• 로봇학회논문지
• /
• 제13권1호
• /
• pp.38-44
• /
• 2018

In this paper, we propose Intelligent Driver Assistance System (I-DAS) for driver safety. The proposed system recognizes safety and danger status by analyzing blind spots that the driver cannot see because of a large angle of head movement from the front. Most studies use image pre-processing such as face detection for collecting information about the driver's head movement. This not only increases the computational complexity of the system, but also decreases the accuracy of the recognition because the image processing system dose not use the entire image of the driver's upper body while seated on the driver's seat and when the head moves at a large angle from the front. The proposed system uses a convolutional neural network to replace the face detection system and uses the entire image of the driver's upper body. Therefore, high accuracy can be maintained even when the driver performs head movement at a large angle from the frontal gaze position without image pre-processing. Experimental result shows that the proposed system can accurately recognize the dangerous conditions in the blind zone during operation and performs with 95% accuracy of recognition for five drivers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1248-1250
• /
• 1996

The objective of camera calibration is to obtain the correlation between camera image coordinate and 3-D real world coordinate. Most calibration methods are based on the camera model which consists of physical parameters of the camera like position, orientation, focal length, etc and in this case camera calibration means the process of computing those parameters. In this research, we suggest a new approach which must be very efficient because the artificial neural network(ANN) model implicitly contains all the physical parameters, some of which are very difficult to be estimated by the existing calibration methods. Implicit camera calibration which means the process of calibrating a camera without explicitly computing its physical parameters can be used for both 3-D measurement and generation of image coordinates. As training each calibration points having different height, we can find the perspective projection point. The point can be used for reconstruction 3-D real world coordinate having arbitrary height and image coordinate of arbitrary 3-D real world coordinate. Experimental comparison of our method with well-known Tsai's 2 stage method is made to verify the effectiveness of the proposed method.

• 한국측량학회지
• /
• 제17권3호
• /
• pp.293-300
• /
• 1999

IRS-1C PAN의 수치화상데이터를 사용하여 수치표고모델을 생성하는 기법을 연구하였다. 번들조정기법을 적용하여 라인별 외부표정요소를 결정하였으며, 그 결과 위성의 자세와 위치 모두에 있어서 1차다항식이 가장 유효하였다. 수치표고모델과 정사투영화상을 생성한 후, 연구 대상영역내의 상이한 표고를 가지고 있는 16점의 평가점을 선정하여, 연구결과의 지도좌표와 비교해본 결과, 표고오차의 RMSE가 $\pm{16.66m}$인 수치표고 모델을 생성할 수 있었다.

• International Journal of Computer Science & Network Security
• /
• 제21권3호
• /
• pp.71-75
• /
• 2021

The article discusses the dead reckoning of the traveled path based on the analysis of the video data stream coming from the optoelectronic surveillance devices; the use of relief data makes it possible to partially compensate for the shortcomings of the first method. Using the overlap of the photo-video data stream, the terrain is restored. Comparison with a digital terrain model allows the location of the aircraft to be determined; the use of digital images of the terrain also allows you to determine the coordinates of the location and orientation by comparing the current view information. This method provides high accuracy in determining the absolute coordinates even in the absence of relief. It also allows you to find the absolute position of the camera, even when its approximate coordinates are not known at all.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.414-430
• /
• 1996

In this paper, a new kinematic structure of a parallel manipulator with six Cartesian degrees of freedom is proposed. It consists of a platform which is connected to a fixed base by means of 3-PPSP(parameters P, S denote the prismatic, spherical joints) subchains. Each subchain has a link which is concected to a passive prismatic joint at the one end and a passive spherical joint at the other. The spherical joint is then attached to perpendicularly arranged prismatic actuators which are fixed at the base. The spherical joint is then attached to perpendicularly arranged prismatic actuators which are fixed at the base. This arrangement provides a basis to control all six Cartesian degrees of motion of the platform in space. Due to its efficient architecture, the colsed-form solutions of the inverse and forward kinematics can be obtained. As a consequence, this new kinematic structure can be servo controlled using simple inverse kinematics becaese forward kinematics allows for measuring the platform's position and orientation in Cartesian space. Furthermore, the proposed structure provides an effective functional workspace. Series of simulations are performed to verify the results of the kinematics analyses.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1002-1012
• /
• 2003

