• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.907-910
• /
• 2007

Recently, a container shipping volume has increased dramatically and continued on a trend of rapid growth, and so the number of container handled at the port increase. therefore, it's increasing about concern of harbor automatism to save distribution costs in harbor. harbor automatism classifies into four large automatism's, gate automatism by using RFID that trailer come with burdening the container to be loaded on ships go though with RFID and Quay-Side container crane automatism that treats cargos loading on ships and automatism of CG that loads containers from yard, and automatism of container transporters that carries containers in between gates. To increase the using efficiency of harbor, detecting exact location of yard crane is very important matter. In this paper, it intends to discuss about yard crane automatism applied UWB Ranging system and bring up the development direction.

• Journal of ILASS-Korea
• /
• v.19 no.3
• /
• pp.115-122
• /
• 2014

As a demand for an automobile increases, air pollution and a problem of the energy resources come to the fore in the world. Consequently, governments of every country established ordinances for green-house gas reduction and improvement of air pollution problem. Especially, as international oil price increases, engine using clean energy are being developed competitively with alternative transportation energy sources development policy as the center. Bio ethanol, one of the renewable energy produced from biomass, gained spotlight for transportation energy sources. Studies are in progress to improve fuel supply methods and combustion methods which are key features, one of the engine technologies. DI(Direct Injection), which can reduce fuel consumption rate by injecting fuel directly into the cylinder, is being studied for Green-house gas reduction and fuel economy enhancement at SI(Spark Ignition). GDI(Galoine Direct Injection) has an advantage to meet the regulations for fuel efficiency and $CO_2$ emissions. However it produces increased number of ultrafine particles, that yet received attention in the existing port-injection system, and NOX. As fuel is injected into the cylinder with high-pressure, a proper injection strategy is required by characteristics of a fuel. Especially, when alcohol type fuel is considered. In this study, we tried to get a base data bio-ethanol mixture in GDI, and combustion for optimization. We set fuel mixture rate and fuel injection pressure as parameters and took a picture with a high speed camera after gasoline-ethanol mixture fuel was injected into a constant volume combustion chamber. We figured out spraying characteristic according to parameters. Also, we determine combustion characteristics by measuring emissions and analyzing combustion.

• Journal of Information Management
• /
• v.37 no.3
• /
• pp.61-84
• /
• 2006

In this paper, we proposed one of the methods for building thesaurus in Science & Technology domain and investigated its applicability as an inference service based on ontology. There exist as many building methods for thesaurus as its role and function, and actually many thesauri capable of ensuring the accuracy and efficiency in information search are being built by many experts. After examining the previous studies related to the principles of building thesaurus and relevant concept "facet", we focused on its characteristics and applied it to building thesaurus. The facet is classified into 2 categories, conceptual facet and relational facet. The latter contains 3 subcategories: category relational facet, attribute relational facet and thematic relational facet. The thesaurus for Science & Technology domain using facets can be applied as a web-based inference service. As a result, the three types of inference service, COP(Communities of Practice), Researcher Tracing and Research Map are provided by means of ontology, and can be applied for the Query Expansion.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.16-25
• /
• 2003

In this paper, the reduction of green house effect gas CO₂ emission and NOx gas emission by using the RORO ship coastal transport of import-export container cargo was investigated. At first, the domestic CO₂ gas emission and the transportation of import-export container cargo were Investigated. Next, the characteristic of a RORO ship and CO₂ emission standard and NOx emission standard were investigated. And also, the reduction of CO₂ emission and NOx emission by the shift of coastal transport from land transport for the transportation of import-export container cargo between Kyongin area and Pusan Port were calculated. Finally, the change of CO2 and NOx gas emission due to the change of the share of coastal transportation and the load efficiency of RORO ship are investigated. The research results show that the shift of RORO ship coastal transport from land transport was very effective to reduce the CO₂ emission but it was no good to reduce the NOx emission.

• Journal of Biosystems Engineering
• /
• v.12 no.1
• /
• pp.45-52
• /
• 1987

In order to improve the thermal efficiency of an internal combustion engine, various ignition timing control systems were examined and the best one was chosen. The parts used for the systems were a microcomputer system with DAS, 8 bit output port (D-FLIP FLOP), three types of isolation circuit, two types of ignition timing pulse generator, three types of switching circuit and two types of high voltage ignition circuit. Most systems did not operate well due to the effects of electromagnetic waves and surge currents occurring when the ignition began or ended with resulting high voltage. The best ignition timing control system was found to be the combination of (microcomputer system)-(ignition timing pulse generator using step motor position control pick-up)-(switching circuit using TR logic)-(high voltage ignition circuit using CDI).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.42-49
• /
• 2014

