• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.131-139
• /
• 2020

The current study focused on the preparation of low-cost PVC-based adsorbing membrane. Metakaolin, as available adsorbent, was embedded into the PVC matrix via solution blending method. The as-prepared PVC/metakaolin mixed matrix membranes were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), pure water permeability and contact angle measurements. The results confirmed the improvement of PWP and hydrophilicity due to the presence of metakaolin in the PVC matrix. Additionally the structure of PVC membrane was changed due to the incorporation of metakaolin in the polymer matrix. The static adsorption capacity of all samples was determined through dye removal. The effect of metakaolin dosage (0-7%) and pH (4, 8, 12) on dye adsorption capacity was investigated. The results depicted that the highest adsorption capacity was achieved at pH of 4 for all samples. Additionally, adsorption data were fitted on Langmuir, Freundlich, and Temkin models to determine the appropriate governing isotherm model. Finally, the dynamic adsorption capacity of the optimum PVC/metakaolin membrane was studied using dead-end filtration cell. The dye removal efficiency was determined for pure PVC and PVC/metakaolin membrane. The results demonstrated that PVC/metakaolin mixed matrix membrane had a high adsorption capacity for dye removal from aqueous solution.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.597-601
• /
• 2001

Waste plastics amount is more than 3.5 million tons and 30% of industrial waste in 1998, Korea but recycling rate of industrial waste plastics is quite low because the material separation technology from the mixed waste plastic powders is not commercially available so far. This study covers the triboelectrostatic separation of polyvinylchloride (PVC) materials collection chambers and controllers. PVC and PET powders can be imparted negative and positive surface charges, respectively, due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. The extract content and yield of PVC separation from the mixed PVC and PET plastic powders are 90.0% and 98.2%, respectively. The electrostatic separation system using the fluidized bed tribocharger shows the potential to be an effective method for removing PVC materials from other mixed plastics.

• 멤브레인
• /
• 제3권3호
• /
• pp.136-139
• /
• 1993

It is well known that the membrane permeation in pervaporation is governed by both the chemical nature of the membrane material and the physical structure of the membrane and also the separation can be achieved by differences in either solubility, size or shape. The solubility of the penerrant in the polymeric membrane can be described qualitively by applying the Hildebrand relation [1] which relates the energy of mixing of the penerrant and the polymer material. Froehling et al. have tried to predict the swelling behavior of polymers for the systems of polyvinylchloride(PVC)-toluene-methanol, PVC-trichloroethylene-nitromethane and PVC-n-butylacetate-nitromethane[2]. The former two systems which do not show the donor/acceptor interactions upon mixing showed the successful results[2]. In addition to this technique, there are several other possible approaches to predict the swelling behaviors of polymers, such as the surface thermodynamic approach[3, 4], the comparison of the membrane polarity with the solvent polarity in terms of Dimroth's solvent polarity value[5].

• 약학회지
• /
• 제23권3_4호
• /
• pp.147-152
• /
• 1979

Experiments were carried out to investigate for the interaction between FAD solution and synthetic resin containers made of polyvinylchloride(PVC), polyethylene(PE), and polycarbonate(PC), and for the effect of glycyrrhizine or malic acid on stabilization of FAD in aqueous solution by accelerated stability analysis. Analysis of FAD was determined by means of spectrometer and by separating by paper chromatography and metal ions were detected by atomic absorption spectrophotometer, which were extracted from containers by means of Food and Additive Regulation Standard. The thermal decomposition of FAD in aqueous solution was pseudo first order reaction and it was inhibited by adding glycyrrhizine or malic into the solution. PVC, PE and PC containers accelerated the decomposition of FAD in solution. It is assumed that bivalent heavy metals in resin containers may catalize the hydrolysis of FAD. The metals detected from the containers were Ca, Zn, Cu, Fe, Pb and Cd. And the total amounts of detected metals from PVC were 6.2mcg/cm$^{2}$, PE, 5.5mcg/cm$^{2}$, and PC, 2.7mcg/cm$^{2}$ which were proportional to the rate constant of FAD decomposition in aqueous solution.

• 접착 및 계면
• /
• 제15권1호
• /
• pp.1-8
• /
• 2014

이온 교환막은 전기투석, 확산투석, Redox flow 전지, 연료전지 등 다양하고 넓은 분야에서 사용되고 있다. 초음파를 이용하여 만들어진 PVC 양이온 교환막을 시간을 변화시켜 가면서 술폰화 반응에 의해 제조하였다. 술폰화제로 황산을 사용하였으며, 술폰화 PVC 양이온 교환막의 기본구조와 특성을 FT-IR, EDX, Water uptake, 이온교환용량(IEC), 전기저항(ER), 전도도, 이온수송수 및 표면 morphology를 SEM 분석하였다. FT-IR 스펙트럼 분석결과 술폰화 PVC 양이온 교환막에 술폰산기가 도입되었음을 확인하였으며 멤브레인의 Water uptake, IEC, 전기 저항 및 ion transport number의 최대값은 각각 40.2%, 0.87 meq/g, $35.2{\Omega}{\cdot}cm^2$ 및 0.88이었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.68-69
• /
• 1998

