• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.15-21
• /
• 2013

The detection characteristics of irradiated spices were investigated depending on radiation sources and doses by photostimulated luminescence (PSL) and Thermoluminescence (TL). 6 kinds of spices (turmeric, onion powder, red pepper, basil, parsley, black pepper) were irradiated at 0 to 10 kGy under ambient conditions by both a $^{60}Co$ gamma irradiator and an electron beam (EB) accelerator, respectively. The PSL analysis showed negative results for non-irradiated spices, while irradiated spices gave intermediate and positive value, which presented the limited potential of PSL technique. In TL measurement, TL glow curves on non-irradiated samples appeared at about $300^{\circ}C$ with low intensity. All irradiated samples were easily distinguishable through radiation-specific strong TL glow curves with maximum peak in range of $150{\sim}200^{\circ}C$. TL ratio ($TL_1/TL_2$) obtained by a re-irradiation step could verify the detection result of $TL_1$ glow curves, showing ratios lower than 0.1 in the non-irradiated sample and higher than 0.1 in irradiated ones. Therefore, in PSL measurement, the identification of irradiated spices showed more clear results in electron beam irradiated samples. TL analysis showed obvious difference between non-irradiated and irradiated samples in gamma ray and electron beam irradiated samples.

• Proceedings of the KSEEG Conference
• /
• 2002.06a
• /
• pp.81-100
• /
• 2002

While most of regulatory communities in abroad recognize ' 'natural attenuation " to include degradation, dispersion, dilution, sorption (including precipitation and transformation), and volatilization as governing Processes, regulators prefer "degradation" because this mechanism destroys the contaminant of concern. Unfortunately, true degradation only applies to organic contaminants and short- lived radionuclides, and leaves most metals and long-lived radionuclides. The natural attenuation Processes may reduce the potential risk Posed by site contaminants in three ways: (i)contaminants could be converted to a less toxic form througy destructive processes such as biodegradation or abiotic transformations; (ii) potential exposure levels may be reduced by lowering concentrations (dilution and dispersion); and (iii) contaminant mobility and bioavailability may be reduced by sorption to geomedia. In this review, authors will focus will focul on "sorption" among the natural attenuation processes of hazardous inorganic contaminants including radionuclides. Note though that sorption and transformation processes of inorganic contaminants in the natural setting could be influenced by biotic activities but our discussion would limit only to geochemical reactions involved in the natural attenuation. All of the geochemical reactions have been studied in-depth by numerous researchers for many years to understand "retardation" process of contaminants in the geomedia. The most common approach for estimating retardation is the determination of distrubution coefficiendts ($K_{d}$) of contaminants using parametric or mechanistic models. As typocally used in fate and contaminant transport calculations such as predictive models of the natural attenuation, the $K_{d}$ is defined as the ratio of the contaminant concentration in the surrounding aqueous solution when the system is at equilibrium. Unfortunately, generic or default $K_{d}$ values can result in significant error when used to predict contaminant migration rate and to select a site remediation alternative. Thus, to input the best $K_{d}$ value in the contaminant transport model, it is essential that important geochemical processes affecting the transport should be identified and understood. Precipitation/dissolution and adsorption/desorption are considered the most important geochemical processes affecting the interaction of inorganic and radionuclide contaminants with geomedia at the near and far field, respectively. Most of contaminants to be discussed in this presentation are relatively immobile, i.e., have very high $K_{d}$ values under natural geochemical environments. Unfortunately, the obvious containment in a source area may not be good enough to qualify as monitored natural attenuation site unless owner demonstrate the efficacy if institutional controls that were put in place to protect potential receptors. In this view, natural attenuation as a remedial alternative for some of sites contaminated by hazardous-inorganic components is regulatory and public acceptance issues rather than scientific issue.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.194-202
• /
• 2018

Health impact assessment in South Korea is carried out within the framework of Environmental Impact Assessment (EIA). And, public health and hygiene items in EIA as an evaluation of health impact items were designed to calculate the emission level of hazardous air pollutants from specific development projects, and the exposure concentration at major sites, and to assess the health risk associated with these projects. But, the assessment of the receptor characteristics around the development project is limitedly considered. The purpose of this study is to propose the method of calculation of potential exposed population and the use of it for public health and hygiene items in EIA. The data for the calculation of potential exposed population in South Korea were identified. And the calculation algorithm based on them was proposed. After that, in a development of industrial complex, a case analysis was carried out assuming the release of hazardous air pollutants. This study suggested that the concept of population risk should be applied in risk assessment utilizing the potential exposed population and as a future study, a standard of assessment of health effects for population risk should be established. Finally, the possibility of using this study as a location-limiting tool for the development project was presented through the method of calculating the potential exposed population. It is meaningful that this study presented a method for performing risk assessment from the perspective of receptors around a development project.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.235.2-236
• /
• 2002

