• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.277-282
• /
• 2004

In a hardened concrete, diffusion of oxygen, carbon dioxide, aggressive ions, and moisture from the environment to the concrete takes place through the pore network. It is well known that making dense cement matrix enhances the durability of concrete as well as all the characteristics including strength of concrete. In this paper,9 mix concretes with water to cementitious material ratio (40,45, and $50\%$) and replacement ratio of GGBFS (40 and $60\%$ of cement by weight) were studied on the micro-pore structure by mercury intrusion porosimetry and the accelerated chloride diffusion test by potential difference. From the results the average pore diameter and accelerated chloride diffusivity of concrete were ordered NPC > G4C > G6C. It is concluded that there is a good correlation between the average pore diameter and the chloride diffusivity, and the mineral admixtures has a filling effect, which increases the tortuosity of pore and makes large pores finer, on the pore structure of cement matrix due to the latent hydraulic reaction with hydrates of cement.

• 광물과 암석
• /
• 제34권4호
• /
• pp.209-218
• /
• 2021

비전통(unconventional) 에너지 자원 중 최근 각광받고 있는 셰일 가스의 회수율을 높이기 위해서는 저류층의 공극 구조 연구가 필수적이다. 본 연구에서는 대면적으로 입자나 형상 분포를 확인 할 수 있도록 개발된 분석 장치인 대면적 자동화 입자 분석 시스템(Scanning Electron Microscope Particle Analysis, SELPA)을 활용하여 셰일 가스 저류층 시료의 공극 분포를 관찰하였다. 본 연구에서는 리아드 분지에서 시추된 A-068 시추공 시료 중 방해석이 주 구성 광물인 시료를 대상으로 연구를 수행하였다. SELPA를 이용하여 시료 내 수십 나노에서 수백 마이크로미터 크기의 공극을 관찰하였고 각 공극의 크기 별 비율을 확인하였다. 같은 영역의 표면을 대상으로 각각 1000배, 3000배, 5000배의 배율로 이미지를 관찰하여 공극의 분포를 확인한 결과 최소 3000배 이상의 배율에서 관찰해야 100 nm 이하의 공극까지 관찰되어 작은 스케일의 공극 분포까지 분석할 수 있는 것이 확인되었다. 본 연구에서 소개된 방법론을 통해 셰일 가스 저류층을 포함한 비전통 자원의 저류층 내공극의 분포를 단시간에 파악할 수 있는 방법론이 확인되었으며 향후 비전통 저류층 내 공극 구조 파악에 활용할 수 있을 것이 기대된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권1호
• /
• pp.49-58
• /
• 2017

Biotic ligand model (BLM) and species sensitivity distribution (SSD) were used to determine the site-specific Cu threshold concentration (5% hazardous concentration; HC5) in soil pore water. Model parameters for Cu-BLM were collected for six plants, one collembola, and two earthworms from published literatures. Half maximal effective concentration ($EC_{50}\{Cu^{2+}\}$), expressed as $Cu^{2+}$ activity, was calculated based on activities of major cations and the collected Cu-BLM parameters. The $EC_{50}\{Cu^{2+}\}$ varied from 2 nM to $251{\mu}M$ according to the variation in environmental factors of soil pore water (pH, major cation/anion concentrations) and the type of species. Hazardous activity for 5% (HA5) and HC5 calculated from SSD varied from 0.076 to $0.4{\mu}g/L$ and 0.4 to $83.4{\mu}g/L$, respectively. HA5 and HC5 significantly decreased with the increase in pH in the region with pH less than 7 due to the decrease in competition with $H^+$ and $Cu^{2+}$. In the region with pH more than 7, HC5 increased with the increase in pH due to the formation of complexes of Cu with inorganic ligands. In the presence of dissolved organic carbon (DOC), Cu and DOC form a complex, which decreases $Cu^{2+}$ activity in soil pore water, resulting in up to 292-fold increase in HC5 from 0.48 to $140{\mu}g/L$.

