• 대한미생물학회지
• /
• 제20권1호
• /
• pp.91-102
• /
• 1985

The advantages of enzyme-linked immunosorbent assay(ELISA) are its senstivity and simplicity in detecting IgG, IgM and IgA antibody. To apply ELISA to diagnosis of typhoid fever, antigen such as lipopolysaccharide of Salmonella typhi or killed whole cell must be coated on solid phase. It is easy to coat lipopolysaccharide on ELISA plate but troublesome to purify it. As it is easy to obtain the killed whole cells, the development of the appropriate method by which those antigens of S. typhi are optimally coated on solid phase is needed. To establish the appropriate method, carbonate buffer, methanol or poly-L-lysine was applied as binding substance on polystyrene or polyvinylchloride plate as solid phase when the killed whole cell antigens of S. typhi varided as follows: $10^6$, $10^7$, $10^8$ and $10^9\;cell/ml$. The criteria of the optimal method were determined as follows: 1. The optical density of positive sera is above 1.0(0.6 in IgM) at 1:10 serum dilution and is 0.3(0.2 in IgM) higher than that of negative sera: 2. The O.D. of sera is flat or lowering according to serum dilution: 3. It must be that the O.D. of negative sera is lower than 0.2 at the point of serum dilution where the O.D. of positive sera is higher than 1.0(0.5 in IgM). The results obtained were summarized as follows: 1. The methods which fitted the above criteria were to use poly-L-lysine as binding substance, polyvinylchloride plate as solid phase and $10^7\;cell/ml$ as antigen concentration of S. typhi(poly-L-lysine/polyvinylchloride/$10^7$) and poly-L-lysine/polyvinylchloride/$10^8$ in detecting IgG antibody, methanol/polystyrene/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgM and carbonate buffer/polystyrene/$10^8$, carbonate buffer/polystyrene/$10^9$, methanol/polystyrene/$10^8$, methanol/polyvinylchloride/$10^8$, methanol/polyvinylchloride/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgA. 2. The coaling method using poly-L-lysine, polyvinylchloride plate and $10^8\;cell/ml$ was best to assay IgG, IgM and IgA antibody all in one. By this method, to assay the each immunoglobulin calss with an appropriate fixed serum dilution, 1:320 dilution was best.

• 전기의세계
• /
• 제26권2호
• /
• pp.89-94
• /
• 1977

In order to investigate the properties of radiation resistance together with dielectric, and mechanical relaxation behaviors of polyvinylcholoride exposed to several different doses under the .gamma.-ray of Co$^{60}$ source, several observations were carried out on the exposed specimens propared by mixing dibutyl-tin-dilaulate and dibutyl-tin-dimaleate as stabilizer with or without adding dioctyl-phthalate as plasticizer. Conclusions obtained from the study are as follows: The origin of the absorption band at 1,540-1,640$cm^{-1}$ / on I.R. spectrum seems to be RCOO- ion originated from ionization of the stabilizer, and this peak can be useful as a measure of radiation resistance on polyvinylchloride. Addition of increasing plasticizer to polyvinylchloride exhibits increasing radiation resistance and the reason for this result may be attributed to aromatic resonance absorption of radiation energy by diotylphthalate. On dose dependent dielectric characteristics, nonplastized specimen shows a peak at about 10 Mrad and that this peak disappears on the plastification of specimens. Those phenomena may be explainable in considering the statistical distribution of scissored chain molecular segments as well as the plastification process of plasticizer to polyvinylchloride chain molecules.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1997년도 가을 학술발표회 프로그램
• /
• pp.58-58
• /
• 1997

The corrosion rate of polymer polyethylene terephtalate and polyvinylchloride was characterized at various condition by potentiostate / galvanostate method. The cell and working electrode used for this study was specially preparatain, The potential was scanned at foward scan -2V to 3V and reward scan 3V to -2V, at 50mv/s (R: auto - compensation).

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.91-98
• /
• 1998

In this study, we carried out the experiments for measuring the variations of corrosion potential and current density for polarization curves with polyvinylchloride. The results exhibited especially the influence affecting the corrosion potential and various conditions (temperature, day, pH, bacteria, and added salt). The second anodic current density peak and the minimum passive current density are designated $I_P/I_0,$ respectively. The value of $I_P/I_O$ is used as a measurement for the extent of degradation of the polyvinylchloride. The potentiodpnamics parameters of the corrosion were obtained using Tafel equation.

