• Structural Engineering and Mechanics
• /
• 제78권4호
• /
• pp.379-386
• /
• 2021

A numerical and computer simulation for dynamic stability analysis of graded porous nanoplates has been provided using a Chebyshev-Ritz-Bolotin approach. The nanoplate has been formulated according to the nonlocal elasticity and a 3-unkown plate model capturing neutral surface location. All of material properties are assumed to be dependent of porosity factor which determines the amount or volume of pores. The nano-size plate has also been assumed to be under temperature and moisture variation. It will be shown that stability boundaries of the nanoplate are dependent on static and dynamical load factors, porosity factor, temperature variation and nonlocal parameter.

• 설비공학논문집
• /
• 제24권5호
• /
• pp.415-421
• /
• 2012

Stirling engine is an external combustion engine, whose efficiency approaches that of Carnot engine with the help of a regenerator. The regenerator is a heat exchanger composed of porous medium, whose performance is dependent on the pore structure. Three types of pore structures are considered in the present study. They are wire screen, random wire and composite structure, i.e. a combination of wire screens with different hydraulic diameters. The porosity more highly affects the performance of a regenerator compared to the hydraulic diameter. The random wire can yield high effectiveness even at a high porosity. The composite mesh gives better performance when the hydraulic diameter decreases in the direction from hot side to cold side.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1439-1446
• /
• 2006

The fatigue test of the fillet weldments was executed with different beveling angles and porosities. The beveling angles of $0^{\circ}$, $45^{\circ}$ and $55^{\circ}$ were compared with fatigue lives. After the fillet weldment failure, the porosities which found at the fractured surface were observed to account the effect on fatigue life. Finite element analysis was performed to correlate the fatigue strength and the sizes and the locations of porosities. The stress-strain field was severely affected by the length of notch and the sizes and locations of porosities. Based on the quantitative analysis of porosity effect, the total volume of porosities was a key factor for fatigue strength of the fillet weldment.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.23-31
• /
• 2009

The interaction of incident monochromatic waves with a bottom-mounted vertical porous circular cylinder is investigated using the framework of the three-dimensional linear potential theory. The porosity of the circular cylinder is uniform vertically but varies in the circumferential direction. By adjusting the porosities of the circular cylinder, both the wave blocking performance of a porous semi-circular breakwater and the wave responses inside a circular harbor with an entrance are applied as calculation examples. It is found that the reflected waves, wave run-up, and wave forces are significantly reduced due to wall porosity, which are positive factors for a breakwater, and the amplification factor of a circular harbor at resonant frequencies is greatly reduced by a porous sidewall.

• 한국세라믹학회지
• /
• 제35권4호
• /
• pp.399-405
• /
• 1998

The effect of each factor on the porosity and mean pore size of cordierite(2Mg$.$2{{{{ {Al}_{2 } {O }_{3 } }}$.$5{{{{ {SiO}_{2 } }}) ceram-ics which have been mainly used for hot gas filter was investigated by using orthogonal array. The poros-ity was observed to increase with the content of graphite added as pore-forming material and decrease with increasing talc size. The effects of the other factors the graphite size sintering temperature and hold-ing time at sintering temperature were observed to be small relatively. In case of mean pore size the ef-fect of talc size on the mean pore size of cordierity was investigated to be the largest. The mean pore size was observed to increase with increasing talc size.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.13-17
• /
• 2016

It is highlighted that increasing the adsorbent surface area on volumetric basis is very important in providing an easy access for gas molecules. Fine particles around $3{\mu}m$ of soft-burned dolomite kiln dust (SB-DKD) were hydrated to wet slurry samples by ball mill process and then placed in a chamber to use spray dryer method. Spherical granules with particle size distribution of $50{\sim}60{\mu}m$ were prepared under the experimental condition with or without addition of a pore-forming agent. The relationship between bead size of the pore-forming agent and size of SB-DKD particles is the most significant factor in preparation of spherical granules with a high porosity. Whereas addition of smaller beads than SB-DKD resulted in almost no change in the surface porosity of spherical granules, addition of larger beads than SB-DKD contributed to obtaining of the particles with both 15 times larger average pore volume and 1 order of magnitude larger porosity. It is considered that spherical granules with improved $N_2$ gas adsorption ability may also be utilized for other atmospheric gas adsorption.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.316-321
• /
• 2003

The spatter and porosity could be occurred during $CO_2$ CW laser welding of Primer-coated Steel for Shipbuilding. This study has suggested an alternative idea by examining of weld-defect formation mechanism. The primer-coated plate has caused the spatter, humping bead and porosity and these are main part of the welding defect, attributed to the powerful vaporizing pressure of primer attached on the base metal. The zinc of primer has a boiling point that is the lower temperature than melting point of steel. Zinc va}X)f will build up at the interface between the two sheets and this tends to deteriorate the quality of the weld by ejecting weld material from lap position or leaving porosity. Therefore introducing a small gap clearance in the lap position, the zinc vapor could escape through it and sound weld beads can be acquired. In conclusion, we suggested the occurred and prevented mechanism of weld defects with searching the factor.

