• 전기의세계
• /
• v.16 no.1
• /
• pp.19-28
• /
• 1967

Indigenous energy resources available in Korea are limited to the three major resources such as Korean anthracite, hydraulic potential and wood and straws. As reported in various reports concerning energy problem in Korea, unfortunately these three major resources are not only poor in quality but also limited in quantity. The amount of energy to be imported, which will be increased at a considerably high rate by years due to the shortage in the supply by domertic sources against the demand, is studied in the view-pint of sound and logical energy dependence upon the external sources. What would occur, if the imported energy would be exclusively limited to an energy source only, has an enough reason to be paid a significant consideration. As a result, the feasibility is discarded in favour of nuclear power plants after an extensive prospect for electric power development plan covering more than coming thirty years, i.e., up to the year of 2,000 A.D. In briefing, this paper indicates that a measures to accomodate as large amount of nuclear power plants as possible in the electric power system is not only inevitable for a sound solution of the severe energy problem with which Korea is to be confronted but also leads to the national benefit.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.11a
• /
• pp.14-16
• /
• 1994

The development of proton exchange membrane fuel cells(PEMFCs) with high energy efficiencies and high power densities is gaining momentum because their performance characteristics are attractive for terrestrial(power sources for electrical vehicles, stand-by power), space and underwater application[1]. Fuel cells are capable of running on non-petroleum fuels such as methanol, natural gas or hydrogen and also have major impact on improving air quality. They virtually eliminate particulates, NO$_{x}$, SO$_{x}$, and significant reduce hydrocarbons and carbon monoxide. Especially, fuel cell-battery hybrid power sources appear to be well suited to overcome both the so-called battery problem(low energy density) and the fuel cell problem(low power density)[2].[2].

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2139-2149
• /
• 2016

In this study, a new type of cascaded modular multilevel inverters (CMMLIs) is presented which is able to produce a considerable number of output voltage levels with a reasonable number of components. Accordingly, each series stage of the proposed CMMLI is comprised of two same basic units that are connected with each other through two unidirectional power switches without aiming any of the full H-bridge cells. In addition, since the potentiality for generating a higher number of output voltage levels in CMMLIs hinges on the magnitude of the dc voltage sources used in each series unit, in the rest of this paper, four different algorithms for determining an appropriate value for the dc sources' magnitude are also presented. In the following, a comprehensive topological analysis between some CMMLI structures reported in the literature and proposed structure along with several simulation and experimental results will be also given to validate the lucrative benefits and viability of the proposed topology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.486-492
• /
• 2017

In recent years, renewable energy sources have been mentioned as solution to environmental regulation and energy supply-demand. Energy storage systems are needed to mitigate the intermittent output characteristics of renewable energy sources and to operate micro grid efficiently using renewable energy generation systems. However, despite the necessity of energy storage system, this cannot secure the economical efficiency of the energy storage system by high initial cost. In this paper, a micro grid is constructed to supply electric power to industrial customers by using solar power generation system and energy storage system among renewable energy generation power sources and operated to improve energy independence. In the case study, we use photovoltaic system which is representative renewable energy generation system. Unlike conventional photovoltaic system, this system uses floating photovoltaic system with the advantage of having high output and no land area limitations. It is operated for the purpose of improving energy independence in the micro grid. In order to secure economical efficiency, the energy storage system operates a micro grid with a minimum capacity. Finally, this paper calculates the appropriate subsidy for the energy storage capacity.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1007-1015
• /
• 2017

This paper proposes a new control technique of energy storage system (ESS) for smoothing the active power of renewable energy sources (RES) such as photovoltaic and wind turbine generation. As the penetration of RES into grid increases, it is difficult to maintain the permissible level of power quality, that is, voltage and frequency fluctuation in power systems. To solve this problem, ESS control methods using low pass filter (LPF) have been proposed for mitigating the fluctuation of RES output. However, those have a lot of drawbacks which need to be supplemented. Hence, this paper presents the improved active power control with additional reactive power control for maintaining power quality properly. The proposed method minimizes the capacity of ESS to be required for smoothing RES output fluctuation through mitigation of phase delay problem in LPF. In addition, the voltage regulation improves by using additional reactive power control. The proposed method was verified through simulation analysis using PSCAD/EMTDC.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1259-1267
• /
• 2023

