• Elastomers and Composites
• /
• v.33 no.3
• /
• pp.201-209
• /
• 1998

Alumina powders used as a filler in rubber compounding was extracted from kaolin in $H_2SO_4$ solution employing conventional thermal and microwave energy resources. Maximum degrees of alumina extraction from kaolin were 72.8% at $80^{\circ}C$, 1M $H_2SO_4$, and 180min in the conventional thermal extraction process and were 99.0% at $90^{\circ}C$, 1M $H_2SO_4$,, and 60min in the microwave extraction one, respectively. The samples synthesized in both processes were analyzed by means of TG/DTA, XRD, SEM, Atomic Emission Spectroscopy, and BET method. Studies are presently under way to unravel the basic interaction mechanisms between microwave and alumina power for high rates of alumina extraction from kaolin in the microwave ex-traction process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.586-592
• /
• 1999

Microwave assisted extraction(MAE) is known as a more environmental friendly process with economic advantages in terms of less time, less solvent, less energy and less wastes than the current time consuming reflux method. It was applied to develop a rapid extraction method for soluble ginseng components that are major materials used for the processing of ginseng products. In a comparative study between pre established MAE(ethanol 60%, power 80 W, process time 4 min$\times$5) and current extraction method(ethanol 80%, temp. 85oC, time 8 hr$\times$5), MAE was more efficient than the current method to obtain an extract yield(soluble solid), but it was insufficient to extract individual ginsenosides, total phenols, reducing components and acidic polysaccharides. MAE with 80% ethanol by 5 times showed, however, that its extraction efficiency on soluble solid, crude saponin, major ginsenosides, and the other components was equal or superior to that of the current method, indicating that ethanol concentration is one of the critical parameters influencing the MAE process. The quality of ginseng extracts from MAE was assured by evaluating the corresponding standards and by comparing TLC and HPLC patterns with the control.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.650-655
• /
• 2001

Wind speeds can vary rapidly and wind turbines cannot easily follow these variations because of their inertia and aerodynamic characteristics. For maximum energy extraction. the turbine blades should operate at their optimum tip speed ratio, but with rapid changes in wind speed. this is usually not possible. To improve the energy extraction from turbulent wind, it is necessary to establish an effective measure of the high frequency component of the wind. and then to use this measure to optimise the operation of the turbine controller for maximum energy extraction. This paper presents an approach for combining readings from three anemometers into a composite wind speed measurement. and using this signal to control the operation of a permanent magnet generator to achieve maximum energy extraction. The method combines simulation and experimental investigations into a heuristic algorithm. and demonstrates its effectiveness with field trials.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.1
• /
• pp.40-47
• /
• 2017

In this paper, we investigate the feasibility of a strategy of failure detection and identification. The point of proposed strategy includes a pattern extraction approach for failure identification using Auto-Associative Kernel Regression (AAKR). We consider a simulation data concerning 605 signals of a Generic Pressurized Water Reactor(GPWR). In the application, the reconstructions are provided by a set of AAKR models, whose input signals have been selected by Correlation Analysis(CA) for the identification of the groups. The failure pattern is extracted by analyzing the residuals of observations and reconstructions. We present the possibility of extraction of patterns for six failure.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.66-72
• /
• 2018

Corn stover is known as a good candidate for a functional food ingredient when the main lignocellulosic material, lignin, is used as bioactive materials as form of polyphenolic compounds. The purpose of this study was to determine the microwave extraction conditions under which total phenolic compounds (TPC) and flavonoid contents of corn stover were maximized. Microwave-assisted extracts using sulfuric acid ranging from 0 to 1.0 mol with extraction time between 40 and 240 sec were conducted by using response surface methodology (RSM). Microwave power showed significant effects (p<0.05) and the concentrations of TPC and flavonoids increased with increased level of microwave power and extraction time. The optimum conditions for corn stover extraction were determined as 698.6 W, 240 sec, and 0 mol sulfuric acid, and the predicted value of TPC and flavonoid is 82.4 mg GAE/g DM and 18.1 mg/g DM, respectively. Microwave extraction was evaluated as an economic process with low energy consumption, short extraction and high extraction yield of bioactive including TPC and flavonoids compared to conventional extractions.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.188-191
• /
• 2000

