• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.81-85
• /
• 2009

Work related musculoskeletal disorders(WMSDs) was a leading cause of sick leave and injuries in the industries of our country. Posture was an important consideration in the design of work method and workplaces, because it affected the ability of workers to use various equipments and influenced how long they could perform their job without feeling discomfort, fatigue, and musculoskeletal disorders. Imbalanced lower limb postures such as a squatting posture were awkward working postures common to the shipbuilding shops, farms, automobiles assembly lines in our country. Different awkward working postures were known to be associated with specific musculoskeletal disorders. Eight postures in lower limb postures divided into balanced and imbalanced postures were evaluated by electromyographic(EMG) activity for lower limb muscles. Twelve male subjects participated in this study. This paper was to analyze the effects of lower limb muscles workload according to lower limb postures(knee angle) and working time. The ANOVA results showed that most EMG root mean square(RMS) values were statistically significant effect according to lower limb postures(knee angle) and working time. Therefore, the results of this study will provide the basis to evaluate workload of lower limb postures correctly adopted by workers in various jobs and the ergonomic reference to prevent WMSDs.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.88-94
• /
• 2013

The purpose of this study is to find out the difference of foot pressure according to the firefighter's work postures for providing the basic information to prevent Musculoskeletal disorders. This study was conducted by 9 male firefighters. Work postures were selected for rescuee handling, fire hose and hydraulic rescue equipment work postures. These were divided into 3 position, "High", "Middle" and the postures of taking out and letting down hydraulic rescue equipment were analyzed as starting point and end point respectively. Foot Pressure was used to analyze contact area, peak pressure, and maximum force in terms of work postures, and compared between fire hose and hydraulic rescue equipment work postures. The results of foot pressure are as follows. According to the results of rescuee handling work postures, one person handling posture showed wide contact area and foot pressure showed the highest at right foot. Accoridng to the (High), (Middle), (Low) postures of fire hose, the results didn't show the difference among the contact area, peak pressure and maximum force. As the results of hydraulic rescue equipment work postures, (Low) postures showed the highest in terms of the right foot of contact area, peak pressure and maximum force and (High) postures showed the highest in left foot. The increase of foot pressure lead to be inconvenience of low extremity and muscle fatigue for maintaining postural control cause pain. Thus, it is necessary to design insole-equipped working shoe for reduce the impulse and effect of foot during the rescuee handling work which standing out as foot pressure.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.1
• /
• pp.67-74
• /
• 2011

The study was constructed an analysis of postures of a expert diver's wearing and taking off with skinscuba equipment using ergonomics tools(REBA, RULA, OWAS) for prevention of Musculoskeletal injuries. This survey is consisted of 4 postures in terms of wearing and taking off : Crouching(alone), Standing(alone), Helping of assistance, Using of stanchion. Their rate of injuries is getting higher due to instability postures, exposed dangers and excessive physical actions. So this study provides basic and educational information for prevention of that. The result is as follows : The result of crouching postures of wearing alone was REBA 9(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 2, and crouching postures of taking off alone was REBA 12(Ac Level 4), RULA 7(Ac Level 4), OWAS AC 4. The result of standing postures of wearing alone was REBA 8(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 3, and standing postures of taking off alone was REBA 8(Ac Level 3), RULA 7(Ac Level 4), OWAS AC 3. The result of helping of assistance postures of wearing was REBA 4(Ac Level 2), RULA 3(Ac Level 2), OWAS AC 2, and standing postures of taking off alone was REBA 4(Ac Level 2), RULA 4(Ac Level 2), OWAS AC 1. The result of using of stanchion postures of wearing was REBA 3(Ac Level 1), RULA 3(Ac Level 2), OWAS AC 1, and standing postures of taking off alone was REBA 3(Ac Level 1), RULA 3(Ac Level 2), OWAS AC 1. Especially both postures of wearing and taking off alone showed high results in the analysis of postures using ergonomics tools(REBA, RULA, OWAS).

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1019-1030
• /
• 2011

The aim of this study was to develop a pattern of flight attendant uniform shirts to provide better comfort for their work postures. Flight attendants' work postures were evaluated to determine the problems of clothing and mobility during their work. The pattern of the flight attendants' uniform shirt was altered by applying dynamic wearing ease(DWE). DWE was calculated from four standardized dynamic postures and a static posture. An experimental garment was made with the altered postures. The researcher redesigned the pattern of the uniform shirts, which minimizes physical limitations in movements. The fit and mobility of the shirts were evaluated. Results of this study are as follows. First, the five representative work postures were selected by "clothing stress" and "repetitiveness." These postures included raised arms, twisting midriff and shoulder postures. Five representative postures were selected by using the ergonomic posture assessment device index(OWAS). Second, the experimental garment was developed by applying DWE across the back and at armhole depth, back length, and side length. Third, the fit and mobility of the experimental garments and the original uniform shirts were compared at the flight working environment set and 5 dynamic body postures of raising arms. The experimental garments made with an altered pattern provided better fit and mobility than the original sample shirts.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.165-170
• /
• 2012

Objective: The aim of this study is to develop new K-OWAS on the basis of the anthropometry of Koreans considering works in shipbuilding and heavy industry for evaluation whole-body working postures. Background: Work Related Musculoskeletal Disorders(WMSDs) were a leading cause of sick leaves and injuries in the industries of our country. Especially, awkward working postures and handling of heavy weight are known as a main cause of WMSDs. OWAS, RULA and REBA are much used as the method for evaluating the awkward working postures. OWAS is the working postures evaluation method that can be used for the evaluation of whole-body working postures. OWAS was the method made based on the anthropometry of the foreigner, working postures and weight does not fit our work state. Method: This method was evaluated considering the anthropometry of the Koreans, working postures and weight in shipbuilding and heavy industry work state in Korea. Results: Correlation of action level of OWAS and subjective discomfort for each body parts were not statistically significant($p{\geq}0.1$). But correlation of action level of K-OWAS and subjective discomfort for torso and waist were statistically significant($p{\leq}0.1$). Conclusion: K-OWAS was suitable in the evaluation of upper body including torso and waist. Application: New method for whole-body working postures from this study prevent WMSDs and help improvement of working environment and design of working method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2737-2742
• /
• 2003

