• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1017-1021
• /
• 2000

This paper addresses experimental results carried out to investigate the characteristics of dynamic mass for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on dynamic mass, five different postures and three different vibration excitation levels were considered. The applied acceleration and transmitted force to the hip of the seated subject were measured simultaneously. Detailed experimental results of measured dynamic mass are illustrated for each posture and/or vibration excitation level. Maximum peaks of around 5 Hz were observed for most experimental cases. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride duality.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.3
• /
• pp.193-200
• /
• 2012

A numerical analysis is carried out in order to obtain aerodynamic data of the ski jump. The body modelling of Korean people is used in the numerical simulation and the result is validated by comparing it with the wind tunnel experiment. A flying posture, which provides the maximum lift-to-drag ratio, is found by analyzing the aerodynamic coefficients of various flight conditions. The result of the present study can be applied to fixing the postures of Korean ski players and is expected to advance the national sports science.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.5
• /
• pp.391-402
• /
• 2008

Today's product development environment is characterized as abrupt changes in consumer needs and short lifecycle of the product, which requires manufacturing companies to be equipped with time-to-market and time-to-volume strategies as prime factors for the successful product launch on market. They especially need to bring a product to the market faster with smart methodologies that enable assembly manufacturers to efficiently simulate and manage part assembly information throughout product development process. The research in this paper provides n e-manufacturing methodology considering geometric constraints in order to decide assembly process sequences. The methodology organizies the part layout (position & orientation) in order to optimize human postures during the assembly processes. As the case studies, assembly parts for two commercial products have been generated as CAD models and analyzed for the desired solutions for part assembly sequences using the proposed methodology.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.581-590
• /
• 1991

This study was carried out for the comparison of the head postures between mouth breathers and normal nasal breathers. For this purpose, a test group of 28 mouth breathers, between the ages of 8 to 12 years old and a control group of 25 nasal breathers were used. Following results were obtained after comparing the craniofacial and craniocervical angulations to the True Vertical line. 1. In the comparisions relating to the True Vertical Line, results were obtained using four items; NSL/VER, FH/VER, NL/VER, PMV/VER. Variations were observed in all the items and the craniofacial angulations in the mouth breathers group showed more superior position compared to the control group. 2. In the comparisions relating to the craniocervical angulations, results were obtained using four items; NSL/OPT, FH/OPT, NL/OPT, PMV/OPT. Variations between the two groups were observed only in the PMV/OPT item and the mouth breather group showed more craniocervical angulations compared to the control group.

• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.97-103
• /
• 2011

This study compared the effects of different frequencies of self-monitoring on safe sitting postures. Participants were four office workers. The dependent variable was the safety percentage for four body positions. The independent variable was self-monitoring frequency: high and low self-monitoring frequencies. Results showed that the safety percentage increased when self-monitoring was introduced. However, the effects of the two different self-monitoring frequencies on safe performance were not statistically different.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.943-949
• /
• 2010

When PCB soldering is performed with microscope due to the electronic components' microminiaturization, workers' awkward upper body postures and difficulties being in focus among lens, object and eyes are one of reasons for productivity decline. The object of this study is to investigate the level of difficulties of work and the extent of productivity improvement by changing work interfaces from the work using microscope to the work using LCD monitor. Independent variables was usage of microscope and image system and dependent variables were upper body segments including neck, shoulder, back, and waist, task convenience and eye fatigue. The Visual Analogue Scale (10cm) was used for questionnaire and one way ANOVA (two levels) and two sample t-test were conducted. In addition, RULA rating was conducted for working postures. The result showed that interface changes of LCD monitor, suggested by productivity comparison per one Man Hour, highly contributed to work convenience and productivity improvement.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.113-119
• /
• 1995

Many studies have been done to determine the magnitudes of force a man can exert on the objects. However, very little attention has been paid to those In postures on slopes. This paper was aimed to evalute how human work postures would affect the push/pull force and to grasp the relationships between the rectified EMG(REMG) measured at the trunk muscles and force exerted on upward slopes. Two subjects participated in the experiment. The results showed no lineal relationship between the REMG and exerted force at handle. But as the slope and handle height increased, exerted force and muscular stress on erector spinae or rectus abdominis were generally increased. It was notified that since ANOVA did not detect any statistical significance in REMG variation due to dominant muscles, careful application and interpretation of the REMG should be required in analyzing maximal force exertions.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.90-98
• /
• 2008

This research selects the lifting task to be the main subject. Four experiments were designed to measure which among lifting postures, lifting heights, waist-belt, and breathing control significantly influences intra-abdominal pressure (Gallagher, 1991; Lavender, Andersson and Natarajan, 1999). The experimental results were taken to be the recommendations of the manual materials handling work design. The research findings reveal that the symmetrical stoop posture is the most significant to the intra-abdominal pressure within all lifting postures. When the lifting height is increased, the intra-abdominal pressure produced relatively goes up. Also, the combination of symmetrical stoop posture, waist-belt use, and inspiration and holding at the same time is the most efficient in carrying out lifting tasks. Simultaneously, the research discovers that for any posture, the volume of the intra-abdominal pressure is much bigger when using the waist-belt compared to when it is not used. Therefore, the waist-belt design for the lifting works might be the future research approach.

• International Journal of Safety
• /
• v.10 no.1
• /
• pp.32-35
• /
• 2011

Lifting capacity and difficulty of task are influenced by body posture. In RULA and REBA, the body was divided into segments which formed two groups, A and B. Group A includes the upper and lower arm and wrist while group B includes the neck, trunk and legs. This ensures that whole body posture is recorded so that any awkward or constrained posture of the legs, trunk or neck which might influence the posture of the upper limb. This study aimed to measure MVC (maximum voluntary contraction) and subjective judgment in psychophysical method (Borg's scale) according to trunk and upper arm angle and to analyze results statistically. The results of this study were that lifting capacity was more influenced by interaction of body posture rather than angles of each part, and MVC variation according to trunk and upper arms angles should different patterns. This means that we consider the interaction of trunk angles and upper arm angles when we access risk factors of the postures. This survey would be also the basic data to evaluate difficulty of lifting tasks according to body postures ergonomically.

• Journal of Veterinary Clinics
• /
• v.19 no.1
• /
• pp.23-27
• /
• 2002

This study was performed to compare the individual characteristics of the vocalization and behavior in the adult female German Shepherd in military service. In this study, a stranger and an other strange dog approached their kennel. Their body postures included ears forward and up, slowly wagged tails, lips raised, mouth open and teeth exposed. It was Interesting that their vocalizations were only the bark without any combination of other vocalizations. There were significant differences between duration of call(DC), pitch(P), Fl formant, F2 formant, F3 formant and F4 formant(p<0.05) except interval between call(IBC) and intensity(I) among their barks. It was suggested that the differences between same breed dogs'barks could be recognized and the data of spectrogram, especially formant contour, could be used to discriminate the sender characteristics. The body postures could also be used to understand their mind.