• The Journal of Korean Physical Therapy
• /
• v.15 no.3
• /
• pp.126-152
• /
• 2003

The purpose of this study was to evaluate the value of passive caudal gliding mobilization of the glenohumeral joint on the range of motion (ROM) of active and passive abduction; to evaluate the value of pain relief through visual analogue scale (VAS); to evaluate the correlation between improvement of shoulder abduction and intra-articular movement measured by fluoroscopy in frozen shoulder patients. The subjects consisted of twenty-one patients with clinically diagnosed frozen shoulder (11 males, 10 females) between 40 and 63 years of age (mean age : 52.7 years). The traction and caudal gliding mobilization based on the convex-concave rule in the resting position and at end range of abduction was peformed for 15 minutes per day and was repeated 10 times during a 2 week period. The ROM of abduction was measured by goniometer and pain was measured by VAS. The intra-articular movement was measured by fluoroscope, Neurostar Plus TOP (Siemens, Germany). ROM measurements of each patient was acquired at pre-treatment, immediate post-treatment and 2 week post-treatment. Statistical analysis was performed using SPSS 10.0 for Windows software and data was analyzed using the paired-test and the pearson correlation. The results of this study are as follows: 1. There was a significant decrease of VAS between pre-treatment data and 2 week post-treatment data (P<.05) but no significant difference between pre-treatment and immediate post-treatment data (P>.05). 2. There was a significant increase in ROM of active and passive abduction in the pre-treatment data, immediate post-treatment data, and in 2 week post-treatment data (P<.05). 3. With regard to results of the joint play test, there was a significant difference in the grade of traction between pre-treatment data and immediate post-treatment data and between pre-treatment data and 2 week post-treatment data (P<.05). There was no significant difference between immediate post-treatment data and 2 week post-treatment data (P>.05). 4. With regard to results of the joint play test, there was a significant difference in the grade of caudal gliding between pre-treatment data and immediate post-treatment data and between pre-treatment data and 2 week post-treatment data (P<.05). There was no significant difference between immediate post-treatment data and 2 week post-treatment data (P>.05), 5. With regard to the results of fluoroscopic findings, there was a significant change of the glenohumeral joint space between pre-treatment data and immediate post-treatment data and between immediate post-treatment data and 2 week post-treatment data (P<.05). There was no significant change of the glenohumeral joint space between immediate post-treatment data and 2 week post-treatment data (P>.05). 6. With regard to the results of fluoroscopic findings, there was a significant change of acromiohumeral joint space between the three data (pre-treatment data, immediate post-treatment data, 2 week post-treatment data) (P<.05). 7. Mobility grade by joint play test was significantly increased and was correlated to improved ROM of active and passive abduction (P<.05). In this study of frozen shoulder, passive caudal gliding techniques of the glenohumeral joint results in statistically significant changes in active and passive abduction as well as in VAS. There is also a significant correlation between joint play test and ROM of abduction.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.93-98
• /
• 2001

Wastewaters produced in textile industrial processes contain dyes which are not easily amenable to biological treatment. The object of this study is to determine the post-treatment system of biological process for the textile wastewater by comparing three different types of chemical process, which were 1) post-treatment by ozone or UV, 2) post-treatment by coagulation,3) post-treatment by ozone or UV followed by coagulation. In an application ozone or UV as a post-treatment, color was generally decreased with time, however, SCOD removal effect was not that good. When coagulation was used as point-treatment process, the effluent quality was satisfying. Therefore, the application of coagulation process as a post-treatment of biological process would be more desirable than that as a ozone or UV.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.537-557
• /
• 2005

