• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.71-76
• /
• 2016

A controller area network (CAN) receiver measures differential voltage on a bus to determine the bus level. Since 3.3V transceivers generate the same differential voltage as 5V transceivers (usually ${\geq}1.5V$), all transceivers on the bus (regardless of supply voltage) can decipher the message. In fact, the other transceivers cannot even determine or show that there is anything different about the differential voltage levels. A new CMOS RC oscillator insensitive supply voltage for clock generation in a CAN transceiver was fabricated and tested to compensate for this drawback in CAN communication. The system consists of a symmetrical circuit for voltage and current switches, two capacitors, two comparators, and an RS flip-flop. The operational principle is similar to a bistable multivibrator but the oscillation frequency can also be controlled via a bias current and reference voltage. The chip test experimental results show that oscillation frequency and power dissipation are 500 kHz and 5.48 mW, respectively at a supply voltage of 3.3 V. The chip, chip area is $0.021mm^2$, is fabricated with $0.18{\mu}m$ CMOS technology from SK hynix.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.563-576
• /
• 2017

This paper is a continuation of the investigations started in the paper by Akbarov, S.D., Guliyev, H.H and Yahnioglu, N. (2016) "Natural vibration of the three-layered solid sphere with middle layer made of FGM: three-dimensional approach", Structural Engineering and Mechanics, 57(2), 239-263, to the case where the three-layered sphere is a hollow one. Three-dimensional exact field equations of elastodynamics are employed for investigation and the discrete-analytical method is employed for solution of the corresponding eigenvalue problem. The FGM is modelled as inhomogeneous for which the modulus of elasticity, Poison's ratio and density vary continuously through the inward radial direction according to power law distribution. Numerical results on the natural frequencies are presented and discussed. These results are also compared with the corresponding ones obtained in the previous paper by the authors. In particular, it is established that for certain harmonics and for roots of certain order, the values of the natural frequency obtained for the hollow sphere can be greater (or less) than those obtained for the solid sphere.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.40-44
• /
• 2004

This study was conducted to solve the problem of spinach harvesting done by manpower at the outdoor field during the cold winter season. Prototype spinach harvester was designed to dig, pick-up, and collect in a continuous operation for harvesting outdoor field-planted crawling type spinach. In the field test, two types of blades (Type A : angle of $150^{\circ}$, Type B : straight) were used for measuring the cutting loads of spinach and chain conveyor with lugs was used for picking up the root cut spinach. Prototype's vibrating blade reduced the digging power of the fixed blade by $46\%$. The loss was also very little ($0.7\%$) with a digging depth of 4 cm, an oscillation frequency of 748 rpm, and an oscillation distance of 33 mm. The working performance of the prototype spinach harvester was 38 hour/ha resulting to $96\%$ labor cost reduction compared to the conventional harvesting.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2A
• /
• pp.91-99
• /
• 2011

Several repeater systems are used to enhance the cell coverage to location such as shadow and rural areas in mobile systems. But the general RF repeater solutions are not suitable for high power outdoor environment because it has the weakness such as self oscillation problem With adoption of a adaptive digital filter technology, feedback interference cancellation repeater prevents oscillation by detecting and canceling the unwanted feedback signal between transmission and receiver antenna. In this paper, dual NLMS based interference cancellation method is proposed and the step size adaptation can be implemented by the estimation of the feedback channel Doppler frequency characteristics. The performance of the proposed algorithm is quantified via analysis and simulation for the static and multipath fading feedback channels.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.8-14
• /
• 2011

The clogging of the flow area at the tube support plates(TSPs), especially at the upper TSPs results in the water level oscillation of a steam generator during normal operation. A reduction of the TSP flow area causes to increase in pressure drop within the two-phase flow zone, which destabilizes the boiling flow through the tube bundle. This phenomenon was occasionally observed at a few domestic and foreign nuclear power plants. One of the methods for defining the flow area clogging is visual inspection, which is the most effective inspection method. The results of the visual inspection for TSPs' flow area are clogging images on TSPs' quartrefoil lobes. These images are complexly distorted due to lens aberration and external factors like the distance to a subject and angle etc. In this work, we developed the analysis algorithm for clogging image of the TSP flow area of steam generators. For this purpose, we designed an image verification device applicable to the camera employed in the field for visual inspection and then, we demonstrated the validity of image analysis algorithm by using this device and commercial autoCAD program.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.7
• /
• pp.317-326
• /
• 2002

