• 제목/요약/키워드: post cure

검색결과 112건 처리시간 0.029초

내열성 에폭시 수지의 제작조건과 전기적 절연특성에 관한 연구 (A Study on the Dielectric Properties and Fabrication Conditions of Thermo-Setting Epoxy Resin)

  • 안영주;곽영순;조정수;최세원;이종호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.761-762
    • /
    • 1988
  • This paper is to investigate dielectric properties, dielectric breakdown strength, varing of interior organization and gelling point temperature as parameter of post-cure conditions of thermo-setting epoxy resin.

  • PDF

원발성 종격동 지방육종 -1예 보고 - (Primary Mediastinal Liposarcoma - 1 Case Report -)

  • 이성윤;홍은경;지행옥
    • Journal of Chest Surgery
    • /
    • 제22권6호
    • /
    • pp.1061-1069
    • /
    • 1989
  • A case of liposarcoma was reported in 52 year-old female. She had the operation history due to mediastinal lipoma at other Hospital before 26 months ago. Chest X-ray revealed a huge soft tissue mass- density at the entire right lung field, and left middle and lower lung field at admission. At the lateral film, the mass was located in the anterior and middle mediastinum. Transsternal bilateral thoracotomy was performed, followed by extirpation of liposarcoma, wedge resection of superior vena cava, angioplasty of superior vena cava, and then partial pericardiectomy. The post-operative treatment was 5500 rad irradiation. Post-operative course was uneventful, that was noticed by OPD follow-up for 10 months. Primary liposarcoma of the mediastinum is very rare tumor. This tumor grows to an enormous size, and symptoms are referable to compression of the contiguous intrathoracic structures. The treatment of choice is surgery in all cases. Such an approach serves to establish a tissue diagnosis, to relieve the patients* symptoms, and may results in a cure sometimes. Radiotherapy or/and chemotherapy seems to be ineffective, but should be further studied.

  • PDF

고체 추진제 장시간 물성거동 반응 연구 (A Study of Thermo-rheological Behaviour from Long Term Responses of Solid Composite Propellant)

  • 류태하;김낙현;길태옥;최용규
    • 한국추진공학회지
    • /
    • 제21권1호
    • /
    • pp.8-16
    • /
    • 2017
  • 고체 추진기관이 노즐마개에 의해 외기와의 교환이 완벽히 차단된다면, 구조적 안정성은 제작초기 조건인 내부조성간의 잔류반응(Post Cure, Migration etc.), 그리고 자유공간 내의 산소(또는 산화방지제)와 습기(제습제)와의 반응에 종속된다. 이로부터 발생하는 혼합형 고체추진제의 기계적 특성은 매우 복잡하며, 추진기관은 발사직전까지 일교차/년교차의 끊임없는 열하중을 받게 된다. 본 연구에서는 고체 추진기관의 제조공정인 성형오븐에서 출고 후 저장안정화까지의 거동을 고체추진제의 열유변학적 단순특성을 적용하여 신속하게 산출할 수 있는 방법을 제시하였다. 이를 위해 온도제어 가능한 Endurance Test 장치를 고안 제작하였으며, 추가적으로 점진적 응력과 변형율 증가에 따른 비선형 특성도 검토한다.

Flexural properties of a light-cure and a self-cure denture base materials compared to conventional alternatives

  • Mumcu, Emre;Cilingir, Altug;Gencel, Burc;Sulun, Tonguc
    • The Journal of Advanced Prosthodontics
    • /
    • 제3권3호
    • /
    • pp.136-139
    • /
    • 2011
  • PURPOSE. A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural strengths and flexural moduli of two alternate base materials. MATERIALS AND METHODS. A cold curing resin (Weropress) and a light curing urethane dimethacrylate base material (Eclipse). Along with Eclipse and Weropress, a high impact resin (Lucitone199) and three conventional base materials (QC 20, Meliodent and Paladent 20) were tested. A 3-point bending test was used to determine the flexural strengths and flexural moduli. The mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations for each group were analyzed by means of one-way analysis of variance (ANOVA) (with mean difference significant at the 0.05 level). Post hoc analyses (Scheffe test) were carried out to determine the differences between the groups at a confidence level of 95%. RESULTS. Flexural strength, displacement and force maximum load values of Eclipse were significantly different from other base materials. Displacement values of QC 20 were significantly different from Lucitone 199 and Weropress. CONCLUSION. The flexural properties and simpler processing technique of Eclipse system presents an advantageous alternative to conventional base resins and Weropress offers another simple laboratory technique.

