• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.1-8
• /
• 1999

This study was conducted to collect data concerning the preferred driving postures and adopted seat adjustment levels and to grasp relationships among drivers' body sizes, postural angles, and adopted seat positions and angles. Also optimum driving posture and seat adjustment level estimation models were constructed. An experiment was conducted to investigate observed optimum driving posture, and seat adjustment level. Thirty-six subjects (male=20, female=16) was selected to include a wide range of percentiles in the dimensions important for automotive driving workstation design and to be representative of the automotive driving population in Korea. New guidelines and estimation models for optimum postural comfort were developed. There were significant differences between male and female in postural angles but not in seat adjustment levels. Taller subjects preferred a more open and reclined posture. Estimation models enable us to estimate the quantitative optimum driving posture and seat adjustment level with some drivers' physical dimensions.

• The Journal of Korean Physical Therapy
• /
• v.25 no.4
• /
• pp.217-223
• /
• 2013

Purpose: This study was to investigate whether the two different head postures, natural and ideal head posture, affect head/shoulder posture and muscle activity. Methods: Thirty healthy subjects with the forward head and round shoulder posture were participated in this study. This study utilized a within-subjects design with subjects being positioned into two sitting positions: natural head posture (NHP) and ideal head posture (IHP). Forward head angle (FHA) and forward shoulder angle (FSA) of each subject were measured for assessing the head/shoulder posture and muscle activities of upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA) during the forward overhead reaching. Results: There were significant increases in both FHA and FSA after taking IHP, which showed greater angles than in taking NHP. In change of muscle activities, there were significant decreases in both LT and SA after taking IHP, which showed lower activities than in taking a NHP, whereas there was no significant change in UT. Conclusion: These findings demonstrate that postural alterations associated with forward head and rounded shoulder postures could alter scapular kinetics and muscle activity during the forward overhead reaching.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.13-18
• /
• 2019

According to the development of autonomous vehicles worldwide, the driver's posture may not be a normal posture but the various seating positions. Recently, a numbers of research activities has been focused to protect of driver and passengers in various seating positions as well as seating postures. In this paper, the occupant injury severity was evaluated with different seat positions, seatback angles and TTF times.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.173-189
• /
• 2000

The purpose of this study was to evaluate the effect of specific head positions on the mandibular rotational torque movements in maximum mouth opening, protrusion and lateral excursion. Thirty dental students without any sign or symptom of temporomandibular disorders(TMDs) were included as a control group and 90 patients with TMDs were selected and examined by routine diagnostic procedure for TMDs including radiographs and were classified into 3 subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Mandibular rotational torque movements were observed in four head postures: upright head posture(NHP), upward head posture(UHP), downward head posture(DHP), and forward head posture(FHP). For UHP, the head was inclined 30 degrees upward: for DHP, the head was inclined 30 degrees downward: for FHP, the head was positioned 4cm forward. These positions were adjusted with the use of cervical range-of-motion instrumentation(CROM, Performance Attainment Inc., St. Paul, U.S.A.). Mandibular rotational torque movements were monitored with the Rotate program of BioPAK system (Bioresearch Inc., WI, U.S.A.). The rotational torque movements in frontal and horizontal plane during mandibular border movement were recorded with two parameters: frontal rotational torque angle and horizontal rotational torque angle. The data obtained was analyzed by the SAS/Stat program. The obtained results were as follows : 1. The control group showed significantly larger mandibular rotational angles in UHP than those in DHP and FHP during maximum mouth opening in both frontal and horizontal planes. Disc displacement with reduction group showed significantly larger mandibular rotational angles in DHP and FHP than those in NHP during lateral excursion to the affected and non-affected sides in both frontal and horizontal planes(p<0.05). 2. Disc displacement without reduction group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening as well as lateral excursion to the affected and non-affected sides in both frontal and horizontal planes. Degenerative joint disease group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening, protrusion and lateral excursion in both frontal and horizontal planes(p<0.05). 3. In NHP, mandibular rotational angle of the control group was significantly larger than that of any other patient subgroups. Mandibular rotational angle of disc displacement with reduction group was significantly larger than that of disc displacement without reduction group during maximum mouth opening in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group or degenerative joint disease group during maximum mouth opening in the horizontal plane(p<0.05). 4. In NHP, mandibular rotational angles of disc displacement without reduction group were significantly larger than those of the control group or disc displacement with reduction group during lateral excursion to the affected side in both frontal and horizontal planes. Mandibular rotational angle of disc displacement without reduction group was significantly smaller than that of the control group during lateral excursion to the non-affected side in frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group during lateral excursion to the non-affected side in the horizontal plane(p<0.05). 5. In NHP, mandibular rotational angle of the control group was significantly smaller than that of disc displacement with reduction group or disc displacement without reduction group during protrusion in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of the disc displacement with reduction group or degenerative joint disease group during protrusion in the horizontal plane. Mandibular rotational angle of the control group was significantly smaller than that of disc displacement without reduction group or degenerative joint disease group during protrusion in the horizontal plane(p<0.05). 6. In NHP, disc displacement without reduction group and degenerative joint disease group showed significantly larger mandibular rotational angles during lateral excursion to the affected side than during lateral excursion to the non-affected side in both frontal and horizontal planes(p<0.05). The findings indicate that changes in head posture can influence mandibular rotational torque movements. The more advanced state is a progressive stage of TMDs, the more influenced by FHP are mandibular rotational torque movements of the patients with TMDs.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.106-115
• /
• 2006

