• 한국환경보건학회지
• /
• 제33권4호
• /
• pp.242-249
• /
• 2007

Indoor air quality has become a topic of interest and concern. Especially changes in construction design and the increased use of synthetic products may result in an increasing of complaints and health effects about the quality of indoor air at home. In this study, nitrogen dioxide($NO_2$) and volatile organic compounds(VOCs) within new and established apartments on the basis of 4 years of building year were measured every 3 days consecutively during 60 days. We selected each 10 house in Seoul, Asan and Daegu, respectively, and produced risk numbers for hazard quotients, and predicted increases in incidence of cancer. The calculations were made for the adult with default exposure values and also made for a worst case scenario using Monte-Carlo simulation as describing the reasonable exposure(RME). Mean of Monte carlo analysis by benzene, in the construction under 4 years (male: $9.2{\times}10^{-5}$, female: $1.0{\times}10^{-4}$) and over 4 years (male: $6.8{\times}10^{-5}$, female: $8.3{\times}10^{-5}$) exceeded $10^{-6}$ of permitted standards in US EPA, RME of Monte carlo analysis. In construction under 4 yews (male: $9.9{\times}10^{-3}$, female: $9.6{\times}10^{-3}$) and over 4 years (male: $9.8{\times}10^{-3}$, female: $7.8{\times}10^{-3}$) exceeded $10^{-4}$ of maximum permitted standards in US EPA. The hazard index of non-carcinogenic pollutants by nitrogen dioxide, toluene, m,p-xylene and o-xylene, both male and female in apartment constructed under 4 yews and over 4 years was found less than the permitted standards of hazardous health effects in CTE. Significant cancer risks and non-cancer hazard quotients were predicted in under 4 yews of building year.

• The Plant Pathology Journal
• /
• 제27권3호
• /
• pp.266-271
• /
• 2011

Physicochemical characteristics and heavy metal content of soils located along the drainage way of an abandoned mine at Busan, Korea ($35^{\circ}31'N$, $129^{\circ}22'E$) (contaminated soil; CS) and uncontaminated soils (50-70 m apart from the drainage way) (NS) were examined. Growth of tomato plants (Solanum lycopersicom cv. Rutgers) in CS and NS, development of the root-knot nematode (Meloidogyne incognita) as root-knot gall formation on tomato plants, and non-parasitic nematode populations in soil were also examined. Growth of tomato plants, root-knot gall formation, and non-parasitic nematode populations were significantly reduced in CS with higher As content, lower pH, higher electrical conductivity (EC), and lower available phosphate (av. $P_2O_5$) than in NS. None of the other physicochemical characters examined differed significantly between CS and NS (low and no significance) and were above or below the critical levels detrimental to plant growth and nematode development, suggesting that As may be the primary hazardous heavy metal in CS. The toxicity of As might be enhanced at low pH in CS because exchangeable forms of some heavy metals increase with the decrease of soil pH. The heavy metals, especially As, may have contributed to increasing EC and decreasing av. $P_2O_5$. Therefore, the effects of mine drainage contamination from the abandoned mine were derived primarily from contamination by heavy metals such as As. These may have been enhanced in toxicity (solubility) by the lowered pH, increased soil salinity (EC) and decreased av. $P_2O_5$. Our results suggest synergistic adverse effects on the plant and the nematode by decreasing osmotic potential and nutrient availability.

• Wind and Structures
• /
• 제20권6호
• /
• pp.739-749
• /
• 2015

Field measurement of wind characteristics is of great significance for the wind engineering community. High-frequency anemometers such as ultrasonic anemometers are widely used to obtain the high-frequency fluctuating wind speed time history. However, conventional instrumentation systems may suffer from low efficiency, non-real time transmission and higher maintenance cost, and thus are not very appropriate in the field measurement of strong winds in remote areas such as mountain valleys. In order to improve the field measurement performance in those remote areas, a wireless high-frequency anemometer instrumentation system for field measurement has been developed. In this paper, the architecture of the proposed instrumentation system, and measured data transmission and treatment will be presented firstly. Then a comparison among existing instrumentation systems and the proposed one is made. It shows that the newly-developed system has considerable advantages. Furthermore, the application of this system to the bridge site located in the mountain valley is discussed. Finally, typical samples of measured data from this area are presented. It can be expected that the proposed system has a great application potential in the wind field measurement for remote areas such as the mountainous or island or coastal area, and hazardous structures such as ultra-voltage transmission tower, due to its real-time transmission, low cost and no manual collection of data and convenience.

