• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.286-294
• /
• 2009

Hydroelectric power plants are known for their ability to cover variations of the consumption in electrical power networks. In order to follow this changing demand, hydraulic machines are subject to off-design operation. In that case, the swirling flow leaving the runner of a Francis turbine may act under given conditions as an excitation source for the whole hydraulic system. In high load operating conditions, vortex rope behaves as an internal energy source which leads to the self excitation of the system. The aim of this paper is to identify the influence of the full load excitation source location with respect to the eigenmodes shapes on the system stability. For this, a new eigenanalysis tool, based on eigenvalues and eigenvectors computation of the nonlinear set of differential equations in SIMSEN, has been developed. First the modal analysis method and linearization of the set of the nonlinear differential equations are fully described. Then, nonlinear hydro-acoustic models of hydraulic components based on electrical equivalent schemes are presented and linearized. Finally, a hydro-acoustic SIMSEN model of a simple hydraulic power plant, is used to apply the modal analysis and to show the influence of the turbine location on system stability. Through this case study, it brings out that modeling of the pipe viscoelastic damping is decisive to find out stability limits and unstable eigenfrequencies.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권2호
• /
• pp.120-128
• /
• 2016

파력발전은 파도의 위치에너지와 운동에너지를 이용한 발전방식으로 본 논문에서는 선형동기발전기를 이용한 파력발전시스템에 대하여 연구를 진행하였다. 파력 발전시스템을 분석하기 위해서는 부이의 운동과 부이와 연결과 발전기의 운동을 모델링하는 것이 매우 중요하다. 본 논문에서는 발전시스템의 분석을 위하여 선형발전기와 컨버터 시스템의 모델링을 진행하였다. 선형발전기와 컨버터 시스템의 전압 방정식 및 부이의 운동방정식을 이용하여 2상 회전좌표계에서의 벡터제어기법을 적용하여 댐핑기반의 제어기 구성을 제안한다. 파도 에너지로부터 전기에너지를 추출하기 위해서 파력발전기의 전류제어를 통해 댐핑을 적절히 조절할 수 있는 벡터제어기법 구성에 대해 제안한다. 최종적으로 제안된 제어기의 검증을 위하여 MATLAB/Simulink를 이용한 2상 회전좌표계에서의 벡터제어기의 시뮬레이션을 수행하였으며 선형 발전기 축소모델와 PCS 축소모델을 통한 실험을 수행하였다.

• Nuclear Engineering and Technology
• /
• 제18권1호
• /
• pp.9-16
• /
• 1986

1984년 11월 14일 원자력 1호기에서 발생된 주급수 상실사고에 대한 계통의 열수력학적인 거동을 모의·해석하고, 발전소 실측자료와의 비교를 통하여 사용된 전산코드의 신뢰도를 평가하였다. 모의된 열수력학적 변수들은 발전소 실측자료와 비교적 잘 일치하였으나 원자로 트립시에 증기발생기 증기유량과 주 냉각재 계통 평균온도에 있어서 약간의 차이를 보였다. 이는 원자로 트립시 깎은 시간에 급격한 노심 출력의 감소로 인하여 열·수력학적 변수들에 큰 변화를 야기하여 발전소 실측자료가 과도상태에서의 불학실성을 내포하기 때문으로 예측되었다. 해석에 사용된 전산코드는 RELAP5/MOD1/CY018로부터 불합리한 oscillation을 일으키는 interphase drag 및 wall heat transfer model의 수정을 통하여 개발된 RELAP5/MOD1/NSC이다.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.227-240
• /
• 2010

Coal gasification is heading for a great future as one of the cleanest energy sources, which can produce not only electricity and heat, but also gaseous and liquid fuels from the synthesis. The work focuses on 300MW shell type one-stage entrained flow coal gasifier which is used in the Integrated coal Gasification Combined Cycle(IGCC) plant as a reactor. As constructing an IGCC plant is considerably complicated and expensive compared with a pulverized-coal power plant, it is important to determine optimum design factors and operating conditions using a computational fluid dynamics (CFD) model. In this study, the results of numerical calculations show that $O_2$/Coal ratio, 0.83, Steam/Coal ratio, 0.05, coal particle diameter, $100{\mu}m$, injection angle, $4^{\circ}$ (clockwise) are the most optimum in this research.