치과용 레진 시멘트의 중합 수축률 특성에 관한 연구 (In vitro study of Polymerization shrinkage-strain kinetics of dental resin cements)

  • 김태훈;양재호;이재봉;한중석;김성훈
    • 대한치과보철학회지
    • /
    • 제48권1호
    • /
    • pp.55-60
    • /
    • 2010
  • 연구 목적: 치과용 레진시멘트의 중합 수축은 수복물이 치아에 정확하게 합착되는 것을 방해하고, 내부 응력의 원인이 되어 치아에 여러 문제점을 일으킬 수 있다. 이러한 임상적인 문제점을 줄이기 위해서 사용하는 치과용 레진시멘트의 중합 수축률에 대해 아는 것이 중요하다. 본 연구에서는 상업적으로 이용되고 있는 몇 가지 레진시멘트의 시간에 따른 중합 수축률을 측정, 서로 비교하고자 하였다. 연구 재료 및 방법: 3종류의 자가 중합형 레진시멘트(Fujicem, Superbond, M bond)와 3종류의 이원 중합형 레진시멘트(Maxcem, Panavia F, Variolink II) 별로 각각 5개의 시편을 이용하였다. 각 재료의 중합 수축률은 Bonded disk method를 이용하여 측정하였다. 안쪽 직경 16 mm, 두께 1 mm 의 동으로 제작된 링을 유리판 ($74\;mm\;{\times}\;25\;mm\;{\times}\;3\;mm$) 위의 중앙에 위치시켜 부착하고, 그 유리판 중앙에 실험 재료를 구 형태로 만들어 올리고, 다른 유리판으로 눌러서 원판 형태 (직경 8 mm, 두께 1 mm)의 시편을 제작하였다. 시편의 중합 수축률은 재료가 중합이 시작된 후 120분동안, $23^{\circ}C$에서 측정하였다. 시간에 따른 수축량에 대한 kinetics curve를얻고, 각 실험 재료의 수축률의 평균값 (%)과 표준편차를 구한 뒤, one-way ANOVA 및 Scheffe post hoc test를 유의수준 0.05 에서 처리하여 그 결과 값을 비교하였다. 결과: 1. 실험에 사용된 Fujicem, Maxcem, M bond, Panavia F, Superbond, Variolink II 은 중합이 시작 된 120 분 후의 중합 수축률이 각각 3.72%, 4.19%, 4.13%, 2.44%, 7.57%, 2.90%의 값을 보였다. 2. Panavia F가 중합 수축률이 가장 작았고, Superbond가 중합 수축률이 가장 컸다 (P<.05). 3. Maxcem 과 M Bond 간에는 유의한 차이가 없었다 (P>.05). 4. 6종류의 레진 시멘트에서 90% 이상의 대부분의 수축은 중합이 개시된 30분 내에 거의 일어났다. 결론: 자가 중합형 레진시멘트의 혼합 후 나타나는 중합 수축이 이원 중합형 레진시멘트보다 천천히 일어나지만, 혼합 120분 뒤의 중합 수축은 이원 중합형 레진 시멘트 보다 유의할 정도로 높았다. 치과용 레진시멘트의 중합 수축은 혼합한 후 30 분내에 대부분 일어난다.