The purpose of this study was to investigate the effect of pelvic traction and muscle energy technique(MET) for hemiplegic patients on static standing balance. The scale for static standing balance is measured by using mean balance(%), frequence(Hz), sway area($mm^2$), sway path(mm), max sway velocity(mm/s), ant/post sway angle($^{\circ}$), lateral sway angle($^{\circ}$), sway number, change of pelvic height is measured in relation to the height of ASIS and PSIS. The subjects of this study were thirty hemiplegic patients: 15men and 15 women, with an average ages of 50.80 years. The thirty subjects were divided into 3 group of 10 at random ; ten subjects had pelvic traction after bobath therapy (the pelvic traction group), ten subjects had muscle energy technique after bobath therapy (the MET group), and ten subjects had only bobath therapy (the control group). Static standing balance was measured using BPM (balance performance monitor; data print software version 5.3), pelvic height was measured using height measuring with an adjustable horizontal arm. In order to assure the statistical significant of the result, an one-way ANOVA, the paired t-test, and a person's correlation were applied at the.05 level of significance. The results of this study were as follows: 1) The change in pelvic height were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 2) The change in affected and non-affected on weight bearing were not statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p>.05). 3) The change in frequency were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 4) The change in sway area were statistically significant between the MET group, the control group and the pelvic traction group on pre-treatment and post-treatment(p<.05). 5) The change in sway pa1h were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 6) The change in max sway velocity were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 7) The change in ant/post sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 8) The change in lateral sway angle were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). 9) The change in sway number were statistically significant between the pelvic traction group, the MET group and the control group on pre-treatment and post-treatment(p<.05). In conclusion, there was a difference between the experimental group and the control group. In the future, we have to study continuously about pelvic traction and muscle energy technique in hemiplegic patients.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.106-111
• /
• 2014

This article describes effect of post heat treatment on wear characteristics of thermally sprayed Co-based self-flux alloy coating. Co-based self-flux alloy coatings were deposited on steel substrates using a flame spray process. Post heat treatments were carried out at 800, 900, 1000 and $1100^{\circ}C$ for 30min in a vacuum chamber. For analysis of effect of post heat treatment on mechanical properties, wear test and hardness test were performed for post heat-treated coating specimen. Microstructures of heat treated coating layer and wear track were examined using SEM and EDS. Wear loss and hardness became lower with increasing post heat treatment temperature.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.97-106
• /
• 1999

The purpose of this study was to examine the effect of transcutaneous electrical nerve stimulation(TENS) in the patients of dysmenorrhea. A total of thirty subjects were assigned randomly to one of the two experimental groups or to a control group : 1) an Experimental group I received high-frequency TENS(100pps with a 100-microsecond pluse width), 2) an Experimental group II received low-frequency TENS(2pps with a 100-microsecond pulse width), 3) a Control group received medication(Acetaminophen 600mg). All subjects completed visual analogue scale(VAS) pre-treatment; after post-treatment; 1, 2, 3, 4, and 6 hours post-treatment; and the next morning. The results of study were as follows; 1. The mean pain scores decreased in thru groups. 2. The experimental group II and the control group exhibited a significant decrease in pain post - treatment. 3. The experimental group I had the pain relief obtained after three hours post - treatment. The experimental group II had the pain relief obtained immediately after the post - treatment Control group had the pain relief obtained immediately after the post - treatment, but increased pain after four hours of post-treatment. Finally. this result suggests that TENS can reduce significantly the pain of dysmenorrhea. Besides. low-frequency TENS provided a good result to the excellent subjective pain relief in the subject, compared with high-frequency TENS and medication.

• The Journal of Korean Physical Therapy
• /
• v.16 no.1
• /
• pp.157-182
• /
• 2004