Kinematic calibration enhances absolute accuracy by compensating for the fabrication tolerances and installation errors. Effectiveness of calibration procedures depends greatly on the measurements performed. While the Cartesian postures are measured completely, all of the geometric parameters can be identified to their true values. With partial pose measurements, however, few geometric parameters may not be identifiable and effectiveness of the calibration results may vary significantly within the workspace. QR decomposition of the identification Jacobian matrix can reveal the non-identifiable parameters. Selecting postures for measurement is also an important issue for efficient calibration procedure. Typically, the condition number of the identification Jacobian is minimized to find optimum postures. This paper investigates identifiable parameters and optimum postures for four different calibration procedures - measuring postures completely with inverse kinematic residuals, measuring postures completely with forward kinematics residuals, measuring only the three position components, and restraining the mobility of the end-effector using a constraint link. The study is performed for a six degree-of-freedom fully parallel HexaSlide type paralle manipulator, HSM. Results verify that all parameters are identifiable with complete posture measurements. For the case of position measurements, one and for the case of constraint link, three parameters were found non-identifiable. Optimal postures showed the same trend of orienting themselves on the boundaries of the search space.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.81-90
• /
• 2017

This paper presents a smart seat for correction of driver posture while driving. We introduce good postures with seat height, seat angle, head height, back of knees, distances of foot pedals, tilt of seat, etc. There have been some studies on correction of good posture while driving, effects of driving environment on driver's posture, sitting strategies based on seating pressure distribution, estimation of driver's standard postures, and others. However, there are a few studies on guide of good postures while driving for problem of driver's posture using machine leaning. Therefore, we suggest a smart seat for correction of driver's posture based on machine leaning, 1) developed the system to get postures by 10 piezoelectric effect element, 2) collect piezoelectric values from 37 drivers and 28 types of cars, 3) suggest 4 types of good postures while driving, 4) analyze test postures by kNN. As the results, we can guide good postures for bad or problems of postures while driving.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.4
• /
• pp.45-56
• /
• 2004

The purpose of this study is to evaluate perceived discomfort of working postures in terms of upper body (back, shoulder, and elbow) flexions when an external load varies. Eighteen subjects participated in an experiment of appraising perceived discomfort of varying upper body postures with three levels of external loads given. The ANOVA results showed that the perceived discomfort of upper body postures was significantly affected by the external load. It was also apparent that the interactions between external load and upper body posture were significant (p< 0.001). The result implies that a new posture classification scheme for workload assessment methods may be in need to reflect such interactions between external load and upper body posture. In order to support the statement, a regression model of perceived discomfort of upper body postures obtained from the experiment was developed and compared to that of perceived discomfort of seven work-related postures found in automobile assembly operations. The correlation coefficient between predicted and actual values of perceived discomfort was about 0.96. It is expected that the result help to properly estimate the body stress resluting from worker's postures and external loads and can be used as a valuable design guideline on preventing work-related musculoskeletal diseases in industry.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1476-1481
• /
• 2003

Kinematic calibration enhances absolute accuracy by compensating for the fabrication tolerances and installation errors. Effectiveness of calibration procedures depends greatly on the measurements performed. This paper investigates identifiable parameters and optimum postures for four different calibration procedures - measuring postures completely with inverse kinematic residuals, measuring postures completely with forward kinematics residuals, measuring only the three position components, and restraining the mobility of the end-effector using a constraint link. The study is performed for a six degree-of-freedom fully parallel HexaSlide type parallel manipulator, HSM. Results verify that all parameters are identifiable with complete posture measurements. For the case of position measurements, one and for the case of constraint link, three parameters were found non-identifiable. Selecting postures for measurement is also an important issue for efficient calibration procedure. Typically, the condition number of the identification Jacobian is minimized to find optimum postures. Optimal postures showed the same trend of orienting themselves on the boundaries of the search space.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.2
• /
• pp.41-52
• /
• 2016

PURPOSE: This study was conducted to compare the levels of usage of the superficial neck muscles during head rotation in forward head posture and in multimodal postures for improvement of cervical rotation movement impairment. METHODS: To acquire electromyography (EMG) signals from the sternocleidomastoid (SCM-M), upper trapezius (UPT-M), and the splenius capitis (SPC-M) muscles, 11 subjects practiced right rotation of the head in forward head postures (FHP), upright sitting postures (USP), upright sitting postures with supported arms (SUP), standing postures with the arms leaning against the wall (WSP), and four feet postures (FFP), respectively. RESULTS: The left SCM-M was used significantly more in the FFP compared to the FHP, but not in other postures (p<0.01). The left UPT-M was used significantly more in all postures other than the FHP. The right SPC-M was used significantly more in the FFP (p<0.001) and significantly less (p<0.05) in the SUP compared to the FHP. CONCLUSION: During the rotation of the head, although the usage of the SPC-M significantly decreased in SUP compared to FHP but the usage of the SCM-M and UPT-M did not decrease significantly in other postures compared to FHP. Further research is necessary to prove the hypothesis that special postures may reduce the activity of the superficial neck muscles during head rotation.