FRC-포스트의 표면처리가 레진시멘트와의 접착력에 미치는 영향 (Effect of surface treatment of FRC-Post on bonding strength to resin cements)

  • 박찬현;박세희;김진우;조경모
    • Restorative Dentistry and Endodontics
    • /
    • 제36권2호
    • /
    • pp.125-131
    • /
    • 2011
  • 연구목적: Silane 처리가 FRC-포스트와 레진 시멘트 간의 결합강도에 미치는 영향을 알아보고자 하였다. 연구 재료 및 방법: FRC-포스트로 LuxaPost (DMG)와 Rely-X Fiber Post (3M ESPE)를 사용하였으며 자가 접착 레진 시멘트인 Rely-X Unicem (3M ESPE)과 전통형 레진시멘트인 Rely-X ARC (3M ESPE)와의 Rely-X Ceramic Primer (3M ESPE)를 이용한 표면처리 유무에 따른 결합강도를 push-out test를 실시하여 측정하고 independent samples t-test 및 one-way ANOVA와 Scheffe 사후검정을 95% 유의수준에서 실시하였다. 결과: 실험 결과 Rely-X Fiber Post를 사용한 실험군에서 silane 처리와 관계없이 Rely-X ARC를 적용하였을 때, 다른 실험군들에 비해 높은 결합 강도가 나타났으며 LuxaPost를 사용한 실험군에서 각각의 레진 시멘트에 대해 silane 처리를 하였을 때 시행하지 않은 실험군에 비해 높은 결합 강도가 나타났다. 결론: 이상의 실험 결과로 볼 때 미리 silane 처리된 LuxaPost를 사용하더라도 silane 처리를 시행하는 것이 좋은 것으로 생각된다.

임시수복 재료와 본딩제의 화학적 호환성이 전단결합강도에 미치는 영향 (Chemical compatibility of interim material and bonding agent on shear bond strength)

  • 이종혁
    • 구강회복응용과학지
    • /
    • 제32권4호
    • /
    • pp.293-300
    • /
    • 2016
  • 목적: 중합방식과 화학적 조성이 다른 본딩제들이 자가중합형 비스아크릴 임시수복 재료의 결합에 미치는 영향을 알아 보고자 하였다. 연구 재료 및 방법: 원반 형태의 비스아크릴 임시수복 재료 시편 40개를 준비한 후 본딩제의 중합특성에 따라 대조군을 포함 4개의 군으로 나누었다. 본딩제 도포 후 직경 4 mm의 원형 구멍을 가진 4 mm 두께의 테플론 몰드를 이용하여 동일한 비스아크릴 임시수복 재료을 첨상하였다. 전단결합강도시험을 시행하였으며 파절면을 현미경으로 관찰하였다. 일원배치 분산분석과 Tukey 사후분석을 사용하여 유의수준 0.05로 검증하였다. 결과: 화학중합형 본딩제를 사용한 군에서 통계적으로 유의한 가장 높은 전단결합강도를 보였으며($27.36{\pm}4.30 MPa$, P < 0.05) 모든 시편에서 비스아크릴 임시수복 재료 내에서 파절이 일어나는 응집성 파절 양상을 보였다(100%). 실험군중 가장 낮은 값은 광중합형 본딩제를 사용한 군에서 기록되었으며($13.29{\pm}2.56 MPa$) 이는 대조군과 거의 유사한 값을 보였다. 동일한 광중합 방식 이지만 화학중합 레진과의 호환성을 높인 본딩제를 사용한 군에서는 광중합형 본딩제를 사용한 군에 비해 통계적으로 유의하게 높은 값을 보였다(P = 0.043). 결론: 본딩제의 종류가 수리된 비스아크릴 임시수복 재료의 전단결합 강도에 영향을 주며, 비스아크릴 임시수복 재료의 수리 시 적절한 본딩제 선택이 중요하다.

