• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.49-56
• /
• 2007

습식 개질전처리를 통해 무전해 도금 니켈/폴리이미드 박막을 형성하였으며, 이때 도금 후처리 공정인 후속 열처리 조건에 따른 무전해 니켈 도금 박막과 폴리이미드 사이의 필 강도를 $180^{\circ}C$인 경우 필 강도는 $38.6{\pm}1.1g/mm$에서 $180^{\circ}C$ 처리 시에 $26.8{\pm}2.2g/mm$로 감소하였다. 습식 개질전처리에 의해 폴리이미드 표면에 형성된 carboxyl 결합과 amide결합은 니켈과 폴리이미드 사이의 계면 접착기구와 밀접한 연관성이 있는 것으로 판단된다. 후속 열처리 온도에 상관없이 파괴경로는 모두 폴리이미드 내부였으며, 이때 후속 열처리 온도에 따른 무전해 니켈 도금 박막과 폴리이미드 사이의 박리 강도 거동은 파면 부근에 형성된 carbonyl oxygen결합의 감소와 밀접한 연관성이 있는 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.29-36
• /
• 2014

Recently, in order to enhance the function and usefulness of products, cladding of dissimilar materials that maximizes the performance of the material is being widely used in all areas of industry as an important process. Clad steel plate, produced by cladding stainless steel plate, an anticorrosive material, on carbon steel plate, is being used to produce pressure vessels. Stainless steel plate has good corrosion resistance, and carbon steel plate has good rigidity and strength; clad steel can satisfy all of these qualities at once. This study aims to find the ${\delta}$-ferrite behavior, mechanical properties, structure change, integrity and reliability of clad steel weld on hot rolled steel plates. For this purpose, multi-layer welding, repair welding and post weld heat treatment were implemented according to welding procedure specifications (WPS). In order to observe the mechanical properties and toughness of clad steel weld zone, post weld heat treatment was carried out according to ASME Sec. VIII Div.1 UW-40 procedure for post weld heat treatment. With heat treatment at $625^{\circ}C$, the hold time was used as the process variable, increased by intervals that were doubled each time, from 80 to 1,280 min. The structure of weld part was typical cast structure; localized primary austenite areas appeared near central vermicular ferrite and fusion line. The heat affected zone showed rough austenite structure created by the weld heat input. Due to annealing effects of heat treatment, the mechanical properties (tensile strength, hardness, impact value) of the heat affected area tended to decrease. From the results of this study, it is possible to conclude the integrity of clad steel welds is not affected much in field welding, repair welding, multi-layer welding, post weld heat treatment, etc.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.303-309
• /
• 2014

Objectives: Hydrogen peroxide ($H_2O_2$) surface treatment of fiber posts has been reported to increase bond strength of fiber posts to resin cements. However, residual oxygen radicals might jeopardize the bonding procedure. This study examined the effect of three antioxidant agents on the bond strength of fiber posts to conventional and self-adhesive resin cements. Materials and Methods: Post spaces were prepared in forty human maxillary second premolars. Posts were divided into five groups of 8 each: G1 (control), no pre-treatment; G2, 10% $H_2O_2$ pre-treatment; G3, G4 and G5. After $H_2O_2$ application, Hesperidin (HES), Sodium Ascorbate (SA) or Rosmarinic acid (RA) was applied on each group respectively. In each group four posts were cemented with Duo-Link conventional resin cement and the others with self-adhesive BisCem cement. Push-out test was performed and data were analyzed using 2-way ANOVA and tukey's post-hoc test (${\alpha}=0.05$). Results: There was a statistically significant interaction between the cement type and post surface treatment on push-out bond strength of fiber posts (p < 0.001, F = 16). Also it was shown that different posts' surface treatments significantly affect the push-out bond strength of fiber posts (p = 0.001). $H_2O_2$ treated posts (G2) and control posts (G1) cemented with Duo-link showed the highest ($15.96{\pm}5.07MPa$) and lowest bond strengths ($6.79{\pm}3.94$) respectively. Conclusions: It was concluded that $H_2O_2$ surface treatment might enhance the bond strength of fiber posts cemented with conventional resin cements. The effect of antioxidants as post's surface treatment agents depends on the characteristics of resin cements used for bonding procedure.

• 대한한방소아과학회지
• /
• 제24권3호
• /
• pp.76-80
• /
• 2010

Objectives: The purpose of the case study is to report the effects of post traumatic stress disorder from sexual violence treated by an oriental medical treatment. Methods: The patient was treated by acupuncture at Baekhoi, Naegwan, Hapkok, Taeyang, Changmun and moxa at Baekhoi, Sin-Guel, Chungwan, Kwanwon. Results: The oriental medical treatment resulted considerable improvements for the patient. Conclusions: This study shows that the oriental medical treatment can be an effective treatment for sexual violence victims. However, the symptoms may recur, so we need to observe and manage the patients continuously.

• 대한의료기공학회지
• /
• 제14권1호
• /
• pp.52-62
• /
• 2014

Objective : The aim of this study is to analyze the effectiveness of Korean Medicine treatment on post-hysterectomy syndrome patients by thermographic change during treatment. Methods : 5 female patients who had a hysterectomy within a year were treated with Korean Medicine concluding acupuncture, herbal medicine, cupping therapy, herbal bath. We evaluated the thermographic differences by checking Digital Infrared Thermal Imaging(D.I.T.I.) at CV17(膻中), CV4(關元), ST3(巨髎), BL15(心兪), and BL23(腎兪). Results : In consequence of Korean Medicine Treatment for 3 weeks, thermographic differences between CV17(膻中) and CV4(關元), ST3(巨髎) and CV4(關元), BL15(心兪), and BL23(腎兪) tended to decrease. Conclusion : After Korean Medicine treatment, thermographic differences between upper body and lower body tended to decrease cause shangrexiahanzheng(上熱下寒證) made by hysterectomy became moderated.

