• 한국분말재료학회지
• /
• 제16권2호
• /
• pp.85-90
• /
• 2009

Magnesium and its alloys are attractive as light weight structural/functional materials for high performance application in automobile and electronics industries due to their superior physical properties. In order to obtain high quality products manufactured by the magnesium powders, it is important to control and understand the densification behavior of the powders. The effect of the sheath surrounding the magnesium powders on the plastic deformation and densification behavior during equal channel angular pressing was investigated in the study by experimental and the finite element methods. A modified version of Lee-Kim's plastic yield criterion, notably known as the critical relative density model, was applied to simulate the densification behavior of magnesium powders. In addition, a new approach that extracts the mechanical characteristics of both the powder and the matrix was developed. The model was implemented into the finite element method, with which powder compaction under equal channel angular pressing was simulated.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.355-359
• /
• 2006

Fine silica powders were synthesized via w/o emulsion method using sodium silicate, ammonium sulfate, Triton N-57, and cyclohexane as silica source, precipitating agent, surfactant, and oil phase, respectively. The powders were prepared under a conventional process and an ultrasonic process using the same reactants at room temperature for 1 hr varying the concentration of $Na_2SiO_3$ solution and the mol ratio of $H_2O$/surfactant, respectively. The particle size of the silica powder was reduced with decreasing the concentration of sodium silicate solution and with increasing the mol ratio of $H_2O$/surfactant under with and without ultrasounds. The size of powder with ultrasounds was smaller than that without ultrasounds, which indicates that the application of ultrasound in the synthesis of silica powder is an efficient way to reduce particle size.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.17-22
• /
• 2002

This Waterproofing Material which mainly consisted of 2 components of waste tire chip powder and waste glass powder. This Study is abut development of waterproofing Material, There is not tried in domestic. The most Motive of this Study wishes to recycle resources and get the economic performance for waterproofing Material The result of this Study is as followings. (1) Dense waterproofing floor is formed between waste tire chip by Coupling Agent(the most effective method to encourage adhesive strength and raise cohesion of material by combination.) (2) Expected to bring effect to shorten construction period at spot application potentially space-time in moisture aspect. Also, shortening effect of construction period and spot work are considered to be gone efficiently selecting pre-mix construction method. (3) This development Waterproofing material has elasticity that nature side compatibility of cement ingredient and plastic Emulsion have when utilize and constructs waite resources (being waste tire chip and waste glass powdered).

• 유기물자원화
• /
• 제10권4호
• /
• pp.81-85
• /
• 2002

유박을 원료로 한 유기질비료, 미생물제제 및 해초추출물의 시용효과를 규명하기 위하여 엇갈이배추를 공시작물로 시설하우스에서 재배하면서 생육 및 수량을 조사하였다. 유기질비료 처리구에 미생물제제를 혼용한 처리구에서 수량이 가장 좋았으며, 과량 처리구에서도 비해가 발생하지 않았다. 해초추출물의 엽면시비와 관주에 의한 수량증대는 관주처리구가 다소 높았으며, 또한 미생물제제의 경우 액상보다 분말처리구에서 수량이 높게 나타났다. 즉, 미생물제제의 형태에 있어서는 분말이 해초추출물의 시용방법에 있어서는 관주에 의해 생육이 안정되었으며, 수량도 높은 경향을 보였다. 결론적으로 유기질비료의 2배 과량처리구에서 비해가 발생되지 않았으며, 미생물제제와 해초추출물의 시용으로 생육 및 수량이 향상되었다.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.351-356
• /
• 2017

Tin dioxide nanoparticles are prepared using a newly developed synthesis method of plasma-assisted electrolysis. A high voltage is applied to the tin metal plate to apply a high pressure and temperature to the synthesized oxide layer on the metal surface, producing nanoparticles in a low concentration of sulfuric acid. The particle size, morphology, and size distribution is controlled by the concentration of electrolytes and frequency of the power supply. The as-prepared powder of tin dioxide nanoparticles is used to fabricate a gas sensor to investigate the potential application. The particle-based gas sensor exhibits a short response and recovery time. There is sensitivity to the reduction gas for the gas flowing at rates of 50, 250, and 500 ppm of $H_2S$ gas.

• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.28-33
• /
• 2019

The gas sensor is essential to monitoring dangerous gases in our environment. Metal oxide (MO) gas sensors are primarily utilized for flammable, toxic and organic gases and $O_3$ because of their high sensitivity, high response and high stability. Tungsten oxides ($WO_3$) have versatile applications, particularly for gas sensor applications because of the wide bandgap and stability of $WO_3$. Nanosize $WO_3$ are synthesized using the hydrothermal method. As-prepared $WO_3$ nanopowders are in the form of nanorods and nanorulers. The crystal structure is hexagonal tungsten bronze ($MxWO_3$, x =< 0.33), characterized as a tunnel structure that accommodates alkali ions and the phase stabilizer. A gas detection test reveals that $WO_3$ can detect acetone, butanol, ethanol, and gasoline. This is the first study to report this capability of $WO_3$.

• 한국식품조리과학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2016

This study aimed to enhance the applications of dates as a food material that can be utilized and stored easily by improving the inefficient process of the traditional cooking procedure. To this end, this study investigated the physico-chemical and nutritional properties of jujube pulp powder, and compared the traditional and newly developed methods of making yakbap, yakpyon, and jujube porridge. According to the analysis of physical and chemical properties, the jujube pulp powder contained 5.4% moisture, 2.6% crude ash, 6.6% crude protein, 0.35% crude fat, and 4.7% crude fiber. The water activity was 0.95% in jujube pulp while it was 0.24% in jujube pulp powder. In addition, the jujube pulp powder had a total sugar content of 70.4% and reducing sugar content of 6.3%. The vitamin C was content was estimated to be 68.5 mg/100 g in the jujube pulp powder and the jujube pulp contained 6.2 g/100 g of dietary fiber. Major minerals were K, Mg, and Ca. After appointing jujube pulp powder (new method) to a test group and jujube pulp (traditional method) to a control group, the sensory evaluation and acceptance testing were conducted for yakbap, yakpyon, and jujube porridge. As a result, there was no significant difference in any sensory factors tested (p<0.05). It was found that making and storing jujube pulp powder by drying jujube pulp is a useful way of utilizing jujube because Yakbab, Yakpyun and jujube porridge were found to have a relatively good appearance, color, flavor, taste, texture and overall acceptance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.50-50
• /
• 2006

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.99-102
• /
• 2002

The BSCCO superconductor materials of using Self-propagating High-temperature Synthesis (SHS) were studied. Mechano-chemical activation - as a pre-treatment of the reactants mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product. In this paper as an effort for fabricating the SHSed BSCCO superconductor powder SHS method was considered to application in the synthesis of superconducting materials.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.151-156
• /
• 2003

In the present work some properties of nanopowders and possible areas of their applications are discussed. Main attention is paid to the use of nanodispersed powders (NDP) in new materials production technologies.