• 유기물자원화
• /
• 제23권4호
• /
• pp.52-62
• /
• 2015

본 연구에서는 퇴비화공정에서 첨가재로 주로 사용되는 톱밥을 대상으로 톱밥 내 공기투과성 변화에 영향을 미치고 있는 요인별 특성과 총차감압력에 미치는 기여도를 평가하였다. 공기투과성 변화에의 영향요소로서 층류속도(v), 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v), 입자크기(SIZE*v)를 선정하여 차감압력 산정을 위한 회귀식을 제시하였다. 차감압력에의 증가요인은 층류속도(v)와 입자크기(SIZE*v)이며, 감소요인은 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v)이다. 공기유입속도를 높이면 총차감압력이 지속적으로 증가하였으며, 이러한 총차감압력 변화에 영향을 크게 미치는 증가요인은 입자크기(SIZE*v)이며, 감소요인은 공기공극률(AFP*v)이다. 또한 총차감압력에의 증가기여도는 낮은 유속에서는 층류속도(v)가 높은 유속에서는 입자크기(SIZE*v)의 기여도가 높았으며, 감소기여도는 공기공극률(AFP*v)이 가장 높았다. 반면에 수분함량 변화에 따른 총차감압력 변화는 그리 크지 않았다. 따라서 총차감압력은 증가요인보다는 감소요인인 공기공극률(AFP*v)과 수분함량(MC*v)에 의하여 영향을 받고 있음을 알 수 있다. 본 연구결과로서, 효율적 퇴비화공정을 위하여는 적정 수분함량 유지와 함께 공기공극률이 높은 첨가재를 선정하여 공기투과성을 향상시키는 방법이 적절할 것이다.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.46-56
• /
• 1998

The objective of this study was to investigate the relationship between water vapor diffusion properties and the pore structure of paper. Gas-phase molecular diffusivity of water vapor through pores was determined based on the kinetic theory of gas. A mathematical model was derived to characterize the dimensional changes of the pore caused by the fiber-swelling mechanism. A modified-Fickean diffusion model was designed to simulate the water-vapor diffusion phenomena in porous paper web. Structural characterisocs of paper pores including the tortuosity and the shape factor was studied on a theoretical basis of Knudsen flow diffusion. Results are summarized as follows: 1. The theoretical water vapor diffusivity in gas-phase was 0.092$cm^2$ /min, 2. Porosity was inversely proportional to the degree of wet-swelling of paper, 3. Solid-phase water-diffusivity of fiber was 1.2 $ \times 10^{-5}cm^2/min$, 4. Modified diffusion model was fairly consistent to the experimental data (from part I), and 5. The Fickean pore tortuosity, ranging from 1,000 to 2,500, was in inverse proportion to the porosity of paper, and the Knudsen shape factor and length-angle factor for micro-pores in paper were 0.5~3.5 and about 340, respectively.

• 아시안잔디학회지
• /
• 제24권2호
• /
• pp.205-210
• /
• 2010

본 연구는 코스조성에 주로 사용되는 4종의 토양개량제의 혼합비율에 따른 모래상토의 물리화학적 특성변화를 조사한 결과이다. 토양개량제의 혼합비율에 따라 상토의 물리화학성을 조사한 결과 peat, humate, peatmoss 및 zeolite는 pH와 CEC에서 고도의 상관성(P<0.01)을 나타내어 토양개량제의 특성에 따라 상토의 토양화학성에 영향을 주었다. 상토의 토양물리성 결과를 통해 USGA 기준으로 평가할 때, 최적의 혼합비율은 토양개량제 peat, humate 및 peatmoss는 각각 5%, 3%, 7%이고, zeolite에서는 적합한 비율을 찾을 수 없었다. 각 토양개량제들의 혼합에 따른 토양물리성 변화에서 가장 중요한 요인은 비모세관공극으로 총공극과 수리전도도의 변화에 영향을 미쳤다. 토양개량제의 혼합비율에 따른 토양개선효과를 비교할 때, peat와 peatmoss는 토양 모세관공극 및 수리전도도에서, humate는 수리전도도에서, zeolite는 비모세관공극과 총공극에서 고도의 상관성을 나타내었다(P<0.05). 이들 결과를 통해 골프코스의 상토조성에 사용되는 토양개량제의 종류와 특성 및 혼합비율이 USGA 상토의 근권층 개량과 토양 이 화학성에 영향을 미치고 있음을 알 수 있었다.