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.217-226
• /
• 2009

The combustion reaction of polyvinylchloride(PVC) was investigated using a thermogravimetric technique under an air atmosphere condition at several heating rates from 10 to $50^{\circ}C$/min. To obtain information on the kinetic parameters, the dynamic thermogravimetric analysis curve and its derivative were analyzed by a variety of analytical methods such as Kissinger, Friedman, Chatterjee-Conrad, Ozawa and Coats-Redfern methods. The combustion reaction of PVC proceeded in two steps; the first step was caused by the dehydrochlorination process in PVC, and the second step by the combustion of polyene. The comparative works for the kinetic results obtained from various methods should be performed to determine the kinetic parameters, because there are tremendous differences in the calculated kinetic parameters depending upon the mathematical method taken in the analysis.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.250-255
• /
• 2010

비뉴톤 점탄성 Maxwell 요소와 탄성 스프링으로 이루어진 3 요소 비뉴톤 모델로부터 응력완화 식을 유도하였다. 이 식을 응력완화 실험 결과에 적용하여 여러 가지 모델 파라메타를 계산하였다. 모델 파라메타로부터 계산한 이론 곡선은 실험적인 응력완화 곡선과 잘 일치하였다. 비선형 점탄성 모델 파라메타로부터 섬유고분자 물질의 홀부피, 미세구조, 점탄성성질, 역학적인 성질 등을 연구하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였으며, 시료는 두 종류의 polyacrylonitrile-polyvinylchloride 공중합체와 또 다른 두 종류의 PVC 모노 필라멘트 섬유를 여러 온도의 공기와 물속에서 응력완화 실험을 하였다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권3호
• /
• pp.159-167
• /
• 1999

This study performed experiments for measuring corrosion potential and current density variations in the polarzation curves of polyvinylchloride. The results were examined to identify particular influences affectingthe corrosion potential such as temperature, pH, enzyme, and salt. The lines representing active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme and salt. The Tafel slope for the anodic dissolution was determined using the polarization effect with varying conditions. The slope of the polarization curves describing the active-to-passive transition region was noticeably shifted in the potential direction. In addition, using the variation in conditions, the best temperature and pH were determined for the corrosion rate, and resistance of corrosion. The second anodic current density peak and maximum passive current density were designated as degraded(IP/I0). The value of IP/I0 was used in measuring the extent of the degradation of the polyvinychloride. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• 한국포장학회지
• /
• 제14권2호
• /
• pp.53-56
• /
• 2008

Polyvinylchloride(PVC) is variously used to produce food packaging, wrap film, sealing compound of drinking bottle cap. Safety of these PVC food package is controlled by Food Code, PVC regulation. This study was carried out researches on manufacture process, physical, chemical properties and monomer(CAS No., common name, molecular structure) of PVC to help the understanding of PVC material. Also, this study helps us the understanding of regulation through researches on the foundation of PVC regulation, the purpose of test and the comment of test method. It is considered that these informations of material properties and explanations of test method are very useful to PVC producers, users and analyzers of them.

• Journal of Radiation Protection and Research
• /
• 제3권1호
• /
• pp.23-28
• /
• 1978

유기석계(有機錫系) 안정제(安定劑)를 포함하고 있는 polyvinylchloride (PVC)의 내방사성(耐放射性)은 가소제(可塑劑)로서 첨가된 dioctylphthalate(DOP)의 양의 증가와 더부러 증가하며 이와 같은 내방사성(耐放射性)의 평가는 시료의 IR 특성 상에서 안정제의 해이(解離)에 기인(起因)하고 있는 $1,540{\sim}1,640cm^{-1}$에서의 흡수대가 선량과 더부러 변화하는 거동으로 살필 수 있다. 가소화된 PVC에서의 내방사성의 증가는 DOP 분자구조의 일부를 형성하는 benzen 환(環)에서 방사 에너지가 공명흡수 되기 때문이라 사료(思料)되며 이와 같은 견해(見解)는 방사선량에 대한 도전율변화특성(導電率變化特性)의 고찰 결과와도 잘 일치 한다. 실용적면(實用的面)에서 $0{\sim}100Mrad$ 사이의 선량에 대한 충분(充分)한 내방사성(耐放射性)을 얻기 위하여는 30phr 전후의 DOP 첨가량이 필요하다.

• 공업화학
• /
• 제33권4호
• /
• pp.367-372
• /
• 2022

폴리염화비닐(polyvinylchloride, PVC)-tetrahydrofuran (THF) 용액에 PVC 비용매의 첨가와 박막 건조 공정이 PVC 박막에 미치는 영향을 분석하였다. 사용된 비용매는 알코올과 비알코올계로 구성되었으며, 첨가에 따른 PVC 박막의 표면 거칠기와 표면 형상의 차별성에 따른 소수성 성질을 비교하였다. PVC-THF 용액 제조과정에 발생하는 용액 내 기포 함유가 박막의 표면 구조에 미치는 영향이 큼을 확인하였다. 상대적인 고농도 PVC-THF 용액에서 코팅 박막의 정상적 표면 물성을 구현하기 위하여 적절한 박막 건조법의 선택이 요구된다. 알코올계 비용매를 첨가할 경우 과립형 형상의 다공성 표면을 갖는 PVC 박막이 얻어져 초소수성 특성을 보인다. 비용매에 대한 PVC-THF 용액의 부피 비는 코팅 박막의 표면 형상에 영향을 주며, 비용매 첨가량이 많을수록 초소수성 PVC 박막을 형성하는 데 유리하다.