• The Korean Journal of Food And Nutrition
• /
• v.19 no.1
• /
• pp.103-109
• /
• 2006

This study was designed to investigate the influence of Eosungcho (Houttuynia cordata Thunb) mixture on the plasma lipids of pigs. Experimental groups were divided into 3 groups: control group(0%), 5% and 10% Eosungcho feeding groups. Plasma concentration of total cholesterol, atherosclerotic index, free cholesterol and cholesteryl ester were significantly lower in the Eosungcho powder 5% and 10% feeding groups than control group. Plasma contents of HDL-cholesterol, cholesteryl ester ratio, triglyceride and phospholipid were significantly different between 10% Eosungcho feeding group and control group. Plasma concentration of LDL-cholesterol was significantly love in 10% Eosungcho feeding group($76.5{\pm}5.4mg/dL$) than in control group($86.5{\pm}5.6mg/dL$). Plasma concentration of VLDL and chylomicron were showed similar tendency to LDL-cholesterol. Also, blood sugar, GOT and GPT concentration were significantly lower in 10% Eosungcho feeding group than in control group. In control group, the ratio of saturated fatty acid to unsaturated fatty acid was 58.1 : 51.9, but in 5% and 10% Eosungcho feeding groups, those were 42.1 : 57.9 and 41.0 : 59.0, respectively. The component of main fatty acid was different between control group and Eosungcho feeding groups. In Eosungcho feeding groups, main unsaturated fatty acids were oleic acid(18:1) and linoleic acid(18:2). From the results, addition of Eosungcho powder might be effective in improving the plasma lipid components in pigs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.2
• /
• pp.49-58
• /
• 1989

For the effective utilization of anchovy as a food source, this work was undertaken the com-parison in food quality of anchovy snacks and its changes during storage at room temperature ($24\pm4^{\circ}C$). Chopped anchovy was mixed with soft flour($340.0\%$, w/w), corn starch($10.0\%$, w/w), sodium chloride($2.5\%$, w/w), monosodium glutamate($0.1\%$, w/w), sodium bicarbonate ($2.5\%$, w/w), water($5.6\%$, w/w), onion powder($0.3\%$, w/w), garlic powder($0.3\%$, w/w), red pepper powder($0.3\%$, w/w) and sodium erythorbate($0.2\%$, w/w), The mixture were rolled, aged, co沇ed, dried and finally parched or deep-fried at $190\pm10^{\circ}C$. The anchovy snacks were packed in the casted polypropylene film bag ($16cm{\times}14cm$), The changes in moisture contents, water activity, pH, volatile basic nitrogen, contents of amino acid and color values of products were negligible during storage. The results of TBA value and peroxide value showed that lipid oxidation can be retarded by adding antioxidant and spices. Judging from contents of amino acid and mineral, the products were more nutritive than the sold shrimp snack on the market. From the results of sensory evaluation and chemical experiments, the product prepared with sodium erythorbate could be preserved in good quality during storage of 120 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.235-240
• /
• 1979

A study on the amino acid composition of raw frozen krill, and krill solubles manufactured in forms of paste and powder has been carried out. The raw frozen krill was thawed, chopped, mixed and homogenized with same amount of water. The mixture was autolyzed or hydrolyzed by tile addition of $0.2\%$ pronase-p, a commercial proteolytic enzyme, to the weight of the raw frozen krill at $45^{\circ}C$ for 4 hours. After a thermal inactivation of enzymes at $95^{\circ}C$ for 15 minutes, the autolysate and the hydrolysate were centrifuged and filtered through gauzes, respectively, and then tile lipid layer in the supernatant was removed, The autolysate and the hydrolysate were finally concentrated under reduced atmospheric pressure in a rotary vacuum evaporator at $45^{\circ}C$ for 1 hour to produce the krill solubles in form of paste. The powdered krill solubles were prepared by the addition of $5\%$ starch to the autolysate and hydrolysate and by means of concentration in the rotary vacuum evaporator at $45^{\circ}C$ for 30 minutes and a forced air drying at $58^{\circ}C$ for 3 hours with a air velocity of 3m/sec. Among the amino acids in raw frozen krill, glutamic acid, lysine, and aspartic acid showed high values in quantity and then followed leucine, alanine, arginine, glycine and proline. The qnantity of histidine was very small and that of cystine was only in trace. The krill solubles in forms of paste and powder prepared by autolysis and hydrolysis with pronase-p revealed almost the same patterns in amino acid composition as in raw frozen krill. In case of free amino acids, a large quantity of it in raw frozen krill consisted of lysine, arginine, proline, alanine and leucine. The quantities of cystine, histidine and glutamic acid were, in contrast, very small. In the soluble krill paste prepared by autolysis, lysine, leucine, threonine and alanine existed in large quantities among the free amino acids and cystine, aspartic acid and histidine existed in small quantities. The contents of almost all of the free amino acids ill soluble krill paste perpared by hydrolysis with pronase-p were increased slightly as compared with those in soluble krill paste prepared by autolysis. In this product, the contents of cystine, histidine and serine were very low and lysine, leucine, arginine and proline were the dominant group in quantities among the free amino acids. The krill solubles in forms of paste and powder were not inferior to whole egg in the view point of its essential amino acid composition.