In recent years, as the demand for distributed power has increased, the need for microgrids connected to grid power and renewable power generation sources has emerged. In the case of DC microgrids, reactive power does not occur, and power conversion losses are reduced compared to AC when connecting to the load and power grid[2]. With the revitalization of the DC distribution network industry, various studies and demonstrations of DC microgrids have been carried out. In the case of the recent unit distribution, its stability and effectiveness have been verified through empirical and research analysis. However, there is a lack of empirical tests to prevent chain accidents for the protection of the power grid circuits and the misoperation of the distributed power system caused by individual accidents when connecting various distributed power sources and power grids. In this paper, the operation plan of a stable multi-circuit DC distribution connection for the demonstration site was verified through the protection cooperation and operation algorithm for the stable linkage management of the DC distribution network composed of such a multi-circuit.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.142-149
• /
• 2000

It is required that the indoor-noise level of KHST (Korean high speed train) should be lower than 66 ㏈(A) at 350 km/h. In this study, the indoor-noise level of KHST has been predicted to determine the maximum allowable sound power levels of major noise sources. It is found that the indoor-noise requirement for KHST can be met by increasing the transmission losses of the floor and side-wall structures as well as by lowering the sound power levels of two major noise sources including the motor fans.

• The Journal of Industrial Distribution & Business
• /
• v.5 no.1
• /
• pp.11-15
• /
• 2014

Purpose - The core objective of this study is to comprehend the diverse nature of implementation of sources of power in the Indian context. Research design, data, and methodology - After a meticulous review of the relevant literature on various types of power with a particular kind of managers'involvement, the article reviews the Indian managers' behavioral perception and attitudinal disposition while exercising power in their organization, along with a judicious blend of different kinds of power to drive the organization to the expected level. Results - As an input to a full-fledged research study, researchers had taken up this precise discussion and observation on how the managers' community in India exercises its power. Generally, Indian managers usually implement legitimate power besides reward and coercive power as per the situation, by extending copious benefits to different stakeholders. Based on the psychological and behavioral disposition, Indian managers exercised power in their respective organizations in a fruitful manner. Conclusions -This article has carefully covered the entire corporate sector regardless of magnitude, type, or ownership. It is quite beneficial to all the proactive researchers and academia along with the corporate world.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.36.2-37
• /
• 2016

We study the long-term radio variability of 43 radio bright AGNs by exploiting the data base of the University of Michigan Radio Astronomy Observatory (UMRAO) monitoring program. The UMRAO database provides high quality lightcurves spanning 25 - 32 years in time at three observing frequencies, 4.8, 8, and 14.5 GHz. We model the periodograms (temporal power spectra) of the observed lightcurves as simple power-law noise (red noise, spectral power $P(f){\propto}f^{-{\beta}}$ using Monte Carlo simulations, taking into account windowing effects (red-noise leak, aliasing). The power spectra of 39 (out of 43) sources are in good agreement with the models, yielding a range in power spectral index (${\beta}$) from ${\approx}1$ to ${\approx}3$. We find a strong anti-correlation between ${\beta}$ and the fractal dimension of the lightcurves, which provides an independent check of the quality of our modelling of power spectra. We fit a Gaussian function to each flare in a given lightcurve to obtain the flare duration. We discover a correlation between ${\beta}$ and the median duration of the flares. We use the derivative of a lightcurve to obtain a characteristic variability timescale which does not depend on the assumed functional form of the flares, incomplete fitting, and so on. We find that, once the effects of relativistic Doppler boosting on the observed timescales are corrected, the variability timescales of our sources are proportional to the black hole mass to the power of ${\alpha}=1.70{\pm}0.49$. We see an indication for AGNs in different regimes of accretion rate, flat spectrum radio quasars and BL Lac objects, having different scaling relations with ${\alpha}{\approx}1$ and ${\approx}2$, respectively. We find that modelling the periodograms of four of our sources requires the assumption of broken powerlaw spectra. From simulating lightcurves as superpositions of exponential flares we conclude that strong overlap of flares leads to featureless simple power-law periodograms of AGNs at radio wavelengths in most cases (The paper is about to be submitted to ApJ).

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.30-40
• /
• 2015

For a shunt power quality controller (SPQC) the DC side voltage value which is closely related to the compensation performance is a significant parameter. Buy so far, very little discussion has been conducted on this in a quantitative manner by previous publications. In this paper, a method to design the DC side voltage of SPQC is presented according to the compensation performance in the single-phase system and the three-phase system respectively. First, for the reactive current and the harmonic current compensation, a required minimal value of the DC side voltage with a zero total harmonic distortion (THD) of the source current and a unit power factor is obtained for a typical load, through the equivalent circuit analysis and the Fourier Transform analytical expressions. Second, when the DC side voltage of SPQC is lower than the above-obtained minimal value, the quantitative relationship between the DC side voltage and the THD after compensation is also elaborated using the curve diagram. Hardware experimental results verify the design method.