• 대한화학회지
• /
• 제16권6호
• /
• pp.341-348
• /
• 1972

질소의 흡착 등온곡선을 이용하여 흡착체의 동공부피 분포를 계산하는 과정에서 표면장력의 곡률 의존도 고려 효과를 조사하였다. 즉, 장세헌 등에 의한 표면장력의 곡률 의존도식과 캘빈 식으로부터 주어진 압력에서의 캘빈반경을 구하고, 이것으로부터 흡착체의 동공부피 분포를 계산하였다. 이와 같이하여 얻은 계산 결과를 표면장력의 곡률 의존도를 고려하지 아니한 종래방법에 의한 계산 결과와 비교하였다. 일반적으로 곡률 의존도를 고려해주면 동공부피 분포 곡선의 극대부분이 큰 동공 쪽으로 이동한다. 또한 모세관 응축이 일어나는 상대압력이 종래까지 생각했던 것보다 훨씬 낮아지고 있다. 이러한 효과들은 흡착체의 동공들이 미세해 질수록 더욱 현저하게 일어난다.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.7-13
• /
• 2007

Effects of pulp type, refining and filler type on the pore characteristics and physical properties of paper were investigated. HwBKP, SwBKP and BCTMP are used to study the effect of pulp type in this study. The effects of each filler (PCC, GCC and talc) and the combination of PCC/GCC were also studied. Highest bulk, pore volume and light scattering are obtained from BCTMP and PCC. It was found that the pore size and pore volume are important in light scattering in paper structure. It was found that PCC was the most effective filler for the improvement of the bulk and light scattering because of the increase in pore volume which can scatter light, but the increase of PCC content was not so effective in the improvement of bulk.

• Carbon letters
• /
• 제9권2호
• /
• pp.137-144
• /
• 2008

The commercial activated carbons are typically prepared by activation from coconut shell char or coal char containing lots of inorganic impurities. They also have pore structure and pore size distribution depending on nanostructure of precursor materials. In this study, two types of commercial activated carbons were applied for EDLC electrode by removing impurities with acid treatments, and controlling pore size distribution and contents of functional group with heat treatment. The effect of the surface functional groups on electrochemical performance of the activated carbon electrodes was investigated. The initial gravimetric and volumetric capacitance of coconut based activated carbon electrode which was acid treated by $HNO_3$ and then heat treated at $800^{\circ}C$ were 90 F/g and 42 F/cc respectively showing 94% of charge-discharge efficiency. Such a good electrochemical performance can be possibly applied to the medium capacitance of EDLC.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1989년도 추계 학술발표회 강연집
• /
• pp.1.3-25
• /
• 1989

This paper describes procedures and the results of mineralogical, fabric and pore sixte analyses perforied on four shales to understand time-dependent deforiation behav iour of swell ins shales better. Mineralogical compositions of theme shales are eBtablished froi the results of X-ray diffraction snalysis and chemical analyses. The importance of the fabric in the understanding of swelling behaviour of shales is demonstrated using Scanning Electron Microscope (SRI). The change in pore sixte distribution during the process of swelling is investigated by measuring pore size distribution before and after free swell test. The results Of the Present study imply that the swelling of Shales studied is not attributed to minerals like pyritei anhydrite or swelling clay minerals. The anisotropic swelling behaviour of shales studied ray be explained by fabrics of theme shales and the difference in them. The swelling of theme shales is found to be accoipanied by increase in the volute of pores.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.52-52
• /
• 2002

Recently, nanoporous low-k materials using porogen (pore generating material) template method have gained much attraction due to the feasible advantage of dielectric constant decrease with the increase of porogen content, which is burning out and making air void by thermal curing. In nanoporous thin films, further, control of pore size and its distribution is very important to retain suitable thermal, mechanical and electrical properties. In this study, nanoporous low-k films were prepared with MTMS-BTMSE copolymer and porogen. The effect of interaction of copolymer matrix and porogen on pore size and distribution was comparatively to investigate with molecular structure and end functional group. The characterization of nanoporous thin film prepared was also performed using various techniques including NMR, GPC, Ellipsometer, FE-SEM, TGA, and FT-IR.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.502-509
• /
• 2011

In this study, a novel-processing route for fabricating microcellular zirconia ceramics has been developed. The proposed strategy for making the microcellula zirconia ceramics involved hollow microspheres as pore former. Compared to conventional dense microspheres pore former, well-defined pore structured zirconia ceramics were successfully fabricated. Effects of hollow microsphere content and sintering temperature on microstructure, porosity, pore distribution, and strength were investigated in the processing of microcellular zirconia ceramics.

• Carbon letters
• /
• 제7권4호
• /
• pp.271-276
• /
• 2006

Porous carbon materials were prepared with a thermal treatment of coal tar pitch at 550 in the Ar gas. Growth, merger, and distribution of pore were characterized with scanning electron microscopy as variation ascending temperature gradient and chamber pressure. After graphitizing at the 2600 (1 hr.), walls and connecting parts between pores were investigated with X-ray diffraction patterns. Wall thickness and pore size decreases as increasing ascending temperature gradient, and pore size becomes homogeneous. Graphite quality and thermal conductivity become higher due to the enhanced orientation of walls and connecting parts between pores.