• 한국식품영양과학회지
• /
• 제21권1호
• /
• pp.9-16
• /
• 1992

This study was carried out to evaluate the effect of Acanthopanacis Cortex boiling extract solutions on the fat accumulation in the obese rats induced by the oral high fat administration for six weeks. Total cholesterol, neutral fat and adipose acid of ACR groups were lower than the control group. During the feeding experiment, LDL and VLDL were increased while HDL was decreased in all groups. Insulin and cortisol were higher than the control group, due to the fat accumulation. Based on the above results, it was shown that it is possible to improve fat accumulation induced by high fat dietary through using the oral administration of Acanthopanacis Cortex boiling extract solutions.

• 대한산업공학회지
• /
• 제22권4호
• /
• pp.533-549
• /
• 1996

This paper is concerned with a sequencing problem in mixed model assembly lines, which is important to efficient utilization of the lines. In the problem, we deal with the two objectives of minimizing the risk of stoppage and leveling part usage, and consider sequence-dependent setup time. In this paper, we present a genetic algorithm(GA) suitable for the multi-objective optimization problem. The aim of multi-objective optimization problems is to find all possible non-dominated solutions. The proposed algorithm is compared with existing multi-objective GAs such as vector evaluated GA, Pareto GA, and niched Pareto GA. The results show that our algorithm outperforms the compared algorithms in finding good solutions and diverse non-dominated solutions.

• Journal of Information Processing Systems
• /
• 제15권3호
• /
• pp.457-463
• /
• 2019

The blockchain and crypto currency has become one of the most essential components of a communication network in the recent years. Through communication networking, we browse the internet, make VoIP phone calls, have video conferences and check e-mails via computers. A lot of researches are being conducting to address the blockchain and crypto currency challenges in communication networking and provide corresponding solutions. In this paper, a diverse kind of novel research works in terms of mechanisms, techniques, architectures, and frameworks have been proposed to provide possible solutions against the existing challenges in the communication networking. Such novel research works involve thermal load capacity techniques, intelligent sensing mechanism, secure cloud computing system communication algorithm for wearable healthcare systems, sentiment analysis, optimized resources.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.181-187
• /
• 2013

The construction market condition is getting worse because of global constructions slow down, low profit, market contraction and so on. For these reason, most construction companies depend on public construction projects which possible to protect construction fee, known as progress payment, by laws. Despite this law, problems of progress payment are constantly occurring and it has been main factors that hinder the construction cost's cash-flow in construction project. To solve this problem, many researchers suggested various solutions but most of solutions were focused on specific target as owner, general contractor, and subcontractor. So, most of solutions were insufficient consider about interaction between contractors. Because of these reasons, it was hard to reflected policy. This research aimed to use system dynamics to develop the model for the application and payment based on the regulations and papers. Also, performed a developed model's verification based on progress payment regulation's basic objectives.

• Journal of the Korean Statistical Society
• /
• 제34권3호
• /
• pp.209-218
• /
• 2005

In response surfaces analysis, we often proceed by supposing that, over a limited region of factor space, a polynomial of only first or second degree might adequately approximate the true function. To find the best subset model, all possible quadratic regressions for response surfaces can be very valuable to get optimum solutions under some reasonable experimentations. However, there is a very hard computational burden to get all possible quadratic regressions. In practice, it is sufficient to consider only hierarchical models. In this paper, we propose an algorithm to get all possible hierarchical quadratic regressions for fitting response surfaces.

