• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.1-5
• /
• 1991

This study was conducted to examine the effect of the addition of calcium acetate and/or potassium sorbate on the characteristics of kakdugi(Korean seasoned pickles of cubed radish roots) fermented at $20^{\circ}C$ for 4 days or more. The sensory characteristics, pH, titratable acidity, non-volatile organic acids and texture by Instron were measured. The results of sensory evaluation on kakdugi stored at $20^{\circ}C$ for 4 days indicated that firmness, toughness, crispness, sour taste and overall desirability were increased by the addition of calcium acetate. Potassium sorbate was evaluated to decrease the sourness. Titratable acidity, pH and the amount of non-volatile organic acids were higher in samples containing calcium acetate than in other ones. Compression test with Instron gave the similiar result to sensory evaluation in the measurement of firmness. Calcium acetate and potassium sorbate showed synergistic effect greatly on the textural characteristics on kakdugis.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.25-34
• /
• 2016

OBJECTIVES : This is a basic research for the domestic production of airport-airside deicers. This research selected basic materials for deicers appropriate for the pavement of domestic airports by evaluating the deicing performances of basic materials used in international-standard airport deicers and their impacts on pavements. METHODS : Laboratory investigation was conducted to evaluate the asphalt surface tensile strength, concrete scaling impact, ASR impact, and deicing performances of sodium formate (NaFm), potassium formate (KFm), sodium acetate (NaAc), and potassium acetate (KAc), which are the basic de-icing materials commonly used at international airports, approved by the FAA. In addition, the analyses were also performed on the airside deicer urea, which is currently used in domestic airports. RESULTS : Laboratory investigation confirmed that sodium formate, potassium formate, sodium acetate, and potassium acetate had superior surface tensile strength, concrete scaling impact, and deicing performance compared to airside urea, but they also had greater impacts on concrete ASR. Among these materials, sodium formate had the best asphalt surface tensile strength, concrete scaling impact, and deicing performance, while also having the greatest impact on ASR; hence, mitigation plans for ASR were needed, if it were to be used as airport-airside deicer. CONCLUSIONS : It is necessary to consider additional additives to prevent ASR of concrete pavements when developing airport-airside deicers using sodium formate, potassium formate, sodium acetate, and potassium acetate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.895-903
• /
• 2001

Evaporation cooling phenomena of droplets containing fire suppression agents on a hot metal surface were experimentally investigated. Solution of water containing potassium acetate (30-50% by weight) and sodium bromide (10-30% by weight) were used in the experiments, and surface temperatures were ranged from 70-116$^{\circ}C$. The evaporation time of the droplet on the heated surface was determined by using frame-by-frame analysis of the video records. It is found that the apparent evaporation time is shorter in turns of pure water, sodium bromide solution and potassium acetate solution. However, the time averaged heat flux is higher in turns of pure water, sodium bromide solution and potassium acetate solution. In-depth temperature variation of the hot metal does not occur significantly by the kinds of additive.

• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.149-157
• /
• 1987

This study was undertaken to investigate the differentiation, from spore germination to hyphae growth and phialide formation, of Aspergillus niger through the method of synchronous and submerged culture. Through continuous experiments by shake culture with potassium acetate medium, we observed the formation of spores at appropriate concentration and pH. Potassium acetate medium was set pH 5.5, 6.0, 6.5 and 7.0 on each scale, and control, 20 mM, and 40 mM, 80 mM and 160 mM concentrations on the other scale. Aspergillus niger was cultured in the defined media at $28^{\circ}C$, and mycelial dry weight, changes of pH and the onset of sporulation were checked. The mycelial dry weight, increased in potassium acetate medium, and pH increased during mycelial growth and gradually decreased after the spore formation. When pH increased excessively in Potassium acetate medium with pH 7.0, the mycelia could not adapt and mycelial dry weight decreased gradually. At pH 5.5, the onset of sporulation was done within one day at 20 mM it took, at 80 mM three days and at 160 mM concentration. in two days, at 40 mM one to four days were taken, 80 mM concentration respectively. At pH 6.5, the onset of sporulation was done in three days and four days at 80 mM concentrations respectively. Spore formation was not shown at pH 7.0. In controlled medium with all levels of pH, spore formation was not shown.

