• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.213-214
• /
• 2012

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.203-206
• /
• 2002

We propose the new algorithm for scene segmentation. The proposed system consists motion estimation module and motion segmentation module. The former estimates 2D-motion value for each pixel position from two images transformed by wavelet. The latter determine scene segments well fitting on dominant affine motion models. What distinguishes proposed algorithm from other methods is that it needs not other post-processing for scene segmentation. We can manipulate both multimedia data and objects in virtual environment using proposed algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.248-251
• /
• 2006

Multi-physics problem is considered for the Pitot tube located in uniform freon gas flow with high Mach number and the 3D numerical results of temperature on Pitot tube is given. The model is created by using structural module of ANSYS, the grids are obtained by ICEM, and the problem is solved and the data post-processing is done by CFX.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.174-181
• /
• 2002

In this paper, we introduce the software of the measuring system for on-line test and evaluation of high speed rail. This software should set and control the hardware of the measuring system, perform the analysis and calculation of measuring data and interface between users and the measuring system. For this purpose, three programs, such as a measuring program, a monitoring program and post-processing program, have developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.116-128
• /
• 2015

The purpose of research is to investigate mediating effect of stress management on influence over post traumatic stress disorder with traumatic case experience. In order to investigate, police officers from 4 police stations in Jeju were selected as subjects, 297 police officers. Data processing analysis of the research was verified by going through Baron & Kenny's regression analysis in 4 phases and Sobel Test was done to verify significance level on mediation effect. Through the research by confirming the manifestation route of post traumatic stress disorder symptom after traumatic case experience, assisted in setting up of appropriate post traumatic stress disorder intervention program and the purpose of research is to ultimately help police officers to break free from post traumatic stress and establish positive and dynamic work environment.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.170-176
• /
• 2002

To exchange CAD data between heterogeneous CAD systems, we generally use a neutral format especially STEP, which is the international standard (ISO-10303) for product model data exchange. AP214 (Application Protocol) for the automotive industry not only takes into account geometry and organizational data, but also provides a classification mechanism for product modeling. When reading a STEP file during a design process that is exported from other CAD systems, it is a burden to a designer to go through the tedious process of removing duplicate or non-manifold entities, adjusting parts, and rearranging text. We analyze the structure of AP214 and develop a healing tool to solve the following problem. Without the assembly information in the Master workspace of CATIA, or to read a STEP file from Pro/Engineer, a designer should do a repetitive process of disintegrating an assembly into parts one by one. We have developed a post-processing tool for STEP AP214 that separates out a part from an assembly model and adjusts superfluous or useless entities using the ACIS kernel.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.24-35
• /
• 2021

PURPOSE. This study was to evaluate the effect of rinsing time on the accuracy of interim crowns fabricated by digital light processing. MATERIALS AND METHODS. The maxillary right first molar master die was duplicated using a silicone material, while a study die was produced using epoxy resin. Scans of the epoxy resin die were used in combination with CAD software to design a maxillary right first molar interim crown. Based on this design, 24 interim crowns were fabricated with digital light processing. This study examined the trueness and precision of products that were processed with one of the three different postprocessing rinsing times (1 min, 5 min, and 10 min). Trueness was measured by superimposing reference data with scanned data from external, intaglio, and marginal surfaces. Precision was measured by superimposing the scan data within the group. The trueness and precision data were analyzed using Kruskal-Wallis, nonparametric, and post-hoc tests, and were compared using a Mann-Whitney U test with Bonferroni correction (α=.05). RESULTS. The trueness of the external and intaglio surfaces of crowns varied significantly among the different rinsing times (P=.004, P=.003), but there was no statistically significant difference in terms of trueness measurements of the marginal surfaces (P=.605). In terms of precision, statistically significant differences were found among the external, intaglio, and marginal surfaces (P=.001). CONCLUSION. Interim crowns rinsed for 10 minutes showed high accuracy.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.160-166
• /
• 2012

This paper presents a Reynolds equation solver for hydrostatic gas bearings, implemented to run on graphics processing units (GPUs). The original analysis code for the central processing unit (CPU) was modified for the GPU by using the compute unified device architecture (CUDA). The red-black Gauss-Seidel (RBGS) algorithm was employed instead of the original Gauss-Seidel algorithm for the iterative pressure solver, because the latter has data dependency between neighboring nodes. The implemented GPU program was tested on the nVidia GTX580 system and compared to the original CPU program on the AMD Llano system. In the iterative pressure calculation, the implemented GPU program showed 20-100 times faster performance than the original CPU codes. Comparison of the wall-clock times including all of pre/post processing codes showed that the GPU codes still delivered 4-12 times faster performance than the CPU code for our target problem.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.225-232
• /
• 2010

In this study, an automated ultrasonic testing system and post signal and image processing techniques are developed in order to construct ultrasonic flaw images in weldments. Image processing algorithms are built into the flaw image processing system for the automated ultrasonic testing system. The developed signal and image analysis algorithms addressed in this study include an A-Scan data compression algorithm, ultrasonic image amplification algorithm and B-scan flaw image correction algorithm(SAFT). This flaw image processing system for the automated ultrasonic testing system can be applied to various inspection fields.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.302-309
• /
• 2004

The transmission capacity of wireless communication systems may become dramatically high by employ multiple transmit and receive antennas with space-time coding techniques appropriate to multiple transmit antennas. For large number of transmit antennas and at high bandwidth efficiencies, the receiver may become too complex whenever correlation across transmit antennas is introduced. Reducing decoding complexity at receiver by combining array processing and space-time codes (STC) helps a communication system using STC to overcome the big obstacle that prevents it from achieving a desired high transmission rate. Multi-carrier CDMA (MC-CDMA) allows providing good performance in a channel with high inter-symbol interference. Antenna array, STC and MC-CDMA system have a similar characteristic that transmit-receive data streams are divided into sub-streams. Thus, there may be a noticeable reduction of receiver complexity when we combine them together. In this paper, the combination of array processing and STC in MC-CDMA system over slow selective-fading channel is investigated and compared with corresponding existing MC-CDMA system using STC. A refinement of this basic structure leads to a system design principle in which we have to make a trade off between transmission rate, decoding complexity, and length of spreading code to reach a given desired design goal.