• 농업생명과학연구
• /
• 제53권4호
• /
• pp.113-124
• /
• 2019

본 연구에서는 국내 밭작물 재배농가에서 주로 사용되는 캠방식 채소 정식기를 대상으로 작동특성 및 식부장치 작동 메커니즘 분석을 수행하였다. 정식기의 주요 구성요소 및 동력전달경로를 파악하였으며, 주행속도 및 주간거리 단수 변화에 따른 최대 및 최소 작동주기를 도출하였다. 이를 바탕으로 3D모델링 및 시뮬레이션을 수행하여 식부호퍼 극하단점의 궤적 및 조건별 주간거리를 도출하였으며 필드시험을 통해 실제 주간거리와 비교 검증하였다. 주요 결과로써, 식부장치는 13개의 링크와 17개의 회전 조인트 및 1개의 하프 조인트로 구성된 1 자유도의 기구이며, 각 부분들은 캠과 링크장치들의 복합구조를 갖는다. 식부장치 요소들의 연속적이고 반복적인 운동에 의해 식부호퍼는 지면과 연직인 자세를 유지하며 묘를 안정적으로 정식한다. 동력은 엔진과 변속기를 통해 주행부 및 식부장치로 전달되었으며 식부장치의 최대 및 최소 주간거리는 각각 약 900 mm 및 350 mm이다.

• 대한지리학회지
• /
• 제47권5호
• /
• pp.755-774
• /
• 2012

본 논문의 주된 연구목적은 비선호 시설, 특히 원자력 발전소의 인구분포 관련 입지기준 평가를 위한 GIS-기반 방법론을 제안하는 것이다. 이 연구목적을 달성하기 위해 우선 IAEA, 미국의 NRC, 그리고 한국원자력안전기술원이 제시하고 있는 입지기준을 살펴보았다. 그 결과 원자력 발전소에 가장 가까이에 위치한 인구중심지까지의 거리를 최대화하는 것이 가장 중요한 입지 평가 원리임이 확인되었다. 이 원리를 실행하기 위한 GIS-기반 방법론은 서로 연관된 두 가지 하위 과제를 수행해야 하는 것으로 판단되었는데, 하나는 인구분포에 대한 정밀한 재현이고, 또 다른 하나는 인구중심지의 확인이다. 본 연구는 전자에 대해서는 대시메트릭 에어리얼 인터폴레이션 기법을, 후자에 대해서는 셀-기반 임계밀도 기법과 구역-기반 임계밀도 기법을 제시한다. 대시메트릭 에어리얼 인터폴레이션을 통해 다양한 공간해상도를 갖는 그리드 셀 단위의 인구밀도 분포의 재현이 이루어진다. 이것에 두 가지 인구중심지 확인 기법을 적용함으로써 특정한 임계밀도와 인구 규모 기준을 만족하는 인구중심지가 확인된다. 이 기법들을 우리나라 고리 원전 1호기의 사례에 적용하여 그 유용성과 한계를 평가하였다. 그 결과 적용된 기법과 투입된 파라미터 값에 따라 입지기준 평가의 결과가 달라질 수 있음이 드러났다. 본 연구는 지리공간분석 및 모델링 분야에서 개발된 기법을 입지 결정과 평가에 적용하는 시도의 활성화에 기여할 것으로 기대된다.