• Biomolecules & Therapeutics
• /
• v.11 no.2
• /
• pp.119-125
• /
• 2003

The present study was conducted to investigate the effects of bornyl acetate on arterial blood pressure and vascular contractile responses in the normotensive rats and to establish the mechanism of action. Both phenylephrine (an adrenergi$\alpha$-receptor agonist) and high potassium (a membrane-depolarizing agent) caused greatly contractile responses in the isolated aortic strips. These phenylephrine (10$^{-5}$ M)-induced contractile responses were depressed in the presence of high concentrations of bornyl acetate (10∼20 $\mu\textrm{g}$/ml), but not affected in low concentrations of bornyl acetate (2.5∼5$\mu\textrm{g}$/ml). High potassium (5.6 ${\times}$ 10$^{-2}$ M)-induced contractile responses were also greatly inhibited in the presence of bornyl acetate (2.5∼20 $\mu\textrm{g}$/ml) in a dose-dependent fashion. Bornyl acetate (1∼10 mg/kg) given into a femoral vein of the normotensive rat produced a dose-dependent depressor response, which is transient (data not shown). Interestingly, the infusion of a moderate dose of bornyl acetate (3mg/kg/30 min) made a significant reduction in pressor responses induced by intravenous norepinephrine. Collectively, these results obtained from the present study demonstrate that intravenous bornyl acetate causes a dose-dependent depressor action in the anesthetized rat at least partly through the blockade of adrenergic $\alpha$$_1$-receptors. bornyl acetate also causes vascular relaxation in the isolated aortic strips of the rat via the blockade of adrenergic $\alpha$$_1$-receptors, in addition to the unknown mechanism of direct vasorelaxation.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.105-111
• /
• 2005

An experimental study is performed for extinguishing of n-heptane pool fire by water mist containing potassium acetate as a fire suppression additive. Water mist was generated by a single pressure nozzle in a small-scale chamber. The drop size distribution of water mist was measured using laser diffraction(Malvern particle sizer). The flame temperature, oxygen concentration and carbon monoxide concentration were measured. In case of using additives, the fire extinguishing time was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.216-221
• /
• 2010

Polyvinyl acetate (PVAc) prepared by emulsion polymerization has broad applications for additive such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly (vinyl acetate-eo-ethyl acrylate) (VAc-EA) was synthesized using potassium persulfate as catalyst and polyvinylalcohol (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced adhesion, water resistance during VAc-EA emulsion polymerization. No coagulation and complete conversion occur with the reactant mixture of 10 mmol/L potassium persulfate, 10 mmol/L poly ( vinyl alcohol) (PVA 17). As the concentrations of PVA increase, the viscosity becomes increase.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.384-388
• /
• 2019

In winter season, the snow and ice accretion on the bottom of the high speed railway rolling stock and boogie part has fallen at a high speed from the ballast section (gravel section for the transmission of the rolling stock load received by sleepers and fixing sleepers), causing the gravel to be scattered, thereby damaging the railway rolling stock structures and facilities. In order to solve these problems, the gravel scattering prevention net, manual de-icing, and movable hot air machine were used, but their efficiency was low. For the more efficient de-icing than ever before, an optimum material for de-icing fluid for high speed railway rolling stock was developed by evaluating the ice melting capacity, kinematic viscosity, evaporation of the material used as a chemical de-icing fluid. Four kinds of organic acid salts (sodium formate, sodium acetate, potassium formate and potassium acetate) and two different alcohols (propylene glycol, glycerol) were used as evaluation materials. Potassium formate, potassium acetate, and propylene glycol had similar ice melting capacities in the indoor test, but the propylene glycol showed the best ice melting capacity in spraying the system simulation test. This is because the kinematic viscosity of propylene glycol was 2.989029 St, which is higher than those of other materials therefore, it could stay longer on the ice and de-icing. In addition, potassium formate and potassium acetate were difficult to be used since the crystals precipitated and adversely affected the appearance of the rolling stock. The propylene glycol is the most optimum as an de-icing fluid for the high speed railway rolling stock.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2004.11a
• /
• pp.19-24
• /
• 2004

• Korean Journal of Environmental Biology
• /
• v.18 no.2
• /
• pp.255-262
• /
• 2000

This study was carried out to investigate the physiological changes induced acutely with the low doses of lead acetate in the synaptosomes from the cerebrum and brain stem of the rat. The general uptake patterns of [$^3$H]-serotonin were observed in synaptosomes, as a model of presynaptic nerve terminal, from the cerebrum and brain stem. And the effects of the low doses of lead acetate on the uptake process were investigated id vitro and in vivo. The Km value of the uptake of the [$^3$H]-serotonin by the synaptosomes was 0.5 $\mu$M in the cerebrum and 0.1 $\mu$M in the brain stem. These low values reveal that the synaptosomes from the cerebrum and the brain stem have a high affinity to [$^3$H]-serotonin, especially in brain stem. The uptake of $\mu$M-serotonin was dependant on the sodium and potassium ions. When being treated with ouabain, the $Na^+$ $-K^+$ ATPase inhibitor, the uptake of [$^3$H]-serotonin was reduced. This supports strongly that the uptake of [$^3$H]-serotonin was sensitive to the changes of the concentrations of the sodium and potassium ions. When the calcium channel blocker, verapamil, was treated, the uptake of [$^3$H]-serotonin was changed only in synaptosomes from the brain stem. The uptake of [$^3$H]-serotonin was reduced by the lead treatment in the synaptosomes from the cerebrum and brain stem in vitro and in vivo. [lead acetate, synaptosomes, $^3$H-serotonin, rat]