The gasoline direct injection (GDI) system is considerably spreading in automotive market due to its advantages. Nevertheless, since GDI system emit higher particle matter (PM) due to its combustion characteristics, it is difficult to meet strengthened emission regulation in near future. For this reason, a combined GDI with MPI system, so-called, dual injection (DUI) system is being investigated as a supplemental measure for the GDI system. This paper focused on power and fuel consumption effect by injection mode strategy of DUI system in part load and idle engine operating condition. In this study, port fuel injectors are installed on 2.4 liters GDI production engine in order to realize DUI system. And, at each injection mode, DOE (design of experiment) method is used to optimize engine control parameters such as dual injection ratio, start of injection timing, end of injection timing, CAM position and so on. As a consequence, DUI mode shows slightly better or equivalent fuel efficiency compared to conventional GDI engine on 9 points fuel economy mode as well as MPI mode shows less fuel consumption than GDI mode during idle operation. Furthermore, DUI system shows improvement potential of maximum 2.0% fuel consumption and 1.1% performance compared to GDI system in WOT operating condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.210-219
• /
• 2014

The MPI dual injection engine can enhance the fuel efficiency and engine power. By using one injector per one intake port, MPI dual injection engine has an excellent fuel atomization and targeting injection. As the basic research for the MPI Dual injection engine design, this research was investigated in order to understand the characteristic of the in-cylinder flow and fuel behavior according to engine temperature condition and the fuel type in the MPI dual injection engines. The 3D unsteady CFD simulation for the MPI Dual injection engine was performed using STAR-CD. The engine operating condition was 2,000 rpm/WOT. The parameters for this study were fuel types, fuel temperatures and wall temperatures. As a result, the intake air amount, evaporated fuel in the cylinder and the fuel film on the wall were presented according to parameters that depend on the fuel properties and engine wall temperature. Also, the results were influenced by in-cylinder flow such as the intake flow, back flow and so on.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2006

In order to strengthen the competitiveness of port against calling for the huge vessel and reducing the shipping service time, the productivity of container terminal must be improved. This productivity variously results according to the kinds of productivity evaluation model, input elements like yard, equipment, employee, facility, etc,. But, it is discussed that the productivity is measured by partial productivity evaluation model or general input elements. Therefore, we measured for the productivity of the container terminal using the Developed the data Envelopment Analysis (DEA), which is developed in order to evaluate the relative efficiency of decision making units - it's difficult to clear cause and effect between input and output. We measured the whole productivity of container terminal in Busan according to decision of the correct input elements. And we investigated the change of the productivity measurement result according to input elements, presents more accurate productivity evaluation model in container terminal.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.1
• /
• pp.49-56
• /
• 1997

It is the developing policy of fishing village of korea that the fishermen are not to leave their fishing village by the construction of abandant and rich fishing village in the social, cultural and economic side of view. The government has promoted the project to improve the fishing and agrarian village from 1992 year, but it is not so helpful to solve the problem of the island and fishing village. Therefore, it has to improve the structure of fishing village and to develope the vital and lively fishing village, Japan had enacted the special law for the promotion of out-island which was called the law for the promotion of Ri-do isalnd, and commenced to develop the Ri-do island. The law for the promotion of Ri-do island is limited to 10 years, but it was amended 10 times and Japanese government has invested as many as budget to Ri-do isalnd during 30 years. Korean government also had enacted and enforced the special law for the promotion of out-isalnd developement referring to Japanese system. However, it is neccessary at first to improve the system that the fishing village is able to develope the fishing port in order to make higher the efficiency of investment. Moverover, the earning differentials bewteen the city and the fishing village has to decrease by the developement of transport convenience and pavement of the road of the out-isalnd and remote fishing village. Otherwise, it is requested rapidily to set up the welfare policy for the aged people because the inhabitants of fishing village become to great age, and inhabitants could be at least diagnose one time every week in the good medical facilities. The ministry of marine and fisheries has to permit the sports fishing business by the small fishing vessel in order to increase the income of inhabitants of fishing village and put a lot of the fishing reefs which are constructed to 2-3 story into the sea. And then the sports fishing business will be flourish by the small fishing vessel.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.619-626
• /
• 2016

The new 1.4 L turbocharged LPG direct injection (T-LPDI) engine is presented in this paper to improve the fuel efficiency of the vehicles installed with the 2.0 L LPG port fuel injection (LPI) engine, while maintaining the performance as a downsizing concept for the new engine platform development. Firstly, the return type high pressure LPG fuel supply system is designed and mounted in the new 1.4 L T-LPDI engine. As a result, this new engine shows a much better WOT performance and approximately 8 % of improved fuel economy level, as compared to the 2.0 L LPI vehicle. Secondly, the LPDI engine specific optimized design for high pressure fuel components and fuel injection control strategies are proposed and evaluated in order to overcome the restartability problem in a heat-soaked condition called the vapor lock phenomenon. Consequently, these experimental results illustrate a great potential for the developed 1.4 L T-LPDI engine as a possible substitute for the 2.0 L LPI engine.