1. 서론 : 고분자/액정 복합막은 액정의 높은 분자운동성이 물질의확산에 기여하여 우수한 투과성을 나타낸다. 이 막은 3차원의 망상구조를 갖는 매트릭스 고분자내에 액정이 연속상으로 안정하게 분산된 상분리 구조를 가지고 있다. 이 복합막은 그러한 상분리 구조에 기인하여 자기지지형(self support LC) 복합막이라고도 한다. 복합막 중에 액정은 탄화수소가스에 대하여 높은 선택성을 나타내어 막속으로 흡착을 촉진하고 액정물질이 결정에서 액정으로 변화는 전이온도에서 투과계수가 100-200 증가한다고 보고하였다. (생략)

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 춘계 총회 및 학술발표회
• /
• pp.15-18
• /
• 1991

본 연구에서는 박막화를 위한 수면전개법을 이용하여 기체분리능을 향상시키기 위한 복합막을 개발하고자 수면전개 적층복합막을 제조하여 기체투과특성실험을 행하였다. 실험에 사용한 고분자재질은 투과성이 우수한 Cellulose Acetate(CA)와 Polystyrene(PS)을, 선택성이 우수한 Polyvinylchloride(PVC)이었다. 이들 막에 대한 적층형태와 방법에 대한 효과를 검토하고 blend막과도 기체투과특성을 비교하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1485-1495
• /
• 2003

We investigate the triboelectrostatic separation of polyvinylchloride (PVC) from mixed plastics in the laboratory scale triboelectrostatic separation system. The flow and electric fields in the precipitator are obtained from the numerical solution of finite volume method. Using these flow and electric fields, we solved the particle motion equation considering the inertia, drag, gravity and electrostatic forces acted on the particles. The particle trajectories are obtained using a Lagrangian method as a function of different important variables such as Reynolds number, Stokes number, electrostatic force, electric charge and electric field distribution, inclined angle of plane electrodes, particle rebounding, particle charge decay rate after impact on the electrode surface, etc., in order to determine the optimal design conditions. The present predicted results for the cumulative yield represent well the experimental ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.538-543
• /
• 2000

The purpose of this study is to develope electrostatic separation system for recycling of mixed waste plastics. The electrostatic separation system is designed and investigated the separation efficiency for separating of mixed waste plastics. Electrostatic separation system consisted of a tribocharger, separator (two electrode), collector (5 tray) and controller (positive/negative high voltage power supply). The tribocharger is a fluidized bed using tribo-electrification mechanism between particles and particles. In experimental results, the tribocharger of the fluidized bed was more effective separation efficiency. It showed the purity of $85{\sim}99\;%$ and the recovery of $80{\sim}98\;%$ from the powder of mixed plastics such as LDPE, HDPE, PP, PS, PET and PVC. Especially, In the separation experiment of Polyvinylchloride(PVC) which generates hazardous hydrogen chloride gas in case of the combustion. its purity was over 99 % and recovery was over 95 %.

• 공업화학
• /
• 제28권1호
• /
• pp.42-49
• /
• 2017

프탈레이트계 PVC 가소제를 대체하기 위해 식물유 기반 아세틸화 모노글리세라이드(AMG)계 가소제를 합성하여 PVC에 대한 가소성능을 평가하였다. 코코넛 오일과 글리세롤로부터 전이 에스테르화 반응과 아세틸화 반응을 거쳐 AMG-CoCo를 합성하였고 글리세롤 모노올리에이트(GMO)로부터 아세틸화 반응을 통해 AMG-GMO를 그리고 추가적으로 에폭시화 반응을 거쳐 AMG-GMO-Epoxy 합성하고 그 구조들을 확인하였다. AMG계 가소제의 열안정성을 평가한 결과, AMG-CoCo < AMG-GMO < AMG-GMO-Epoxy 순으로 열분해 온도가 높았으며 모두 상용 가소제인 DOP의 열분해 온도보다 높았다. AMG계 가소제를 함유한 PVC의 경우, 인장 신율은 770~810%, 인장 강도는 약 19~22 MPa로 DOP로 가소화된 PVC보다 우수하였다. DMA 분석 결과, AMG-GMO-Epoxy와 PVC는 매우 우수한 섞임성을 보여주었고 AMG-GMO-Epoxy를 50 phr 함유한 PVC의 $T_g$는 $24^{\circ}C$까지 감소하였다. 물에 대한 가소제의 용출 실험 결과, AMG-GMO와 AMG-GMO-Epoxy를 50 phr 포함한 PVC 경우 무게 감소가 약 2%와 1%로 내용출성이 매우 우수함을 알 수 있었다. 따라서 AMG-GMO-Epoxy가 DOP를 대체할 PVC 가소제로 경쟁력이 있다고 할 수 있다.