Efficacy and Safety of Ultrasound-Guided Radiofrequency Ablation for Primary Hyperparathyroidism: A Prospective Study

  • Hui-hui Chai;Yu Zhao;Zeng Zeng;Rui-zhong Ye;Qiao-hong Hu;Hong-feng He;Jung Hwan Baek;Cheng-zhong Peng
    • Korean Journal of Radiology
    • /
    • 제23권5호
    • /
    • pp.555-565
    • /
    • 2022
  • Objective: To assess the efficacy and safety of ultrasound (US)-guided radiofrequency ablation (RFA) in patients with primary hyperparathyroidism (PHPT). Materials and Methods: This prospective study enrolled 39 participants (14 male, 25 female; mean age, 59.5 ± 15.3 [range, 18-87] years) between September 1, 2018, and January 31, 2021. All participants had parathyroid lesions causing PHPT, proven biochemically and through imaging. The imaging features of the PHPT nodules, including the shape, margin, size, composition, and location, were evaluated before treatment. Serum intact parathyroid hormone, calcium, and phosphorus levels; parathyroid nodule volume; and PHPT-related symptoms were recorded before and after treatment. We calculated the technical success, biochemical cure, and clinical cure rates for these patients. Complications were evaluated during and after the ablation. Results: Complete ablation was achieved in 38 of the 39 nodules in the 39 enrolled participants. All the patients were treated in one session. The technical success rate was 97.4% (38/39). The mean follow-up duration was 13.2 ± 4.6 (range, 6.0-24.9) months. At 6 and 12 months post-RFA, the biochemical cure rates were 82.1% (32/39) and 84.4% (27/32), respectively, and the clinical cure rates were 100% (39/39) and 96.9% (31/32), respectively. Only 2.6% (1/39) of the patients had recurrent PHPT. At 1, 3, 6, and 12 months after technically successful RFA, 44.7% (17/38), 34.3% (12/35), 15.8% (6/38), and 12.5% (4/32) of participants, respectively, had elevated eucalcemic parathyroid hormone levels. Recurrent laryngeal nerve paralysis occurred in 5.1% (2/39) of the patients, who recovered spontaneously within 1-3 months. Conclusion: US-guided RFA was effective and safe for PHPT patients. RFA may be an alternative treatment tool for patients who cannot tolerate or refuse to undergo surgery.

해계 유침 및 전침의 전.후 처치가 실험적으로 항진된 흰쥐의 장운동에 미치는 영향 (The Effect of Acupuncture and Electro-acupuncture of Low and High Frequencies at $ST_{41}$ on Experimentally Induced Intestinal Hypermotility in Rats: Comparison between Pre-treatment and Post-treatment)

  • 최주영;이현
    • Journal of Acupuncture Research
    • /
    • 제27권3호
    • /
    • pp.117-126
    • /
    • 2010
  • Objectives : The purpose of this study was to compare the effect of needle retention(NR) and electro-acupuncture of low(EA(L)) and high(EA(H)) frequencies at Haegye($ST_{41}$) on intestinal hypermotility induced with carbachol in rats Methods : We made over-activated state of intestinal motility with carbachol in rats and caried out needle retention acupuncture, low frequency electro-acupuncture and high frequency electro-acupuncture at Haegye($ST_{41}$) or sham point in rat devided into pre-treatment group and post-treatment group. And we resulted as followings from measuring charcoal travel rate with observation of intestinal motility. Results : 1. None of acupuncture, low frequency electro-acupuncture and high frequency electro-acupuncture at $ST_{41}$ had significant influences on intestinal motility of rat in normal state. 2. Pre-treated with acupuncture, low frequency electro-acupuncture and high frequency electro-acupuncture and post-treated with acupuncture and low frequency electro-acupuncture at $ST_{41}$ didn't significantly influences intestinal motility in rat which over-activated with carbachol. 3. Post-treated with high frequency electro-acupuncture at $ST_{41}$ suppressed intestinal motility in rat which over-activated with carbachol. Conclusions : These results suggest that treatment high frequency electro-acupuncture at ST41 may be effective on gastric disorders such as intestinal hypermotility and its effect had more cure than prevention.