The purpose of this study was to evaluate effects of lumbar stabilizing exercise on the functional recovery and the range of motion of low back pain patients. The subjects were consisted of sixty patients who had non specific chronic low back pain(32 females. 28 males; mean aged 37.3) from 19 to 65 years of age(mean age : 37.3). All subjects randomly assigned to the lumbar stabilizing exercise group, the modalities treatment group, the manual treatment group. Lumbar stabilizing exercise group received manual treatment with lumbar stabilizing exercise for 30minutes, modalities treatment group received hot pack used thermal therapy for 20minutes and ICT used electrical therapy for 20minutes and US or MWD used deep thermal therapy for 15minutes, manual treatment group received modalities treatment with therapeutic massage for 10minutes and joint mobilization or manipulation for 10minutes per day and three times a week during 4 weeks period. The Multilevel Roland-Morris Disability Questionnaire(MR-MDQ) was used to measure functional disability level. Visual Analogue Scale(VAS) was used to measure subjective pain level. Remodified Schober test(RST) was used to measure forward flexion range of motion of lumbar segment. Finger-to-Floor test(F-T-FT) was used to measure forward flexion range of motion of full spine of low back pain patients. All measurements of each patients were measured at pre-treatment and 4 week post-treatment. The results of this study were summarized as follows : 1. The MR-MDQ of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 2. The VAS of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 3. The RST of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 4. The F-T-FT of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 5. The results of analyzed effects of MR-MDQ, RST, F-T-FT were significantly reduced (p<.05), but VAS wasn't significantly reduced(p>.05) between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment. 6. The results of LSD post-hoc to find difference between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment that MR-MDQ was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and VAS wasn't significantly reduced all treatment group(p>.05), and RST was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and F-T-FT was significantly reduced stabilizing exercise group than modalities treatment group and manual treatment group (p<.05).

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.1-10
• /
• 2008

Public interest in healthy hairs gets growing as damaged hairs are seen more frequently with the generalization of heat permanent waves. For this study, experiments have been conducted to understand the influences on the changes in physical and morphological features of wave forms and damaged hairs, by collecting virgin hairs from the women in their mid-20's, who had not experienced chemical applications, and by dividing the applications of heat perm hair treatments, PPT(for pre-treatment) and LPP(for post-treatment), into the pre-treatment, the post-treatment, the pre & post-treatment, and the non-treatment. For the wave formations, curl waves were investigated by the bare eyes using the pictures taken by a digital camera. For the comparison of physical features, the experiments of tensile strength and elongation were done and their mean values were found. For the observations of morphological features, the pictures were taken by SEM for comparison. As for the findings, regarding the curl wave shapes of hairs, the most even and elastic S curl was formed in the case of non-treatment. In the physical features, both of the tensile strength and elongation showed a decreasing tendency in line with the hair damage levels, and the case of the pre & post-treatment indicated the tendency most similar to the control group. In the morphological features of the cuticle, observed with an SEM, the pre-treatment showed the higher possibility of reducing the cuticle damages than the post-treatment did. LPP was found to play the role of protective membrane for the post-treatment, and the pre & post-treatment turned out to reduce most effectively the cuticle damages.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.240-242
• /
• 2004

Effect of post treatment on the fatigue strength of a box weldment was investigated in order to improve fatigue life of the weldment. The post treatment applied were the smooth grinding of weld bead, weld toe grinding and hammer peening at the weld toe. The fatigue strength of the weldment after post treatment clearly increased, compared with that of the weldment in as-welded condition. After smooth grinding of weld bead, fatigue crack initiated at the root of the weldment, while fatigue crack initiated at the weld toe for the other methods.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.2
• /
• pp.81-88
• /
• 2001

The effects of post-oxidation and sulfnitriding treatments on the phase transformation in the nitrided case of tool steels have been studied. Dense and compact $Fe_3O_4$ layer was formed at the outer surface of nitride compound layer by post-oxidation treatment and multi layer of iron sulfide(FeS) was formed in the compound layer by sulfnitriding treatment. The surface hardness decreased because of formation of the soft oxide or sulfide at the nitride surface. Diffusion layer of nitride case was not affected by post-oxidation treatment or sulfnitriding treatment of nitrided alloy tool steels.

• Plant Journal
• /
• v.6 no.4
• /
• pp.56-62
• /
• 2010

This study investigated characteristics of the post-weld heat treatment of SA213-T23, which was developed for water wall of the ultra super critical power boiler. The temperature of post weld heat treatment should be $730^{\circ}C$ or higher to reduce hardness of the deposit metal and heat affected zone. Coincidently, the temperature should remain $760^{\circ}C$ or lower to prevent hardness of the base metal from dropping. Hardness decline of deposit metal was trivial according to time when the holding time of heat treatment at $740^{\circ}C$ of post-weld heat treatment gradually increased from initial 15 minutes.