This paper presents a register scheduling and allocation algorithm for high level synthesis. The proposed algorithm executes the low power scheduling to reduce the switching activity using shut down technique which was not unnecessary the calculation through the extraction DFG from VHDL description. Also, the register allocation algorithm determines the minimum register after the life time analysis of all variable. It is minimum the switching activity using graph coloring technique for low power consumption. The proposed algorithm proves the effect through various filter benchmark to adopt a new scheduling and allocation algorithm considering the low power.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.521-523
• /
• 1997

With Extraction Transient Data from Booster Pump System, This paper establishs system model equation. and This equation is capable of PID control. Using Ziegler-Nichole tunning method of PID, Constantly estimated control method is done.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.934-940
• /
• 2012

Antioxidant activities such as reducing power, electron donating ability(EDA) and oxidation stability of Rumex crispus extracts with ethanol were examined, and adsorption of Pb(II) and Cd(II) with dried Rumex crispus powder in aqueous solution was experimented. Extraction yields based on the soluble solid contents ranged 1.9% to 3.0%, and were inversely proportional to solvent ratio but proportional to extraction temperature. Reducing power and EDA were also increased with extraction temperature but decreased with solvent ratio. These were corresponded to 86.4% and 91.0% of ascorbic acid reducing power and EDA, respectively, on 20 folds of solvent ratio and $75^{\circ}C$ Oxidation stability of Rumex crispus extracts on the corn seed oil was 86~91.3% of butylated hydroxytoluene. Pb(II) adsorptivity of Rumex crispus was higher than Cd(II), and adsorption rate of Pb(II) was 88% in 20 ppm concentration and 60min.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.895-902
• /
• 2010

The effect of seasonality on water quality variation is very significant. Generally, it reduce the power of the trend extraction. A parametric time-series model was used for detecting trends in historic constituent concentration data. The effect of seasonality is able to remove from time series decomposition technique. According to such statistic methode, long-term water quality trend analysis system (NTrend 1.0) was developed by Nakdong River Water Environmental Research Center. The trend analysis of BOD variation was conducted with NTrend 1.0 at Goreong and Moolkum site in Nakdong river to show the effect of water quality management action plan. Power test of trend extraction was tried each case of 'deseasonalized and deannulized' data and 'deseasonalized' data. Analysis period was from 1989 to 2006, and it's period was divided again three times, 1989~1993, 1994~1999 and 2000~2006 according to action plan period. The BOD trend was downward in Goreong site during three times and it's trend slope was very steep, and upward in Moolkum during 1989~1993, but it was turned downward during 1994~1999 and 2000~2006. It was revealed that it's very effective to reduce the concentration of BOD by water quality management action plan in that watershed. The result of power test was shown that it is high for trend extraction power in case of 'deseasonalized' data.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.73-79
• /
• 2011

ORC(organic Rankine cycle) has potential of reducing consumption of fossil fuels and has many favorable characteristics to exploit low-temperature heat sources. This work analyzes performance of ORC with superheating using low-temperature energy sources in the form of sensible energy. Maximum mass flow rate of a working fluid relative to that of a source fluid is considerd to extract maximum power from the sources. Working fluids of R134a, $iC_4H_{10}$ and $C_6C_6$, and source temperatures of $120^{\circ}C$, $200^{\circ}C$ and $300^{\circ}C$ are considered in this work. Results show that for a fixed source temperature thermal efficiency increases with evaporating temperaure, however net work per unit mass of source fluid has a maximum with respect to the evaporating temperature in the range of low source temperature. Results also show that the maximum power extraction is possible with R134a for the source temperature of $120^{\circ}C$, with $iC_4H_{10}$ for $200^{\circ}C$, and with $C_6C_6$ for $300^{\circ}C$.