고유 주파수 영역에서 일정 수준의 불일치성을 내포하고 있다.

• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.10-17
• /
• 2000

화력발전소 보일러의 주증기관, 헤더, 스팀드럼 등과 같은 주요 고온배관설비에서 발생하는 크리프 손상을 측정하는 비파괴적 측정방법에는 레프리카, 전기저항법 및 경도법 둥이 적용되고 있으나, 이들 방법들은 측정절차 및 준비가 복잡할 뿐만 아니라 접근이 가능한 설비표면에만 적용되는 제한점을 가지고 있다. 따라서 본 논문은 이들 종래의 방법을 신뢰성 있고 정량적인 초음파 비파괴평가법으로 보완 및 적용을 위하여, 실제 고온배관의 운전조건을 모의하여 수행한 크리프 인공열화실험 및 이들 크리프손상재에 대한 초음파실험을 통한 주파수분석 연구로서, 크리프손상 상태별 초음파 신호 분류를 위해 초음파신호의 각종 주파수특성을 평가하였다.

• 한국가스학회지
• /
• 제5권1호
• /
• pp.1-6
• /
• 2001

고강도 알루미늄 합금 2024-T3와 모제 시험편과 부식 시험편을 사용하여 피로 균열 진전증에 발생하는 음향방출 신호를 검출 분석하였다. 시험편 조건에 관계없이 5종류의 신호가 관찰되었다. 모재에서 얻어진 신호는 피로하중을 받으므로서 균열 발생 초기 노치선단외 돌출과 함몰에 의한 높은 에너지를 가진 짧은 기간의 입내 파괴 신호이며, 부식 시험편은 피트 선단 근처의 결정경계의 치화로 인하여 입계 파괴 신호이다. 따라서, 파형과 파워 스펙트럼은 시험편 조건에 의존하는 것 같다. 시험편 조건에 의한 파형과 파워 스펙트럼을 해석함으로써 구조부재의 다향한 손상과 결함으로부터 발생하는 균열 전파와 최종 파괴과정의 실시간 감시 가능하다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.45-49
• /
• 2008

Polyethylene is widely used as the insulator for power cable. To investigate the conduction mechanism for power cable insulation under ac high field, it is very important to acquire the dissipation current under actual running field. Recently, we have developed the unique system, which make possible to observe the nonlinear dissipation current waveform. In this system, to observe the nonlinear properties with high accuracy, capacitive current component is canceled by using inverse capacitive current signal instead of using the bridge circuit for canceling it. We have already reported that the dissipation currents of $40\;{\mu}m$ thick LDPE film at 10 kV/mm and over 140 Hz, it starts to show nonlinearity and odd number's harmonics were getting large. To investigate the conduction mechanis ms in this region, especially space charge effect, various kinds of estimation, such as time variations of instantaneous resistivity for one cycle, FFT spectra of dissipation current waveforms and so on, has been examined. As the results of these estimations, it was found that the dissipation current will depend on not only the instantaneous value of electric field but also the time differential of applied electric field due to taking a balance between applied field and internal field. Furthermore, two large peaks of dissipation current for each half cycle were observed under certain condition. In this paper, to clarify the reason why it shows two peaks for each half cycle, the film thickness dependences of dissipation current waveforms were observed by using the three different thickness LDPE films.

• 소음진동
• /
• 제9권4호
• /
• pp.720-729
• /
• 1999

Coventional methods for reducing vibration in engineering designs (i.e. by stifferning or detuning) may be undesirable in conditions where size or weight must be minimized, or where complex vibration spectra exist. Some alloys with a combination of high damping capacity and good mechanical properties can provide attractive techanical and economical solutions to problems involving seismic, shock and vibration isolation. Although several non ferrous damping alloys have been developed, none of those materials are applied in any industrial factor due largely to high production cost. To meet these requirement, we have developed a new Fe-Mn high damping alloy. In previous studies, we have reported that an Fe-17%Mn alloy exhibits the highest damping capacity(Specific Damping Capacity:SDC, 30%) among Fe-Mn binary system, and proposed that the boundaries of various types such as $\varepsilon$-martensite variant boundaries, stacking faults in $\varepsilon$-martensite, stacking faults in austenitic and ${\gamma}$$\gamma /\varepsilon$ interfaces give rise to a high damping capacity. The Fe-17%Mn alloy also has advantages of good mechanical properties(T.S. 70 kg/nm$^2$ and low cost over other damping alloys(1/4 times the cost of non-ferrous damping alloy). Thus, the Fe-17%Mn high damping alloy can be widely applied to household appliances, automobiles, industrial facilities and power plant components. In this paper, the overall properties of the Fe-17%Mn high damping alloy is introduced, and its applicability to containment spray pump in the power plant is discussed.

• Wind and Structures
• /
• 제26권4호
• /
• pp.191-204
• /
• 2018

This article presents a study of the largest-ever (height = 220 m) cooling tower using the large eddy simulation (LES) method. Information about fluid fields around the tower and 3D aerodynamic time history in full construction process were obtained, and the wind pressure distribution along the entire tower predicted by the developed model was compared with standard curves and measured curves to validate the effectiveness of the simulating method. Based on that, average wind pressure distribution and characteristics of fluid fields in the construction process of ultra-large cooling tower were investigated. The characteristics of fluid fields in full construction process and their working principles were investigated based on wind speeds and vorticities under different construction conditions. Then, time domain characteristics of ultra-large cooling towers in full construction process, including fluctuating wind loads, extreme wind loads, lift and drag coefficients, and relationship of measuring points, were studied and fitting formula of extreme wind load as a function of height was developed based on the nonlinear least square method. Additionally, the frequency domain characteristics of wind loads on the constructing tower, including wind pressure power spectrum at typical measuring points, lift and drag power spectrum, circumferential correlations between typical measuring points, and vertical correlations of lift coefficient and drag coefficient, were analyzed. The results revealed that the random characteristics of fluctuating wind loads, as well as corresponding extreme wind pressure and power spectra curves, varied significantly and in real time with the height of the constructing tower. This study provides references for design of wind loads during construction period of ultra-large cooling towers.