• Journal of Food Hygiene and Safety
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2009

This study was performed to investigate the effect of dried powder of chestnut on lipid metabolism, anti-thrombotic effect in rats. Thirty 5-week-old male Sprague Dawley (SD) rats were randomly allocated into five groups and used for experiment. We examined the lipid metabolism and antithrombotic capacity of SD rats administered for 5 weeks with 0.16 g/kg, 0.5 g/kg chestnut flesh powder and 0.16 g/kg, 0.5 g/kg chestnut inner shell and flesh powder mixture, respectively. Food intake, body weight gain and food efficiency ratio were also checked. The levels of serum triglyceride and tree fatty acid were not statistically significant between the all experimental groups. However, the antithrombotic capacity and total lipid levels of the treatment groups were significantly lower than those of the negative control group. These results suggest that the supplementation of chestnut on diet lower the total lipid level in SD rats.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2021

This study aimed to fundamentally understand structural changes of zeolite under pressure and in the presence of different pressure-transmitting media (PTM) for application studies such as immobilization of heavy metal cation or CO₂ storage using pressure. High-pressure X-ray powder diffraction study was conducted on the zeolite-W (K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER) to understand linear compressibility and the bulk moduli in different PTM conditions. Zeolite-w is a synthetic material having the same framework as natural zeolite merlinoite ((K, Ca_0.5, Ba_0.5, Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O). The space group of the sample was identified as I4/mmm belonging to the tetragonal crystal system. Water, carbon dioxide, and silicone-oil were used as pressure-transmitting media. The mixture of sample and each PTM was mounted in a diamond anvil cell (DAC) and then pressurized up to 3 GPa with an increment of ca. 0.5 GPa. Pressure-induced changes of powder diffraction patterns were measured using a synchrotron X-ray light source. Lattice constants, and bulk moduli were calculated using the Le-Bail method and the Birch-Murnaghan equation. In all PTM conditions, linear compressibility of c-axis (𝛽^c) was 0.006(1) GPa^-1 or 0.007(1) GPa^-1. On the other hand, the linear compressibility of a(b)-axis (𝛽^a) was 0.013(1) GPa^-1 in silicone-oil run, which is twice more compressible than the a(b)-axis in water and carbon dioxide runs, 𝛽^a = 0.006(1) GPa^-1. The bulk moduli were measured as 50(3) GPa, 52(3) GPa, and 29(2) GPa in water, carbon dioxide, and silicone-oil run, respectively. The orthorhombicities of ac-plane in the water, and carbon dioxide runs were comparatively constant, near 0.350~0.353, whereas the value decreased abruptly in the silicone-oil run following formula, y = -0.005(1)x + 0.351(1) by non-penetrating pressure fluid condition.

• Journal of the Korean Chemical Society
• /
• v.39 no.7
• /
• pp.508-512
• /
• 1995

A series of samples in the $Eu_{1-x}Sr_xCoO_{3-y}$ system has been prepared by heating the proper amount of reactant mixture to 1150$^{\circ}C$ under an ambient atmosphere, and the solid solutions are identified by X-ray powder diffraction analysis. The crystal system of samples for the compositions of x=0.00 and 0.25 are found to be orthorhombic whose local symmetry is similiar to the distorted octahedra with orthoferrite type one, whereas those of x=0.50 and 0.75 to be the cubic system, and that of x=1.00 to the orthorhombic similiar to be the brownmillerite type. The amount of $Co^{4+}$ ion (${\tau}$ value) is maximized at the composition of x=0.50, and the oxygen vacancies increase with the x value. The nonstoichiometric chemical formula of each compound could be determined from the mole ratio of $Co^{4+}$ ion and oxygen vacancies. The $Co^{3+}$ ion located in octahedral site has spin transition from low spin to high spin states with increasing temperature. Therefore, the effective magnetic moment of each samples obtained from the magnetic measurement is increased with the increasing temperature. The $EuCoO_{3.00}$ has strong antiferromagnetic interaction between the neighboring $Co^{3+}$ ions through the intermediate oxygen ions. With the increasing ${\tau}$ value, the absolute {\theta}_p$ value is decreased by the ferromagnetic interaction of $Co^{3+}-O^2-Co^{4+}$ and thus the {\theta}_p$ has positive value at x=0.50.