The purpose of this study is to provide basic data for continuing study in order to accomplish preventive countermeasures for work-related musculoskeletal disorders(WMSD) and to examine related factors in connection with each other as: the working environment, the equipment used, working method, pain symptoms of dentists. The investigation period for this study was from November 1, 2004 to February 28, 2005, and we analyzed questionnaire survey of 190 dentists who were giving medical treatment in and around the metropolitan area and Daegu City. Also, we visited 20 dental hospitals personally and examined the work posture through check lists, interviews, and field investigations on work posture using photos and videotaping. This study showed the increasing physical burdens which were related to dentists work accomplishment and attitude, recognizing pain which were affecting work related WMSD. With the access of ergonomics and improving the education and training of awkward medical treatment methods and posture, and continuous public information about WMSD, the occurrence rate of WMSD could be decreased.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.1
• /
• pp.7-14
• /
• 2018

Purpose : The purpose of this study was to confirm changes in the muscle activity of the quadriceps femoris with changes in the ankle and hip joint angles during the transition from sitting to standing. Method : Twenty-five healthy 20-30-year-old women participated in the study. The subjects performed standing-up movements in four positions: standard posture (hip = $90^{\circ}$/ankle = $0^{\circ}$); posture on a decline board (hip > $90^{\circ}$/ankle < $0^{\circ}$), posture on a footboard (hip > $90^{\circ}$/ankle = $0^{\circ}$); and posture on a decline board with a higher chair (hip = $90^{\circ}$/ankle < $0^{\circ}$). Then, the muscle activities of the rectus femoris, vastus medialis and vastus lateralis were measured using surface electromyography. Result : The muscle activities of the rectus femoris, vastus medialis and vastus lateralis in the footboard application were statistically significantly higher than in the application of the decline board with a higher chair. Conclusion : This study confirms that the flexion of the hip joint has a greater effect than the plantar flexion of the ankle joint on the muscle activity of the quadriceps during a sit-to-stand movement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.117-125
• /
• 2015

In the modern age, it is important for people to maintain a good sitting posture because they spend long hours sitting. Posture correction treatment requires a great deal of time and expenses with continuous observation by a specialist. Therefore, there is a need for a system with which users can judge and correct their postures on their own. In this study, we collected users' postures and judged whether they are normal or abnormal. To obtain a user's posture, we propose a four-joint motion capture system that uses inertial sensors. The system collects the subject's postures, and features are extracted from the collected data to build a database. The data in the DB are classified into normal and abnormal postures after posture learning using the K-means clustering algorithm. An experiment was performed to classify the posture from the joints' rotation angles and positions; the normal posture judgment reached a success rate of 99.79%. This result suggests that the features of the four joints can be used to judge and help correct a user's posture through application to a spinal disease prevention system in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.1-7
• /
• 2006

This study determined the optimal positions of the movable steering wheel and pedal systems of industrial vehicle by various body dimensions. The position of objects and starting driving posture were measured by Martin-type anthropometer and goniometer. The X, Y and Z axis of movable steering wheel and pedal systems were measured horizon distance from right side to left side, horizon distance from front side to rear side and vertical distance from floor to ceiling. During the experiment in order to exclude learning effectiveness with forklift driving, 27 subjects who had male not experiences in driving a forklift used in the experiment. The relationship between the position of steering wheel and driver's posture with body dimensions was analyzed by using correlation relation and paired comparison t-test based on the measured data. The pedal location in X and Z axises was not related with various body dimensions. Also, the steering wheel was different among the angles of the right elbow and shoulder depending on the various body dimensions.

• ETRI Journal
• /
• v.44 no.2
• /
• pp.286-299
• /
• 2022

Human activity recognition in real time is a challenging task. Recently, a plethora of studies has been proposed using deep learning architectures. The implementation of these architectures requires the high computing power of the machine and a massive database. However, handcrafted features-based machine learning models need less computing power and very accurate where features are effectively extracted. In this study, we propose a handcrafted model based on three-dimensional sequential skeleton data. The human body skeleton movement over a frame is computed through joint positions in a frame. The joints of these skeletal frames are projected into two-dimensional space, forming a "movement polygon." These polygons are further transformed into a one-dimensional space by computing amplitudes at different angles from the centroid of polygons. The feature vector is formed by the sampling of these amplitudes at different angles. The performance of the algorithm is evaluated using a support vector machine on four public datasets: MSR Action3D, Berkeley MHAD, TST Fall Detection, and NTU-RGB+D, and the highest accuracies achieved on these datasets are 94.13%, 93.34%, 95.7%, and 86.8%, respectively. These accuracies are compared with similar state-of-the-art and show superior performance.