• Corrosion Science and Technology
• /
• 제4권6호
• /
• pp.217-221
• /
• 2005

In the present investigation, holographic interferometry was utilized for the first time to monitor in situ the thickness of the oxide film of aluminium samples during anodization processes in boric acid solutions. The anodization process (oxidation) of the aluminium samples was carried out by the technique of the electrochemical impedance spectroscopy(EIS), in different concentrations of boric acid (0.5-5.0% $H_3BO_3$) at room temperature. In the mean time, the real-time holographic interferometry was used to measure the thickness of anodized (oxide) film of the aluminium samples in solutions. Consequently, holographic interferometry is found very useful for surface finish industries especially for monitoring the early stage of anodization processes of metals, in which the thickness of the anodized film of the aluminium samples can be determined without any physical contact. In addition, measurements of electrochemical values such as the alternating current (A.C) impedance(Z), the double layer capacitance($C_{dl}$), and the polarization resistance(Rp) of anodized films of aluminium samples in boric acid solutions were made by the electrochemical impedance spectroscopy(EIS). Attempts to measure electrochemical values of Z, Cdl, and Rp were not possible by holographic interferometry in boric acid especially in low concentrations of the acid. This is because of the high rate of evolutions of interferometric fringes during the anodization process of the aluminium samples in boric acid, which made measurements of Z, Cdl, and Rp are difficult.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.115-136
• /
• 2014

In this study, an extended Kantorovich method, employing multi-term displacement functions, is applied to analyze the vibration problem of symmetrically laminated plates with arbitrary boundary conditions. The vibration behaviors of laminated plates are determined based on the variational principle of total energy minimization and the iterative Kantorovich method. The out-of-plane displacement is represented in the form of a series of a sum of products of functions in x and y directions. With a known function in the x or y directions, the formulation for the variation of total potential energy is transformed to a set of governing equations and a set of boundary conditions. The equations and boundary conditions are then numerically solved for the natural frequency and vibration mode shape. The solutions are verified with available solutions from the literature and solutions from the Ritz and finite element analysis. In most cases, the natural frequencies compare very well with the reference solutions. The vibration mode shapes are also very well modeled using the multi-term assumed displacement function in the terms of a power series. With the method used in this study, it is possible to solve the angle-ply plate problem, where the Kantorovich method with single-term displacement function is ineffective.

• 농촌계획
• /
• 제22권2호
• /
• pp.77-87
• /
• 2016

Targeting people returning to farming and also people preparing for returning to farming, this study analyzed differences in awareness of conflict factors and conflict management focusing on the conflicts experiencing in the process of their movement and settlement process in rural area. In the results, people preparing for returning to farming showed higher awareness of conflicts and also higher necessity of conflict management than people already returning to farming. Also, both groups preferred individual conflict management to structural conflict management. Based on the results like above, the implications can be summarized like below. First, it would be necessary to have programs informing possible conflicts in advance in the process of returning to farming and also relieving psychological anxiety by providing prior-learning to people preparing for returning to farming. Second, it would be necessary to have individual conflict management measures to establish mutual trust and to form community spirit through regular social gatherings between original residents and people returning to farming. Since the effect of conflict management can be maximized only when the structural and individual conflict managements are properly harmonized, it would be necessary to have the structural conflict management which is relatively felt difficult.

• 동아시아경상학회지
• /
• 제10권1호
• /
• pp.59-69
• /
• 2022

Purpose - Burnouts cause the workers to quit their jobs because with the heavy workloads that the employees get subjected to, they feel that they have little control over what they have to accomplish in the workplace. The purpose of this research is to provide adequate solutions using brief consultation process, reducing negative psychological factors. Research design, Data, and methodology - The current research conducted the 'Qualitative Content Analysis' (QCA), which is one of the most employed analytical tools; it has been used widely all over the globe in various research applications in library science and information. Primarily, this analysis is often used as a method in the quantitative tool until the recent decade. Result - Based on ultimate systematic literature analysis, excessive workloads can get addressed by finding proper solutions to the issues of depression, anxiety, irritability, and discouragement. The solutions are (1) Combating Excessive Workloads using Effective Employee Selection, (2) Employee Effective training, and (3) Job redesigning. Conclusion - Selecting or recruiting employees that have skills for the given job also makes it possible for the organization to run its employees effectively and with minimal cases of workload as an organization understands the capabilities and capacities of workload an employee can complete.

• 전자통신동향분석
• /
• 제13권4호통권52호
• /
• pp.59-69
• /
• 1998

The terminology of data prefetching is introduced, which includes stride, repeat distance, stall, pending stall, prefetch degree, prefetch distance, and prefetch offset. The effectiveness of hardware data prefetching in reducing cache misses is shown by presenting a square matrix multiplication example. Thereafter the pitfalls of prefetching and possible solutions are discussed.