• Analytical Science and Technology
• /
• v.10 no.3
• /
• pp.187-195
• /
• 1997

Chemically modified electrodes(CMEs) for Ag(I) were constructed by incoporating 1,5,9,13-tetrathiacyclohexadecane([16]-ane-$S_4$) with a conventional carbon-paste mixture composed of graphite powder and nujol oil. Ag(I) ion was chemically deposited onto the surface of the modified electrode with [16]-ane-$S_4$ by immersion of the electrode in the acetate buffer solution(pH=4.5) containing $5.0{\times}10^{-4}M$ Ag(I) ion. And then the electrode deposited with Ag(I) was reduced at -0.3V vs. S.C.E. Well-defined stripping voltammetric peaks could be obtained by scanning the potential to the positive direction. The CME surface was regenerated with exposure to 0.1M $HNO_3$ solution and was reused for the determination of Ag(I) ion. When deposition/measurement/regeneration cycles were 10 times, the response could be reproduced with relative standard deviation of 6.08%. In case of differential pulse stripping voltammetry, the calibration curve for Ag(I) was linear over the range of $5.0{\times}10^{-7}{\sim}1.5{\times}10^{-6}M$. And the detection limit was $2.0{\times}10^{-7}M$. Various ions such as Cd(II), Ni(II), Pb(II), Zn(II), Mn(II), Mg(II), EDTA, and oxalate(II) did not influence the determination of Ag(I) ion, except Cu(II) ion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.245-251
• /
• 2015

We have applied mechanical alloying (MA) to produce soft magnetic composite material using a mixture of elemental $Fe_2O_3$-Mg powders. An optimal milling and heat treatment conditions to obtain soft magnetic ${\alpha}$-Fe/MgO composite with fine microstructure were investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that ${\alpha}$-Fe/MgO composite powders in which MgO is dispersed in ${\alpha}$-Fe matrix are obtained by MA of $Fe_2O_3$ with Mg for 30 min. The saturation magnetization of ball-milled powders increases with increasing milling time and reaches to a maximum value of 69.5 emu/g after 5 h MA. The magnetic hardening due to the reduction of the ${\alpha}$-Fe grain size by MA was also observed. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine at $800{\sim}1000^{\circ}C$ under 60 MPa. X-ray diffraction result shows that the average grain size of ${\alpha}$-Fe in ${\alpha}$-Fe/MgO nanocomposite sintered at $800^{\circ}C$ is in the range of 110 nm.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.73-83
• /
• 2006

The dried needles (1.5 kg) of Abies koreana and Abies holophylla were ground, extracted with acetone-$H_2O$ (7:3, v/v), concentrated, and fractionated with a series of hexane, methylene chloride, ethyl acetate and water on a separatory funnel. Each fraction was freeze dried, then a portion of ethyl acetate soluble powder was chromatographed on a Sephadex LH-20 column using a series of aqueous methanol and ethanol-hexane mixture as eluents. The isolated compounds were identified by cellulose TLC, $^1H$, $^{13}C-NMR$, COSY, HETCOR, FAB and EI-MS. The needles of Abies koreana and Abies holophylla contained a large amount of aromadendrin-7-O-${\beta}$-D-glucopyranoside (compound III), polydatin (compound VI), (-)-rhododendrol-2-O-${\beta}$-D-glucopyranoside (compound VII), in addition to a small amount of (+)-catechin (compound I), kaempferol-3-O-${\beta}$-D-glucopyranoside (compound IV), myricetin-3-O-${\beta}$-D-glucopyranoside (compound V), naringenin-7-O-${\beta}$-D-glucopyranoside (compound II). DPPH analysis was also tested to investigate the antioxidative effects on the isolated compounds and (+)-catechin and polydatin were effective.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.543-550
• /
• 2011

Conductive SiC-$ZrB_2$ composites were produced by subjecting a 40:60 (vol%) mixture of zirconium diboride (ZrB2) powder and ${\beta}$-silicon carbide (SiC) matrix to spark plasma sintering (SPS). Sintering was carried out for 5 min in an argon atmosphere at a uniaxial pressure and temperature of 50 MPa and $1500^{\circ}C$, respectively. The composite sintered at a heating speed of $25^{\circ}C$/min and an on/off pulse sequence of 12:2 was denoted as SZ12L. Composites SZ12H, SZ48H, and SZ10H were obtained by sintering at a heating speed of $100^{\circ}C$/min and at on/off pulse sequences of 12:2, 48:8, and 10:9, respectively. The physical, electrical, and mechanical properties of the SiC-$ZrB_2$ composites were examined and thermal image analysis of the composites was performed. The apparent porosities of SZ12L, SZ12H, SZ48H, and SZ10H were 13.35%, 0.60%, 12.28%, and 9.75%, respectively. At room temperature, SZ12L had the lowest flexural strength (286.90 MPa), whereas SZ12H had the highest flexural strength (1011.34 MPa). Between room temperature and $500^{\circ}C$, the SiC-$ZrB_2$ composites had a positive temperature coefficient of resistance (PTCR) and linear V-I characteristics. SZ12H had the lowest PTCR and highest electrical resistivity among all the composites. The optimum SPS conditions for the production of energy-friendly SiC-$ZrB_2$ composites are as follows: 1) an argon atmosphere, 2) a constant pressure of 50 MPa throughout the sintering process, 3) an on/off pulse sequence of 12:2 (pulse duration: 2.78 ms), and 4) a final sintering temperature of $1500^{\circ}C$ at a speed of $100^{\circ}C$/min and sintering for 5 min at $1500^{\circ}C$.