• 생태와환경
• /
• 제38권2호통권112호
• /
• pp.207-216
• /
• 2005

광조건 (D/L = 16 : 8), 수온 ($20\;{\sim}\;24\;＾{\circ}C$) 및 용존산소 (>8 mg $L^{-1}$)가 일정하게 조절되는 실험실 조건 하에서 한국고유어종인 긴몰개 (Squalidus gracilis majimae)의 산란행동 양상 및 산란을 분석하였다. 산란행동은 크게 산란 전 단계 (pre-spawning), 산란 단계 (spawning) 및 산란 후 단계 (post-spawning)행동으로 대별되었다. 특히, 산란 전 행동은 구애 행동 (courtship) 양상에 따라 11개의 단계로 구분되었다. 산란 행동은 구애, 자극, 산란과 분리의 4단계로 나타났으며, 교미 후 단계에서는 휴식 (resting), 난 보호(egg protection) 및 난 섭식 (egg eating)의 3가지 행동양상을 보였다. 긴몰개의 산란은 소등 후 약 3 ${\sim}$ 5시간 사이에 이루어졌으며, 암컷은 간헐적으로 수류를 일으켜 산소를 공급하였고 난 보호 행동을 보였으나, 부화 완료시까지 포식자로부터 난을 보호하는 행동은 나타나지 않아 부분적으로 난을 돌보는 partial-parental care 종으로 나타났다.

• 대한물리의학회지
• /
• 제16권3호
• /
• pp.89-97
• /
• 2021

PURPOSE: This study examined the effects of coordinative locomotor training on the spine appearance and quality of life of patients with idiopathic scoliosis. METHODS: This study included two patients with idiopathic scoliosis: one with a thoracic and lumbar type scoliosis and the other with thoracic type scoliosis. The study design was a single case study (A-B-A'), with a baseline-intervention/phase-post-intervention. The baseline (A) was designed and measured five times, intervention phase (B) ten times, and post-intervention (A') five times. The coordinative locomotor training program was divided into 10 minutes of warm-up exercise, 30 minutes of the main exercise, and 10 minutes of the finishing exercise, for 50 minutes each time. The primary outcome measurements were measured using the Cobb's angle, Adam's test, and Gait view pro 2.0 to determine the changes in the spine appearance. The secondary outcome measurements were compared before and after using the SRS-22 questionnaire to determine the quality of life of the scoliosis patients. A statistical test analyzed the mean and standard deviation, and the rate of change was presented by a visual analysis method using descriptive statistics and graphs. RESULTS: The findings showed that the spine appearance and quality of life of the two subjects were improved compared to the baseline measurements during the intervention phase, and the improved state was maintained during the post-intervention period. CONCLUSION: These findings indicate that coordinative locomotor training may help improve the spine appearance and quality of life of patients with idiopathic scoliosis.

• Journal of Korean Neurosurgical Society
• /
• 제67권2호
• /
• pp.158-165
• /
• 2024

Objective : Superficial temporal artery (STA)-middle cerebral artery (MCA) anastomosis is conducted for flow augmentation. In this study, we measured the STA cut flow of a Korean population and evaluated the relationship between STA cut flow and long-term patency of the bypass. Methods : A retrospective study was conducted. Intraoperative measurement of STA flow was conducted using a microvascular flow meter on patients who underwent STA-MCA. After cutting the distal end, the STA flow rate was measured with no resistance and recorded. After finishing anastomosis, STA flow was measured and recorded. The cut flow index was calculated by dividing post anastomosis flow by cut flow in intracranial atherosclerotic stenosis patients. Results : The median STA cut flow was 35.0 mL/min and the post anastomosis flow was 24.0 mL/min. The cut flow of STA decreased with aging (p=0.027) and increased with diameter (p=0.004). The cut flow showed no correlation with history of hypertension or diabetes mellitus (p=0.713 and p=0.786), but did correlate a positively with history of hyperlipidemia (p=0.004). There were no statistical differences in cut flow, STA diameter, and post anastomosis flow between the frontal and parietal branches (p=0.081, p=0.853, and p=0.990, respectively). Conclusion : The median STA cut flow of a Korean population was 35 mL/min. Upon reviewing previous articles, it appears that there are differences in the STA cut flow between Western and Asian patients.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.359-366
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at$95^\circ{C}$ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.1-1
• /
• 2001