• Reproductive and Developmental Biology
• /
• 제32권2호
• /
• pp.123-126
• /
• 2008

The objective of this study was to determine the potential hazardous effects of sorting process by flowcytometry on the quality of boar spermatozoa by flowcytometer. Freshly collected boar semen was diluted and divided into two groups; control none sorted and sorted. Sperms in sorted group were processed with flowcytometer for cell sorting with $100\;{\mu}M$ nozzle under the 20 psi pressure. Measurements on each parameter were made at two time points, 0hr (right after sorting) and 24 hr post sorting. Although there was a tendency of lower viability in sorted group than none sorted control group, the percentage of live cells in control ($75.83{\pm}6.92\;&\;59.53{\pm}10.34$) was not significantly different from sorted ($59.70{\pm}7.37\;&\;43.97{\pm}3.76$) at both 0 and 24 hr post sorting. However, sorted sperm showed significantly lower mitochondrial function compared to the control at both 0 h ($79.37{\pm}3.22\;vs.\;63.50{\pm}10.05$) and 24 hr ($67.27{\pm}3.22$ vs. $46.97{\pm}5.37$) time points (p<0.007). Sperm DNA fragmentation rate was significantly lower in control ($22.0{\pm}7.04$) than that of sorted ($32.27{\pm}7.49$) at 24 hr time point (p<0.0002). Taken together, these data suggested thatsorting process by flowcytometer may have influenced sperm motility rather than viability. Also high speed sperm sorting by flowcytometer has significant effects on DNA fragmentation on elapsed time after sorting.

• 터널과지하공간
• /
• 제16권6호
• /
• pp.451-466
• /
• 2006

DOM 시추코어에서 측정된 불연속면의 위치 및 방향성 자료를 이용하여 현장암반의 구조적 특성을 고려한 사면거동 해석이 가능하였다. 3차원 공간에서 설정된 절리들의 위치에 의거하여 붕락 현상이 발생된 개착사면의 추가적인 파괴양상을 예측하였으며, 개별 절리면의 붕락위해 가능성과 개착면 상에서의 trace 위치를 파악하여 세부적인 사면거동 양상을 파악하였다. 개착사면 횡단면에서 개별절리들의 파괴거동 양상과 사면체 블록형성을 대수학적으로 산출하여 사면 붕락심도를 규명하였다. 현장사면에 자동화 계측시스템을 설치하여 사면 거동에 대한 계측자료를 수집하였으며, DOM 시추공 내에 지중경사계를 설치하여 사면거동 양상을 횡단면 해석 결과와 대비시켜 분석하였다. 지중경사계를 이용하여 측정된 개착면의 표면변위 자료에 의거하여 사면 파괴시기를 예측할 수 있는 방법론을 고찰하였으며, 강우가 사면거동에 끼치는 영향성을 분석하였다.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.431-443
• /
• 2005

This study was performed to investigate the perceptions of the opinion leaders, such as government officials, researchers, NGO workers, and journalists on the risks of endocrine disrupters (EDs) and genetically modified organisms (GMOs) as well as the related policies on these two hazards or potential hazards. The opinion leaders generally considered the EDs as the most serious hazard among twenty-one environmental health hazards in Korea, and agreed that the EDs would continuously be the most serious hazard. On overall average, the GMOs were ranked the 11th among the twenty-one health hazards. Further investigation indicated that the GMOs were variously ranked by the group of respondents: they were ranked the 2nd by the NGO workers, the 7th by the journalists, the 9th by the researchers and the 11th by the government officials. In general, the respondents considered the dioxin as a hazard with the highest risk while the GMOs were considered less hazardous. The opinion leaders considered that although the risks of the GMOs and EDs were not fully verified, the risks should be controlled through the legislation. The EDs and GMOs should be separately regulated for the time being, while the EDs should put under more strengthened regulation. It is recommended that a web-site containing the information on the EDs and the GMOs be prepared for the journalists. In addition, a training program in relation to the EDs and the GMOs needs to be organized by the Korean Press Foundation and the Korea Food and Drug Administration to educate the journalists. A committee consisting of government officials, scientists, and NGO workers needs to be established, and it should provide framework of future policies and public relations programs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1678-1683
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Although DBD high electron density and energy, its potential use as nano and sub-micron sized particle charging are not well known. Aim of this work is to determine design and operating parameters of a two-stage ESP with DBD. DBD and ESP are used as particle charger and precipitator, respectively. We measured particle precipitation efficiency of two-stage ESP and estimated ozone decomposition of both pelletized $MnO_2$ catalyst and pelletized activated carbon. To examine the particle precipitation efficiency, nano and sub-micron sized particles were generated by a tube furnace and an atomizer. AC voltage of $7{\sim}10$ kV(rms) and 60 Hz is used as DBD plasma source. DC -8 kV is applied to the ESP for particle precipitation. The overall particle collection efficiency for the two-stage ESP with DBD is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized $MnO_2$ catalyst or pelletized activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• Geomechanics and Engineering
• /
• 제8권5호
• /
• pp.727-739
• /
• 2015