In this paper, a methodology for optimal PI supplementary controller using the modified genetic algorithm has been proposed to the oscillation damping in HDVC transmission system. These study processes are summarized as the formulation for load flow calculation in HVDC transmission system with SVC, the investigations on the basic control in HVDC system, the mathematical modeling for dynamic characteristics analyses, and the optimal design of MGA based PI controller generation the supplementary control signal of SVC. Its properties were verified through a series of computer simulations including dynamic stability. It means that the application of MGA-PI controller in HVDC transmission system can contribute the propriety to the improvement of the stability in HVDC transmission system and the design of MGA-OI controller has been proved indispensible when applied to HVDC transmission system.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.1
• /
• pp.17-27
• /
• 2016

Researches on the mechanism of surging and the surge behaviors in the systems of pumps, or fans or compressors, and the effects of flow-paths had been initiated and had made a great progress in Japan in the decades from the nineteen-forties to the nineteen-sixties. In 1947, the essential cause of the surges, i.e., self-excited oscillation nature of the flow-system, was discovered analytically by Professor Sumiji Fujii of Tokyo University, and most of the characteristic behaviors of the phenomena had been explained clearly. Successive studies by many other Japanese researchers continued to prove experimentally the mechanism, to extend the analytical studies, and to attempt preventing surge occurrence, etc. in the following two decades. The historical information on the early surge studies could be helpful to some concerned people. At the same time, the basic and plain ways of discussions and reasoning about the phenomena in the pioneering researches could give us much to be learned even in the present time of high-power computing systems. Regrettably, many of the original research works have been published only in Japanese. The present review introduces very briefly the situations in memories of the pioneering researchers and engineers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.405-408
• /
• 2000

We designed and fabricated VCO using inductive reactance variation at 2GHz. A varactor diode is one of the main devices in VCO, which varies capacitance depending on reverse voltage. In this paper, a varactor diode is not used as a variable capacitive reactance device but as an inductive device. The circuit design and simulation have been carried out using HP-MDS. The fabricated VCO is measured using the HP 8532B spectrum analyzer and the HP 4352B VCO/PLL analyzer. The experimental result shows the phase noise -110dBc/Hz at a 100kHz offset frequency, the control voltage sensitivity of 23MHz/V and a -3.5dBm output power with a D.C. current consumption of 5.9mA. The simulation and measurements show exact agreement except with regard to the oscillation frequency. The measured oscillation frequency is lower than the simulation result because there is some parasitic inductance in the PCB layout.

• The Journal of Natural Sciences
• /
• v.1
• /
• pp.1-6
• /
• 1987

Pulse delays among operating lines are observed in a multiline operation transversely excited atmospheric pressure $CO_2$ laser which has an intracavity germanium etalon. To show the delay effect more precisely, we have replaced the etalon with a 40%/antireflecting coated ZnSe half mirror obtained two laser lines in which the delay can be controlled by a slight tilting of the output coupler, The results show that the individual rotational vibrational transition lines must have almost equal intensities in multiline oscillation in order to obtain high peak power and short pulses.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.45.3-46
• /
• 2018

Oscillations in a sunspot are easily detected through the Doppler velocity observation. Although the sunspot oscillations look erratic, the wavelet analysis show that they consist of successive wave packets which have strong power near three or five minutes. Previous studies found that 3-min oscillation at the chromosphere is a visual pattern of upward propagating acoustic waves along the magnetic field lines. Resent multi-height observations help this like vertical study, however, we also focus on horizontal facet to extend three dimensional understand of sunspot waves. So, we investigate a fragmented sunspot expected to have complex wave profiles according to the positions in the sunspot observed by the Fast Imaging Solar Spectrograph. We choose 4 points at different umbral cores as sampling positions to determine coherence of oscillations. The sets of cross-correlation with three and five minutes bandpass filters during a single wave packet reveal interesting results. Na I line show weak correlations with some lags, but Fe I and Ni I have strong correlations with no phase difference over the sunspots. It is more remarkable at Ni I line with 3-min bandpass that all sets of cross-correlation look like the autocorrelation. We can interpret this as sunspot oscillations occur spontaneously over a sunspot at photosphere but not at chromosphere. It implies a larger or deeper origin of 3-min sunspot oscillation.