In this study, wool, silk and cotton fabrics were dyed with natural dyes derived from Ginkgo biloba bark using various mordants, and their dyeabilities were discussed. Additionally the fastness to washing, perspiration, light, rubbing, and drycleaning were investigated. And the effects of bacteria reduction and UV-B protection rate were also checked. The optimum dyeing condition of the colorants extracted from the Ginkgo biloba bark was three repeated dyeing at 95℃ for 1 hr. by using post mordanting. Mordanting improved the fastness to washing, Perspiration and drycleaning, but the fastness to light and rubbing were not increased. The bacteria reduction rate of the wool fabric increased drastically by dyeing with extract of Ginkgo biloba bark and its effect maintained after repeated washing and drycleaning. UV-B protection rate of the natural fibers increased by dyeing with extract of Ginkgo biloba bark and the dyed wool fabric was the best of the three fabrics.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.22-29
• /
• 2006

The purpose of this study was to investigate the dyeability and antibacterial activity on wool fabric dyed with cochineal at variable dyeing conditions. Al, Cr, Fe, Cu and Sn were used as mordants and adsorption was compared with different mordanting methods. The optimum dyeing conditions of wool fabrics were dyeing concentration 2.0%(o.w.s), dyeing temperature $60^{\circ}C$, pH 3 and dyeing time 30 minutes. The pre-mordanting method was preferred for Al and Cr, and the post-mordanting one was preferred for Cu, Sn and Fe to achieve better dyeing. The optimum mordanting conditions of wool fabrics dyed with cochineal were mordanting concentration of 1%(o.w.s), mordanting temperature $60^{\circ}C$, and dyeing time 30 minutes. Wool fabrics dyed with cochineal showed a little antibacterial activity, but it was increased by Cu and Sn mordanting. The light fastness and perspiration fastness of wool fabric treated with cochineal were improved by mordanting.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2003년도 춘계학술발표대회 논문집
• /
• pp.187-191
• /
• 2003

Modern interior design is expanding diversely, with the rapid development of technology and change of era. The basic of interior space that is rapidly changing consists of floor, wall and ceiling, and these are formed by materials, materials for structure or finishing materials. In the modern interior space, materials are utilized to present an atmosphere that meets the trend of the dissolution of post-modernism and the trend of minimalism. Accordingly, in this study, designers who take serious view on the relation of space and material, and the relation focusing on completed works, in modern interior design were investigated. The interrelation of the representation of each material, organic space, minimal space, and the space of Oriental fusion style were investigated through the works of modern interior designers, such as Karim Rashid and Ettore Sottsass.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3068-3078
• /
• 1996

stereolithography is a process used to rapidly produce polymer components directly from a computer representation of the part. There are several considerations to be made for the efficient use of the process. Especially, the necessity of support structures, which prevent the part from warping, sagging, or parachuting and toppling as the elevator moves up and down in the resin, is one concern. After solidification, the support structures must by removed in the end. Bacause this post-treatment process is often performed manually, the more the support structures, the more it increases the finishing operations. Especially for a complicated part, the removal operations may be difficult, take so much time, and even reduce the accuracy of the product. Thus it is important to efficiently generate the efficient support structure for each part geometry. This paper proposes a procedure to automatically generate the supprot structures focused on accuracy, efficiency, convenience, and generation speed.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.46-50
• /
• 2004

In today's highly competitive marketplace, it is of great significance for the manufacturing industry to reduce lead-time and costs fur the product development. Since first emerged in 1986, Rapid Prototyping (RP) technology has helped successfully to reduce time and costs. Recently, RP using functional materials such as metal has been researched. However RP using the molten metal has been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish, post finishing, etc., that originate primarily from the overall deposition of molten metal for each layer. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. Also tensile and bending specimens were made by the developed RP process using projection welding and were verified.

• 한국수산과학회지
• /
• 제28권3호
• /
• pp.247-252
• /
• 1995

멸치의 초기 먹이생물을 조사하기 위하여 1990년 6월 광양만에서 채집된 멸치의 장내용물을 조사하였다. 멸치는 난황의 흡수를 끝낸 척색장 3.0mm부터 먹이를 먹기 시작하였다. 멸치 자어의 먹이는 요각류의 난과 nauplius 유생, 유종류 등으로 구성되어 있었다. 척색장 3.0-3.8mm의 자어에서는 요각류 난과 요각류 nauplius 유생이 주요 먹이생물이었으나, 척색장 3.8mm 이상에서는 요각류 nauplius 유생만이 관찰되었다.