본 논문에서는 여유 자유도를 이용한 두 팔 로봇 매니퓰레이터의 충돌 회피 알고리즘을 제안한다. 여유 자유도를 갖는 각 로봇 팔의 엔드-이펙터는 서로의 충돌을 회피하면서 주어진 작업을 수행하기 위하여 각각 미리 정의된 직선 경로를 따라 이동해야 한다. 이 문제를 풀기 위해서 엔드-이펙터의 위치와 방향을 변화시키지 않는 각 축의 동작인 자체동작을 이용한다. 매 샘플링 시간마다 각 팔의 링크들이 서로 멀어지는 방향으로 자체 동작을 수행함으로써 엔드-이펙터가 주어진 작업도 성공적으로 수행하고, 동시에 서로의 충돌도 회피할 수 있다. 제안한 알고리즘의 성능을 분석하기 위하여 각각 9자유도의 팔을 갖는 두 팔 로봇 매니퓰레이터에 대한 모의실험을 수행하고 그 결과를 제시한다.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2090-2097
• /
• 1992

본 연구에서는 밸브판의 거동을 2차의 회전계로 간주하고, 양력 및 항력(drag force)을 구하는데 있어 Reif등이 구한것과 동일한 방법을 이용하되 정지핀에 의해 그 최대 열림각이 제한을 받는 물리적 사실을 고려하고, 밸브를 통과하는 유량도 단위 입 력이 아닌 정현파(sine wave)로 간주하여 밸브판의 동적거동을 해석하였다. 해석대 상의 밸브 모델로는 Bjork-Shiley 27mm 1엽 밸브를 선정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.433-436
• /
• 2003

The estimation of the position and the orientation for the mobile robot constitutes an important problem in mobile robot navigation. Although the odometry can be used to describe the motions of the mobile robots, there inherently exist the gaps between the real robots and the mathematical model, which may be caused by a number of error sources contaminating the encoder outputs. Hence, applying the standard extended Kalman filter for the nominal model is not supposed to give the satisfactory performance. As a solution to this problem, a new robust extended Kalman filter is proposed based on the Krein space approach. We consider the uncertain discrete time nonlinear model of the mobile robot that contains the uncertainties represented as sum quadratic constraints. The proposed robust filter has the merit of being constructed by the same recursive structure as the standard extended Kalman filter and can, therefore, be easily designed to effectively account for the uncertainties. The simulations will be given to verify the robustness against the parameter variation as veil as the reliable performance of the proposed robust filter.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2008년도 제16차 학술대회
• /
• pp.84-84
• /
• 2008

최근 견관절 질환의 상당수가 관절경 수술로 이루어지고 있다. 좌체위(beath chair position)를 이용한 관절경 수술은 시술 중 관헐적 방법으로의 전환이 용이하고 공간에 대한 orientation을 쉽게 잡을 수 있어 선호되고 있다. 또한 관절경 수술 시 시야 확보를 위해 epinephrine을 혼합한 세척액이 통상적으로 사용되고 있다. 관절경 수술 시 심부 정맥 혈전증(deep vein thrombosis), 가스 색전증, 세척액에 사용하는 epinephrine에 의한 심실성 빈맥 등과 같은 치명적인 부작용이 가끔 보고되어 있다. 관절경하 견관절 수술 도중 심실 빈맥의 발생은 매우 드문 경우이며 이에 대한 보고도 거의 없는 상태이다. 저자들은 2주의 기간 동안 좌체위로 관절경하 견관절 수술을 하는 도중 갑작스럽게 발생한 심실 빈맥 2예를 경험하였기에 원인 및 치료 과정을 보고하고자 한다. 좌체위로 인한 뇌혈류 저하, 가스 색전증 등의 증세는 없었다. 관절경술 도중 세척액에 투입된 소량의 epinephrine이 동시에 체내로 급속히 유입되어 심실 빈맥이 왔으리라 추정하고 있으며, 실험을 통해 이를 증명하고자 하였다.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.188-196
• /
• 2006

During the communication and interaction with a human using motions or gestures, a humanoid robot needs not only to look like a human but also to behave like a human to make sure the meanings of the motions or gestures. Among various human-like behaviors, arm motions of the humanoid robot are essential for the communication with people through motions. In this work, a mathematical representation for characterizing human arm motions is first proposed. The human arm motions are characterized by the elbow elevation angle which is determined using the position and orientation of human hands. That representation is mathematically obtained using an approximation tool, Response Surface Method (RSM). Then a method to generate human-like arm motions in real time using the proposed representation is presented. The proposed method was evaluated to generate human-like arm motions when the humanoid robot was asked to move its arms from a point to another point including the rotation of its hand. The example motion was performed using the KIST humanoid robot, MAHRU.