Reclamation of closed dumping grounds is a potential solution to solve land scarce problems. Traditional geotechnical investigations of closed dumping grounds face some problems, such as the emission of hazardous liquids and gases, and the lack of ground information due to the discontinuity between two boreholes. Thus, noninvasive and continuous investigation methods are needed to supplement traditional geotechnical investigations. In this paper, two types of geophysical investigation methods, Seismic Analysis of Surface Waves (SASW) and 2D Resistivity, were carried out to study noninvasive and continuous site investigations for dumping grounds. The two geophysical methods are able to profile the distribution of physical properties of the fill and original materials, by which the extent of the dumping ground can be found and some anomalies in the subsurface can be located. Boreholes were used to assist in locating the dumping material-ground interfaces. The results show that dumping material-ground interfaces obtained from the two geophysical methods are roughly consistent. Moreover, attempt is made in the paper to use the geophysical methods to classify the types of dumping materials. The results show that the classification of dumping materials using the geophysical methods follows the results of the manual sorting of the dumping materials from a borehole.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.69-69
• /
• 2017

For several decades, industrial processes consume a huge amount of raw water for various objects that consequently results in the generation of large amounts of wastewater. There effluents are mainly treated by conventional technologies such are aerobic, anaerobic treatment and chemical coagulation. But, there processes are not suitable for eliminating all hazardous chemical compounds form wastewater and generate a large amount of toxic sludge. Therefore, other processes have been studied and applied together with these techniques to enhance purification results. These techniques include photocatalysis, absorption, advanced oxidation processes, and ozonation, but also have their own drawbacks. In recent years, electrochemical techniques have received attention as wastewater treatment process that show higher purification results and low toxic sludge. There are many kinds of electrode materials for electrochemical process, among them, boron doped diamond (BDD) attracts attention due to good chemical and electrochemical stability, long lifetime and wide potential window that necessary properties for anode electrode. So, there are many researches about high quality BDD, among them, researches are focused BDD on Si substrate. But, Si substrate is hard to apply electrode application due to the brittleness and low life time. And other substrates are also not suitable for wastewater treatment electrode due to high cost. To solve these problems, Ti has been candidate as substrate in consideration of cost and properties. But there are critical issues about adhesion that must be overcome to apply Ti as substrate. In this study, to overcome this problem, TiN interlayer is introduced between BDD and Ti substrate. TiN has higher electrical and thermal conductivity, melting point, and similar crystalline structure with diamond. The TiN interlayer was deposited by reactive DC magnetron sputtering (DCMS) with thickness of 50 nm, $1{\mu}m$. The microstructure of BDD films with TiN interlayer were estimated by FE-SEM and XRD. There are no significant differences in surface grain size despite of various interlayer. In wastewater treatment results, the BDD electrode with TiN (50nm) showed the highest electrolysis speed at livestock wastewater treatment experiments. It is thought to be that TiN with thickness of 50 nm successfully suppressed formation of TiC that harmful to adhesion. And TiN with thickness of $1{\mu}m$ cannot suppress TiC formation.

• 한국작물학회지
• /
• 제55권4호
• /
• pp.357-364
• /
• 2010

Kjeldahl method used in many materials from various plant parts to determine protein contents, is laborious and time-consuming and utilizes hazardous chemicals. Near-infrared (NIR) reflectance spectroscopy, a rapid and environmentally benign technique, was investigated as a potential method for the prediction of protein content. Near-infrared reflectance spectra(1100-2400 nm) of coarse cereal grains(n=100 for each germplasm) were obtained using a dispersive spectrometer as both of grain itself and flour ground, and total protein contents determined according to Kjeldahl method. Using multivariate analysis, a modified partial least-squares model was developed for prediction of protein contents. The model had a multiple coefficient of determination of 0.99, 0.99, 0.99, 0.96 and 0.99 for foxtail millet, sorghum, millet, adzuki bean and mung bean germplasm, respectively. The model was tested with independent validation samples (n=10 for each germplasm). All samples were predicted with the coefficient of determination of 0.99, 0.99, 0.99, 0.91 and 0.99 for foxtail millet, sorghum, millet, adzuki bean and mung bean germplasm, respectively. The results indicate that NIR reflectance spectroscopy is an accurate and efficient tool for determining protein content of diverse coarse cereal germplasm for nutrition labeling of nutritional value. On the other hands appropriate condition of cereal material to predict protein using NIR was flour condition of grains.