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring mode followed by three work-up methods for comparison: EPA method, isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in water samples were extracted with dichloromethane. (omitted)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.224-227
• /
• 2001

In general, municipal solid waste incinerator fly ash (MSWIF) has a potential hazardous leaching of heavy metal with subsurface environment variation. Therefore, to remove the heavy metal from MSWIF electrokinetic technology were used. With constant current density condition heavy metals in MSWIF removed by ion migration. During 7 days operation 40~80% of Cr, Cd and As were removed and longer operation, 14 days treatment, showed 35~100% removal efficiency.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.193-200
• /
• 2000

Hazard and operability Review(HAZOP) is widely used as a process safety analysis which systematically identifies potential process deviations and settles the problems. In this paper, we carried out a process hazard analysis using HAZOP in K chemical plant. As a result, we showed that the plant could be operated more safely and be saved a lot of money by eliminating several existing hazardous factors through the change of processes and designs.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.129-139
• /
• 2000

Hazard and operability Review(HAZOP) is widely used as a process safety analysis which systematically identifies potential process deviations and settles the problems. In this paper, we carried out a process hazard analysis using HAZOP in K chemical plant. As a result, we showed that the plant could be operated more saftly and be saved a lot of money by eliminating several existing hazardous factors through the change of processes and designs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.5999-6003
• /
• 2014

Pesticides used in Korea are grouped by four classes of hazard (extremely, highly, moderately and slightly hazardous) based on acute oral and dermal toxicity in the rat. However, there is little information of carcinogenic effects. The aim of this study was to evaluate potential carcinogenicity for active ingredients of pesticides used in Korea. A total of 1,283 pesticide items were registered under the Pesticide Control Act of which 987 were commercially available. Of these 987 items, 360 active ingredients not duplicated were evaluated for carcinogenicity using the carcinogen list established by the US Environmental Protection Agency (EPA). Some 25 out of 360 ingredients were classified as likely to be carcinogenic (probable) to humans and 52 had suggestive evidence of carcinogenic potential (suspected) based on the US EPA classification. Some 31% of 987 items contained probable or suspected human carcinogenic ingredients. Carcinogenic pesticides accounted for 24% (5,856/24,795 tons) of the total volume of consumption in Korea. Interestingly, pesticides with lower acute toxicity were found to have higher carcinogenic potential. Based on these findings, the study suggests that it is important to provide information on long-term toxicity to farmers, in addition to acute toxicity data.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.516-524
• /
• 2022

The construction industry is considered the most hazardous industry globally. Therefore, safety education is crucial for raising the safety awareness of construction workers working at construction sites and creating a safe working environment. However, the current safety education method and tools cannot provide trainees with realistic and practical experiences that might help better safety awareness in practice. A metaverse, a real-time network of 3D virtual worlds focused on social connection, was created for more interactive communication, collaboration, and coordination between users. Several previous studies have noted that the metaverse has excellent potential for improved safety education performance, but its required functions and practical applications have not been thoroughly researched. In order to fill the research gap, this paper reviewed the potential benefits of a metaverse based on the current research and suggested its application for safety education purposes. This paper scrutinized the metaverse's key functions, particularly its information and knowledge sharing function and reality capture function. Then, the authors created a metaverse prototype based on the two key functions described above. The main contribution of this paper is reviewing the potential benefits of a metaverse for safety education. A realistic and feasible metaverse platform should be developed in future studies, and its impact on safety education should be quantitatively verified.

• Analytical Science and Technology
• /
• v.25 no.4
• /
• pp.257-264
• /
• 2012

Penicillins belong to the ${\beta}$-lactam class of antibiotics, and are frequently used in human and veterinary medicine. Despite the positive effects of these drugs, improper use of penicillins poses a potential health risk to consumers. This study has been undertaken to determinate multi-residues of penicillins, including amoxicillin, ampicillin, oxacillin, bezylpenicillin, cloxacillin, dicloxacillin, and nafcillin, using liquid chromatographic tandem mass spectrometer (LC-MS/MS). The developed method was validated for specificity, precision, recovery, and linearity in livestock and marine products. The analytes were extracted with 80% acetonitrile and clean-up by a single reversed-phase solid-phase extraction step. Six penicillins presented recoveries higher than 76% with the exception of Amoxicillin. Relative standard deviations (RSDs) were not more than 10%. The method was applied to 225 real samples. Benzylpenicillin was detected in 12 livestock products and 7 marine products. Amoxicillin, ampicillin, cloxacilllin, dicloxacillin, nafcillin and oxacillin were not detected. The detected levels were 0.001~0.009 mg/kg in livestock products excluding eggs and milk. In marine products, the detected levels were under 0.03 mg/kg. They were under the MRL levels. As monitoring results, it is identified to be safe but it is considered that safety management of antibiotics should continue by monitoring.