• 한국환경복원기술학회지
• /
• 제24권5호
• /
• pp.1-14
• /
• 2021

Excessive development and urbanization have destroyed animal, plant, habitats and reduced biodiversity. In order to preserve species diversity, habitat prediction studies are have been conducted at home and overseas using various modeling techniques. This study was conducted to suggest optimal habitat modeling research by comparing HSI and MaxEnt, which are widely used among habitat modeling techniques. The study was targeted on the endangered species of Prionailurus bengalensis in nearby areas (5460.35km2) including Cheonan City, and the same data were used for analysis to compare those models. According to the HSI analysis, Prionailurus bengalensis's habitat probability was 74.65% for less than 0.5 and 25.34% for more than 0.5 and the top 30% were forest (99.07%). MaxEnt's analysis showed that 56.22% of those below 0.5 and 43.79% of those above 0.5 were found to have a high explanatory power of 78.3% of AUC. The Paired Wilcoxn test, which evaluated the significance of thoes models, confirmed that the mean difference between the two models was statistically significant (p<0.05). Analysis of the differences in the results of those models using the matrix table shows that score 24.43% HSI and MaxEnt was accordance,12.44% of the 0.0 to 0.2 section, 7.22% of the 0.2 to 0.4 section, 2.73% of the 0.4 to 0.6 section, 1.96% of the 0.6 to 0.8, and 0.08% of the 0.9 to 1.0. To verify where the score difference appears, the result values of those models were reset to values from 1 to 5 and overlaid. Overlapping analysis resulted in 30.26% of the Strongly agree values, 56.77% of the agree values, and 11.92% of the Disagree values. The places where the difference in scores occurs were analyzed in the order of forest (45.23%), agricultural land (34.57%), and urbanization area (7.65%). This confirmed that the analysis of the same target species within the same target site also has differences in forecasts depending on the modelling method. Therefore, a novel analysis method combining the advantages of each modeling in habitat prediction studies should be developed, and future study may be used to select Prionailurus bengalensis and species-protected areas and species protection areas in the future. Further research is judged to require higher accuracy studies through the use of various modeling techniques and on-site verification.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.136-146
• /
• 2019

A solid oxide fuel cell (SOFC) based hybrid desiccant cooling system model is developed to study the effect of fuel utilization rate of the SOFC on the reduction of energy consumption and $CO_2$ emission. The SOFC-based hybrid desiccant cooling system consists of an SOFC system and a Hybrid desiccant cooling system (HDCS). The SOFC system includes a stack and balance of plant (BOP), and HDCS. The HDCS consists of desiccant rotor, indirect evaporative cooler, electric heat pump (EHP), and heat exchangers. In this study, using energy load data of a commercial office building and SOFC-based HDCS model, the amount of ton of oil equivalent (TOE) and ton of $CO_2$ ($tCO_2$) are calculated and compared with the TOE and $tCO_2$ generation of the EHP using grid electricity.

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.1-8
• /
• 2020

Recently, industrial systems are becoming quicker and lighter to enable the reduction of energy consumption and increase productivity. So the latest systems are more flexible and rapid than the previous systems. But, with this improvement, another problem has emerged, such as the increase in residual vibration when a system is started or stopped. The input shaper is a command generation method that can remove residual vibration. It can provide a solution to the problem of residual vibration in industrial systems. However, it is difficult to generate the input shaper in high order systems, such as a typical industrial system because the input shaper is induced from the system's vibration characteristics. This study focused on the extra insensitivity shaper that can compensate for the system's modeling error such as input dynamics, and the high order's system affection. A genetic algorithm was deployed to adjust a vibration limitation for the extra insensitivity of the input shaper. A plant is a low damping system that includes one zero and a pole. The fitness functions are an error signal of the system's response with normalized frequency variations. Verification of the suggested system is satisfied by comparison between the zero vibration derivative input shaper's response and the suggested one.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.449-456
• /
• 2007

Dispersion coefficient preprocessing schemes have been examined to improve plume dispersion model performance in complex coastal areas. The performances of various schemes for constructing the sigma correction order were evaluated through estimations of statistical measures, such as bias, gross error, R, FB, NMSE, within FAC2, MG, VG, IOA, UAPC and MRE. This was undertaken for the results of dispersion modeling, which applied each scheme. Environmental factors such as sampling time, surface roughness, plume rising, plume height and terrain rolling were considered in this study. Gaussian plume dispersion model was used to calculate 1 hr $SO_2$ concentration 4 km downwind from a power plant in Boryeung coastal area. Here, measured data for January to December of 2002 were obtained so that modelling results could be compared. To compare the performances between various schemes, integrated scores of statistical measures were obtained by giving weights for each measure and then summing each score. This was done because each statistical measure has its own function and criteria; as a result, no measure can be taken as a sole index indicative of the performance level for each modeling scheme. The best preprocessing scheme was discerned using the step-wise method. The most significant factor influencing the magnitude of real dispersion coefficients appeared to be sampling time. A second significant factor appeared to be surface roughness, with the rolling terrain being the least significant for elevated sources in a gently rolling terrain. The best sequence of correcting the sigma from P-G scheme was found to be the combination of (1) sampling time, (2) surface roughness, (3) plume rising, (4) plume height, and (5) terrain rolling.