• 대한한방내과학회지
• /
• 제40권2호
• /
• pp.236-245
• /
• 2019

Objectives: The aim of this study is to report the effects of Korean medical treatment with electroacupuncture on post-stroke dysphagia. Methods: Two stroke patients with dysphagia received Korean medical treatment including electroacupuncture for about six months and three months respectively. A Numerical Rating Scale (NRS), Video Fluoroscopic Swallowing Study (VFSS) were used to confirm efficacy of electroacupuncture therapy as outcome measurements. Results: After treatment, swallowing function was improved, and symptoms related to dysphagia were decreased. NRS, VFSS showed improvement in stroke patients with dysphagia. Conclusions: This study shows that Korean medical treatment with electroacupuncture can be useful for dysphagia.

• Journal of Acupuncture Research
• /
• 제27권2호
• /
• pp.89-95
• /
• 2010

Objectives : This study was designed to investigate incidence rate, clinical features and treatment of headache followed after acupotomy. And based on that, we study correlating between post acupotomy headache and post-lumbar puncture headache(PLPH). Methods : From September 1st, 2007 to December 31st, 2007, the 73 inpatients who admitted to Daejeon Oriental hospital and underwent acupotomy on lumbar spine and cervical spine etc. more than once were observed. Then 9 inpatients who occurred headache after acupotomy was analyzed according to incidence rate, gender, age, clinical features. Results : We investigated clinical features of post acupotomy headache and made comparative study of post acupotomy headache and PLPH. The average frequency of post acupotomy headache was about 12.3%. The risk factors are undergoing acupotomy on lumbar spine, young age. Gender does not affect the incidence of post acupotomy headache. Patients complain of headache which worsen when the patients is upright and improve after the patients lie back down in a few minutes. Those clinical features are similar to PLPH. Conclusions : Although two type of headache have significant similarities, there is no enough evidence to support this study. In addition, the cause and treatment of post acupotomy headache are still unclear. Thus, based on the above study, more studies have to be investigated.

• Journal of Acupuncture Research
• /
• 제25권5호
• /
• pp.139-149
• /
• 2008

Objectives : The aim of this study was to compare the effect of needle retention(NR) and electro-acupuncture of low(EA(L)) and high(EA(H)) frequencies at $SP_6$ and Sham point in rats. Methods : Intestinal hypermotility was induced by feeding carbachol and experimental groups divided mainly into 7 groups which were normal, holder, control, acupuncture in normal state of rats, pre-treatment of acupuncture(NR, EA) in hypermotility, post-treatment of acupuncture(NR, EA) in hypermotility. We fed charcoal to them after the treatment and measured the travel rate of charcoal in the gastrointestinal track so that which treatment affected more in intestinal hypermotility. Results : As the following study, each acupuncture ways of EA(L) had significant effect of decreasing travel rate on intestinal hypermotility than EA(H) and NR. The comparison between pre-treatment and post-treatment, pre-treatment had slight more effect than post-treatment but not significantly. There was more affected at $SP_6$ than Sham point on this study. Conclusions : There were 21 groups to find out which treatment was best to slow down the intestinal motility and $SP_6$-EA(L)-C had significant effect compared with control group at the figure than any other groups. That meant $SP_6$ had effect on gastric disorder such as intestinal hypermotility and its' effect had more prevention than cure. Further study was needed to have more precise effect of EA and $SP_6$.

• 한국전문물리치료학회지
• /
• 제5권2호
• /
• pp.23-38
• /
• 1998

The objective of this study was to identify the effects of pelvic tilting exercise on gait patterns of hemiplegic patients. The subjects of this study were 31 hemiplegic in- and out-patients of the Rehabilitation Hospital, Yonsei University Medical Center, from September 24, 1997 through November 5, 1997. Pre- and post-treatment change in gait patterns were measured using a ink foot-print. The data were analyzed by the paired t-test, one-way ANOVA, and independent t-test. The findings were as follows: The difference in gait patterns between pre- and post-treatment was statistically significant, with an increase in gait velocity to 7.98 cm/sec post-treatment; an increase in cadence to 7.29 steps/min; a narrowing of the base of support to 1.33 cm; an increase in step length of 3.92 cm on the less affected side and 3.73 cm on the more affected side; an increase in stride length of 5.82 cm on the less affected side and 5.92 cm on the more affected side(statistically not significant in foot angle). In relation to sex, age, cause of stroke, and laterality of paralysis, the difference in gait patterns between pre- and post-treatment was not statistically significant. Where there was no significant difference of the effects of pelvic exercise regarding the degree of spasticity, the presence of a decrease in proprioception, and the duration of treatment. In conclusion, hemiplegic pelvic tilting exercise was found to have transmitting positive effect in improving gait patterns.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.226-232
• /
• 2005

Contact material is widely used in the field of electrical parts. Ag-CdO material has a good wear resistance and stable contact resistance. In order to establish optimizing heat treatment condition, rolling temperature and oxidation process, we studied the microstructure of Ag-CdO material with various conditions. The experimental procedure were melting using high frequency induction, heat treatment, rolling and internal oxidation. And we experimented on difference process, Post-oxidaion. In this study, we obtained the optimizing heat treatment condition was $700^{\circ}C$ for 15 min. and the optimizing rolling temperature was $730^{\circ}C$. In investigation of the microstructure of oxidized material, coarse oxide and depleted oxidation layer existed. The hardness was average Hv 70. When we used Post-oxidation, oxides were finer than prior process and depleted oxidation layer did not exist. The hardness of Post-oxidation material was average Hv 80. And the optimizing rolling temperature was $800^{\circ}C$.