• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.915-916
• /
• 2006

This paper proposed the extraction method of reactor parameters in atmosphere plasma power supply. This methods is performed by detection of phase difference between inverter voltage and current, and extraction of impedance through active, reactive power. The validity of the proposed scheme is investigated through simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.1
• /
• pp.8-13
• /
• 2012

DSTATCOM is active filter that reduces nonlinear and unbalanced currents. Researches about DSTATCOM are mainly divided two parts, one is the reference value calculation of compensation current depending on the calculation of the load-side average active power and dc-link capacitor average voltage, the other part is actual current control depending on the reference value of compensation current. This paper proposes a calculation of dc-link capacitor average voltage ripple voltage extraction instead of conventional method using LPF. The utility of the proposed algorithm is verified through the theoretical analysis and the experiment under unbalance loads and non-linear load.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1119-1122
• /
• 2000

This paper describes on RF circuit simulation technique, especially on a RF modeling and a model extraction of a LDMOS(Lateral Diffused MOS) that has gate-width (Wg) dependence. Small-signal model parameters of the LDMOSs with various gate-widths extracted from S-parameter data are applied to make the relation between the RF performances and gate-width. It is proved that a source inductance (Ls) was not applicable to scaling rules. These extracted small-signal model parameters are also utilized to remove extrinsic elements in an extraction of a large-signal model (using HP Root MOSFET Model). Therefore, we can omit an additional measurement to extract extrinsic elements. When the large-signal model with Ls having the above gate-width dependence is applied to a high-power LDMOS module, the simulated performances (Output power, etc.) are in a good agreement with experimental results. It is proved that our extracted model and RF circuit simulation have a good accuracy.

• Ocean Systems Engineering
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2019

Latching control was applied to a Wave Energy Converter (WEC) buoy with direct linear electric Power Take-Off (PTO) systems oscillating in heave direction in waves. The equation of the motion of the WEC buoy in the time-domain is characterized by the wave exciting, hydrostatic, radiation forces and by several damping forces (PTO, brake, and viscous). By applying numerical schemes, such as the semi-analytical and Newmark ${\beta}$ methods, the time series of the heave motion and velocity, and the corresponding extracted power may be obtained. The numerical prediction with the latching control is in accordance with the experimental results from the systematic 1:10-model test in a wave tank at Seoul National University. It was found that the extraction of wave energy may be improved by applying latching control to the WEC, which particularly affects waves longer than the resonant period.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.2
• /
• pp.235-245
• /
• 2017

Objectives: The purpose of this study was to investigate how wisdom tooth extraction is perceived, and to correct erroneous perceptions thereby establishing proper awareness. Methods: We conducted a survey on how wisdom tooth extraction was perceived among adults in 20 households in Seoul and Gyeonggi province starting in December, 2016. Results: A review of the factors influencing the perception of wisdom tooth extraction showed that the regression model was statistically significant and the model had an explanatory power of 8.3%. It was also found that those in their 20s or younger had saw a lower level of perceived oral health, and a higher level in perception in wisdom tooth extraction. Moreover, students, housewives, and professions showed a lower perception of wisdom tooth extraction. Conclusions: It is necessary to have an education program for adults aged 60 or older who have few opportunities for oral health education.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.681-684
• /
• 2006

A new packet extraction program is presented to extract communication packet between a server and clients. The extracted packet source is used to develope a special driver to access general clients to the server. The proposed scheme employs a relay server to take a specified packet among a large number of packets on the same network. The proposed method is tested in PMS (Plant Management System) sewer and ProDAS (Process Data Aquisition and Analysis System) in a combined cycle power plant. The developed scheme can be applied for extracting a specified communication packet between the general server and client.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.307-312
• /
• 2000

Physiologically active material ${\beta}$-glucan extracted from mushroom has an antitumor effect. Agaricus blazei murill(A blazel) fruiting bodies were reported to contain large amounts of ${\beta}$-glucan. The purpose of this study was to maximize ${\beta}$-glucn extraction from A. blazei by microwave assisted extraction method. Optimal extraction conditions were obtained under various extraction time and applied power which was examined as 200, 500 and 650 watt. The structure and concentrations of the raffinates were analyzed by nuclear magnetic resonance spectroscopy(NMR) and infrared spectroscopy(IR) It was proved that the extraction yield of microwave assisted extraction method was higher than that of conventional solvent extraction method. It was also observed that microwave assisted extraction method requires less amounts of solvents and extraction time compared to the conventional solvent extraction method.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.437-442
• /
• 2010

The objective of this study was to investigate the effect of ultrasound on the extraction of oil from canola seeds when supercritical carbon dioxide ($SCCO_2$) was used as an extraction solvent. The ultrasound-assisted $SCCO_2$ extraction were carried out while varying such operating parameters as particle size of crushed canola seed, flow rate of $SCCO_2$, aspect ratio of the extraction vessel, and ultrasound power. The extraction rate decreased with increasing particle size of samples, showing a maximun at a $CO_2$ flow rate of 6.2 L/min. Both the extraction rate and extraction yield increased with a decrease in the aspect ratio of the extraction vessel. For the ultrasoundassisted $SCCO_2$ extraction, the extraction yield was slightly increased when the $CO_2$ flow rate was below 6 mL/min with sample A and B.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.127-134
• /
• 2018

Electric transmission towers are facilities to transport electrical power from a plant to an electrical substation. The towers are connected using power lines that are installed with a proper sag by loosening the cable to lower the tension and to secure the sufficient clearance from the ground or nearby objects. The power line sag may extend over the tolerance due to the weather such as strong winds, temperature changes, and a heavy snowfall. Therefore the periodical mapping of the power lines is required but the poor accessibility to the power lines limit the work because most power lines are placed at the mountain area. In addition, the manual mapping of the power lines is also time-consuming either using the terrestrial surveying or the aerial surveying. Therefore we utilized multiple overlapping images acquired from a low-cost drone to automatically reconstruct the power lines in the object space. Two overlapping images are selected for epipolar image resampling, followed by the line extraction for the resampled images and the redundant images. The extracted lines from the epipolar images are matched together and reconstructed for the power lines primitive that are noisy because of the multiple line matches. They are filtered using the extracted line information from the redundant images for final power lines points. The experiment result showed that the proposed method successfully generated parabolic curves of power lines by interpolating the power lines points though the line extraction and reconstruction were not complete in some part due to the lack of the image contrast.

• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.438-443
• /
• 1991

The operational characteristics of the duoplasmatron ion source are investigated in order to obtain the maximum achievable extraction current of the $He^+$ ion beam with the small divergence. Under the variations of the gas pressure, the arc current, the magnet current and the extraction voltage of the ion source, the change of the extracted $He^+$ ion beam current is observed. An oxide filament, the mixture of BaO and SrO coated on Ni meshes, is used as the hot cathode, and its average lifetime is about 100 hours. The extraction current is linearly proportional to the arc current. As the magnet current of the ion source is increased, the extraction current increases, but the beam divergence becomes larger. The maximum extraction current is obtained at the source pressure of 0.084 Torr. The extraction current is proportional to the extraction voltage raised to the power of 3/2 as estimated from theory. At the extraction voltage of 5.72 kV, the maximum extraction current of 50 $\mu$A is obtained under the optimized extraction condition.